How to change the Y-axis scale for 100% stacked column to percentage ?

Hi,
I add a 100% stacked column chart to a report in Crystal Report for Enterprise. As default, the Y-axis scale shows value from 0 to 1 and the data labels display absoluted data value. Now I want the Y-axis scale to show value from 0% to 100% and the data labels to display percentage value.
Please tell me which option of the chart to adjust ?
Thanks
Mau Vu Huu
The default is like screenshot below:
I want it to display as screenshot below:
thanks
Mau Vu Huu

Looks like a bug in CR for Enterprise.
The same chart shows a scale from 0% to 100% in the CR 2011 designer whereas CR for Enterprise seems to show a number range from 0 to 1.
Here's a workaround:
1) Insert a Crosstab. 'Column' should be the field you wish to show on the 'X-axis'. 'Row' should be the field that you wish to stack up on the bars. Summary should be the measure field
2) Next, right-click one of the summary cells on the Crosstab > Select Format Total > Total > Check 'Show as Percentage of' > Grand Total > Row
3) Right-click the Crosstab > Select Create Chart from Crosstab Data
4) Suppress the section that holds the Crosstab
5) Right-click the chart > Edit Chart Type > Choose 'Stacked Column'
6) Highlight one of the numbers of the Y-axis > Select Format Total (Y) axis > Format > Currency > Choose 'Fixed' under 'Symbol Format' > Replace '$' under Symbol to '%' > Change Symbol Position to '-123$'.
-Abhilash

Similar Messages

How to change the Content-Transfer-Encoding for the fmddataa.fmd from base

Dear all,
When I using this SO_DOCUMENT_REPOSITORY_MANAGERto send email,I find the fmddata.fmd file have been changed to binary file attachment. I don't hope so.any one have good idea to avoid this case occur?
Can you tell me how to change the Content-Transfer-Encoding for the fmddata.fmd from base64 to quoted-printable. The quoted-printable is the Content-Transfer-Encoding for text file with extension .txt
Best Regards,
Merry

Thank you

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

How to change the contact sync settings for icloud? please advise

how to change the contact sync settings for icloud? please advise?

There are no settings to change. Assuming you are using Lion 10.7.2 (or 10.7.3) - which you should be - you simply sign in in System Preferences>iCloud and check 'Contacts' and any other data you want to sync.
If you are using an earlier system you will not be able to sync your contacts, and there is no workaround. However you can sync them with Google or Yahoo contacts, though I don't know how well this works.

Change the x axis scale markers in a waveform graph

Hello all,
I am looking at an unusual graphing problem that hopefully has been solved. The problem is because an pre-existing DAQ graph does things in a chart-like manner.
The application context is that I measure a signal vs. test length. During the test, I calculate the UUT position as a function of the test length. The test includes measurements out and back. Rather than graph signal vs. length; I want to graph signal vs. position. I have considered the XY graph, but that co-locates the position data. To remain consistent with an existing test program, I want to change the X Axis marker labels from distance to position at each marker's distance.
I would like to customize marker text for a waveform graph's X Axis. I found a sub-property node for marker text, but it does not seem to iterate through a Waveform graph's X Axis markers.
For example, a test measures the distance 0 to 200 and the X Axis markers are labeled {0, 50, 100, 150, 200}. How do I change those labels to {0, 50, 100, 50, 0}?
The Marker Values[] property node does not do what I expected.
Thanks,
Kenneth
Possible solutions:
1. Find a property node that does the job
2. Use custom indicators for each marker's labels
3. Use two graphs, one for forward, the other for reverse testing
4. XControls

For your option #4 I would use option #2 but use a single picture and hide the X-Axis and do my own.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to change the default admin password for IAS/UDDI

Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
How to change the default password
ias_admin/ias_admin123
http://xxx.xx.xxx.xx/uddi/publishing

Hello NJ,
I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
Thanks

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to change the interval real substance for DG-Filling

Hi,
Im performing the filling process, to fill the dangerous goods master with data records from specification management. It seems that most data is transferred successfully. Although I receive the following error message in the import log.
1. What does the interval means?
2. What does the interval influence?
3. How to change the interval in the following configuration object:
EHS > Dangerous Goods Management > Interfaces: Filling and Distribution > Filling > Specify Assignment Objects for Filling
4. How can I find out about which field it is about?
5. Is this really required to change?
Error message
No data records available in interval real substance through
Message no. DGA402
Diagnosis
You attempted to fill the dangerous goods master with data records from specification management. However, no data records exist in the interval real substance through real substance .
System Response
The dangerous goods master is not filled with data records.
Procedure
If required, change the interval limits.
Thanks,
Roy Derks

Hi,
pl. try with table TDG79, the fields as sources in specification management can be assigned to the fields as targets in the dangerous goods master. The default Customizing settings in the standard system within the scope of making filling more flexible guarantee that the filling process functions in the same way as in earlier version.
in this table, options available for user exits in the table TDG79. for example, fill interval values or units that deviate from the standard units.
Activities
Edit the IMG activity Specify Assignment Objects for Filling in Customizing for Dangerous Goods Management.
If u find complete solution, pl update the thread.
with regards,
mahesh.

How to change the background color only for one HTML-Portlet?

Hi all,
I have created a HTML-Portlet in my root-page. The root page have a style: Main-Style.
I want to change the background-color only for this one HTML-Portlet:
<html>
<header><title>Test</title></header>
<body bgcolor="#999999">
Test
</body>
</html>
But this does not work...
When I use the CSS, then it will change the background-color for the root-page too.
Thans
Leonid Pavlov

could you try this
<table bgcolor="#999999">
<tr>
<td>
test
</td>
</tr>
</table>
I don't think you need <html><header><title>Test</title></header>
<body></body></html> for your HTML-Portlet.

How to Change the default Search value for Field Role?

HI,
I went through numerous threads on how to default the search value , but does not help for my issue. Hence im posting this new thread. Please provide your suggestions on how to achieve this.
For the Ship-to party field (in item detail ) on webui when i do a F4 help i get the pop up with various search criteria and for the field Role the default value is "Ship-to party". which is visible. we need to change this default value to Prospect which is available in drop down.
The attribute is STRUCT.ROLE and view BP_HEAD_SEARCH/SearchHelp . The method GET_DQUERY_VALUEHELPS from the context node class is called to fill the value help for this attribute, but i dont understand how the ship-to party is filled as default. There is no code in this method to default the value.
The generic GET_V_S_STRUCT method also does not default the Ship-to party on this field.
I want to understand how this Ship-to party is filled by default and how can i change this to prospect..
Many Thanks,
Shaik

We had a same requirement of defaulting Sales org and division in search criteria for a specific value.
this can be doen by redefining "DO_PREPARE_OUTPUT" method in IMPL class for the respective view.
See the code:
METHOD do_prepare_output.
*CALL METHOD SUPER->DO_PREPARE_OUTPUT
** EXPORTING
**    iv_first_time = ABAP_FALSE
DATA:
    lr_qs TYPE REF TO cl_crm_bol_dquery_service.
* Get current query object
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
IF iv_first_time = abap_true.
    lr_qs->clear_selection_param_values( ).
    lr_qs->delete_empty_selection_params( ).
*   if l_sales_orgs is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '1'
        iv_attr_name = 'SALES_ORG'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = 'O 50000514'.
*   endif.
*   if l_dist_chan is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '2'
        iv_attr_name = 'DISTR_CHAN'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = '01'.
* endif.
Hope this will help..
THanks & Regards,
Amit

How to change the stsndard selection text for a LDB..

Hi All,
    I am using a LDB selection screen. I want to change the selection text of the standard selecetion field.
For ex, for LDB- PNP, i want to change the 'Personnel number' text to 'Employee ID'...
Please let me know how to do this.
Regards
Nanda

Hi Nanda,
Here is the code which is exactly suitable for this req.
TABLES: pernr.
data: i_tab type standard table of RSSELTEXTS with header line.
initialization.
i_tab-name = 'PNPPERNR'.
i_tab-kind = 'S'.
i_tab-text = 'Employee ID'.
append i_tab.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
    program                           = 'ZESO_TEST'
tables
    seltexts                          = i_tab
EXCEPTIONS
PROGRAM_NOT_FOUND                 = 1
PROGRAM_CANNOT_BE_GENERATED       = 2
OTHERS                            = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Eswar

How to correct the birth date in Apple account? How to change the numerals to English for UAE location?

I purchased iPhone 5S and opened new Apple account with preffered language English and location UAE. I was directed to enter my birth date with only Arabic language option. There was no way to change the language or skip the step. I had to enter an arbitrary birth date to go to the next step. How to correct the birth date now and change the numerals to English?

Solution!!
I was finally able to get the installer build to work, even though it takes about ten minutes!! The network and CPU activity is minimal, so I don't know what LV is waiting on during all this time?
For this installation it appears to be related to the directory structure created by the Volume License Manager 2.1 software. There are two sets of users at my company, LabVIEW Professional and Developer Suite, which have different license numbers and installers. The errors were related to source files located in the Products folder of the network distribution. My installation expected the Products folder to be in a different location that it was actually placed by the VLM software. I copied the entire Products folder from _SourceFiles up to the LabVIEW 8.5.1 folder and now it works, although very slowly.
LabVIEW 8.5.1
-->_SourceFiles
    -->Bin
    -->Device Drivers
    -->Licenses
    -->Products   (original location)
    -->Signal Express
-->Dev Suite
-->LV Pro
-->Products    (manual copy)
I hope this information may be of use to NI or other users.
Message Edited by jrjones on 08-12-2008 03:21 PM
Message Edited by jrjones on 08-12-2008 03:23 PM

How to change the email I choose for sending me safety information?

Hej,
yesterday I bought my brand new iPad mini and when I tried to buy an App from App Store it ask me to reply to safety question. Unfortunately I made some mistake on it because even if I wrote the right questions system told me that datas are incorrect. So I tried to send safety answer to the answer I choose for retrive this information, but this address is no longer valid.
So, how can I change this address? Do I need to contact Apple via Phone? On appleid I weren't able to find any option to change it.
Thanks in advance
Fabio

Hi and Welcome to the Community!
Indeed, you cannot set that. Rather, BIS chooses the "best" protocol based on what it "finds" on the server to which you direct it. So, if your server is only serving out POP, then that's what BIS chooses. I thought that BIS would choose IMAP if the same server offered both, but I am not positive about that. Typically, if you want fine control, you must either have different servers to direct BIS towards (one for POP, a different for IMAP) or have the server be able to control specifically what it puts out (e.g., as in GMail, where the end user controls if the server provides POP, IMAP, or both).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to change the number apple has for me

I'm stuck :-(
I'm overseas.
I was in the Netherlands and now I am in Austria - I have an Austrian sim in my phone - yes I can receive texts on it.
I'm upgrading to iOS8
In iCloud it wants me to enter my pin and then the code sent to my phone.
It says it is sending it to my Dutch Number but I need to change this to my Austrian number to receive the SMS.
I have followed the links "don't have access to this phone?"
- but they won't let me enter anything other than a US phone number - and in fact I cannot see my Dutch number in there anywhere either ?!
I cannot for the life of me remember how I entered the Dutch one or maybe I could change it to the Austrian one now!
- more to the point - how will I change this back to my US number when I return?
HELP !

update - maybe helpful....
I'm told to:
Go to My Apple ID.
Select Manage your Apple ID and sign in.
Select Password and Security.
In the Trusted Devices section, select Manage.
To add a number, select Add an SMS-capable phone number.
To remove a number, select Remove next to the verified phone number associated with your Apple ID.
It's all good down to step 3 but in there I do not see a "Trusted Devices" section - it only talks about 2 step verification, security questions and my birthday.

How to change the comma and dot for Pricing

Dear All,
As per the requirement, we need to change the Comma as dot and dot as comma for all the condition type values.
Please let me know where we have to do this setting.
Also explain, what is the impact on FI after this change.
Regards,
Mullairaja

Hello,
I hope you are talking about decimal notation in User defaults. You may choose the options in transaction SU3->Defaults->Decimal Notation.
This is user-specific settings and there will not be any impact on applications.
Thanks,
Venu

How to change the Y-axis scale for 100% stacked column to percentage ?

Similar Messages

Maybe you are looking for