How to change time view?

How can I show only 08:00-20:00 in day/week mode? I just want to see only 08:00-20:00 time frame. Now iCal shows always 00:00-00:00. This isn't possible thing in iCal now?

Hi MS?
Go in under iCal and select preferences.
Under General, change the time settings to:
Day start at: 8.00 and Day end at: 20.00
Then select Show/12 hour/ at the time
That should do it.
But before you close the iCal General window go in under advanced and un-click the checkbox: Turn off alarms when ical is not on.
Otherwise you will not receive alarms when iCal is closed.
Good luck
Camán

Similar Messages

HT4623 HOW TO CHANGE TIME ON MY IPHONE 3GS I HAD UPGRATED IT TO 6.1.3 WORLD CLOCK AND ACTUAL TIMING IS DIFFRENT

how to change time on iphone 3gs
world clock n actual timing is different
ios6.1.3

That's because iTunes 11 requires Snow Leopard or higher.

How to change the view criteria at run time for af:query

Hi,
I've a usecase where I need to change the view criteria of the af:query at run time.
Use case:
=======
1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees under dept 10. If user searches without selecting the check box, the results should show all the employees in all the departments.
2) I need to have a check box always in the query panel. Its mandatory.
The way I implemented:
==============
1) Created a transient variable 'Show Emps Under Dept 10' in the EmployeeVO and also created a bind variable bind_DeptNo.
2) Create a view criteria 'AllEmployees' which has only the transient attribute as the view criteria item and whose value set to 'false' by default.
3) Created another view criteria 'EmpUnderDept' which has 'DepartmentId' as the view criteria item and whose value set to the bind variable 'bind_DeptNo'.
4) Dropped the view criteria 'EmpUnderDept' as the 'af:query' panel in the jspx page.
5) Overridden the queryListener as '#{EmpBean.empSearch}'
6) Has the below code in the empSearch method as below. When user selects the check box, applying the other criteria 'EmpUnderDept' and setting the bind variable to '10'.
public void empSearch(QueryEvent queryEvent) {
// Add event code here...
QueryDescriptor queryDesc = (QueryDescriptor) queryEvent.getDescriptor();
ConjunctionCriterion conCrit = queryDesc.getConjunctionCriterion();
List<Criterion> criterionList = conCrit.getCriterionList();
List criterionValues = new ArrayList();
Object criteriaValue = null;
int criteriaNo = 0;
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesContext facesContext = FacesContext.getCurrentInstance();
for (Criterion criterion : criterionList) {
AttributeDescriptor attrDescriptor = ((AttributeCriterion)criterion).getAttribute();
System.out.println("============== attrDescriptor.getName() =================== " + attrDescriptor.getName());
criteriaValue = ((AttributeCriterion)criterion).getValues().get(0);
if(criteriaNo==0) {
Boolean val = (Boolean) ((AttributeCriterion)criterion).getValues().get(0);
if (val.equals(true)) {
OperationBinding method = (OperationBinding) ADFUtil.findOperation("ExecuteWithParams");
if(method!=null) {
Map params = method.getParamsMap();
//params.put(key, value)
method.getParamsMap().put("bind_DeptId", 10L);
method.execute();
ADFUtil.invokeMethodExpression( "#{bindings.EmpUnderDeptCriteiaQuery.processQuery}", queryEvent);
} else {
//ADFUtil.invokeEL("#{bindings.ExecuteWithParams.execute}");
ADFUtil.invokeMethodExpression( "#{bindings.AllEmployeesCriteriaQuery.processQuery}", queryEvent);
But this approach is not working and its always showing all the employees in all the departments.
Please let me know if there is a way to change the view criteria at run time depending on the values set at run time for one of the view criteria items.
JDev version am using is '11.1.1.5'
Thanks,
Lakshman

Hi Shay,
It worked for me without overriding the executeQuery() method in the ViewImpl.java.
Instead of creating 2 view criteria, I created only one which has both transient variable and the DepartmentId = <bind_DeptId>. With the above code, it worked properly. Now I am using only one view criteria.
Thank you.

How to change default view for folders?

Whenever I create a new folder, the view always defaults to icons with the Sidebar visible. I want all newly created folders to open in list view, and I don't want to see the Sidebar. Can anyone tell me how to change the defaults? Thanks...

I'm not sure how to make it default, but I think you may be able to get rid of the sidebar for a whole session (you probably have to get rid of it again once you've restarted).
Just disable the sidebar by clicking in the little white ellipse/oval thingie in the top right corner of a new finder window. Then when you open new windows, or open folders in that one, they should all come up without sidebars, and in the same format. I hope that works for you, but honestly I don't know why you wouldn't want the handy sidebar

How to change the view of the basic search portlet

Hi,
I want to change the view of the basic search portlet. To be more precise, I just want a text box and a Go button in it. Cananybody advise on how to do this?
Regards,
Priya

Indeed the 'Basic Search Box' item is what you want to use. You can choose what label you want or an icon if desired.
As mentioned in a previous reply, you need to edit the properties of the Page Group where you want to add the item and add the 'Basic Search box' to the list of available items that a user can add to the page group.
Navigator -> Properties (for the desired page group) -> Configure Tab -> Edit link in the 'Content Type and Classification' section -> Item Types section add the 'Basic Search Box'.
Now in a page in that page group, add an item, and from the list of 'Built-In Navigation Item Types' you will see the 'Basic Search Box'.

How to Change the View

View will not reset to "actual size"; suggestions?

When opening a PDF document it is zoomed at 173%, which is "Fit Width". I want them to open at 100% or Actual Size. Every time I open a PDF I have to click on View, then Zoom, then click Actual Size. I have gone to Adobe Acrobat Professional and clicked on Edit, then Preferences, then under Default Layout & Zoom and changed from "automatic" to 100%, hit OK -- but nothing changed, even after a reboot, which is sometimes needed to hold changes. I work with PDFs quite a bit & it's just frustrating to have to keep changing the view. Thanks for any assistance you can provide.

How to change time in LINUX

Dear Experts
Please any one tell how can I change time in LINUX machine through Command???
regards
PAKISTAN

user2108660 wrote:
Dear Experts
Please any one tell how can I change time in LINUX machine through Command???
regards
PAKISTANIt's not Linux forum, it's Oracle forum
Your question is so easiy that could be found from simple google-ing
Here it is - http://www.cyberciti.biz/faq/howto-set-date-time-from-linux-command-prompt/

SCCM 2012 - How to change time, UTC

Hi I wonder how I change SCCM 2012 time ?
When I get a mail about virus/malware -->
Detection time(UTC time): 4/3/2013 8:59:43 AM
The time appear wrong, 2 hours after...
-- Sokoban3 --

I know the time is displayed in UTC and it can't be changed. I know that there are several feedbacks on connect to get that changed.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals
Any movement on this front...I see my Deadline as UTC in the console. Very confusing and just needs to be fixed. Only people that are actually global organizations would have any need for UTC as the main time. We are not, so just an inconvenience.
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

I have the mobile gallery with an album of photos to be shown as a slide show. I cannot find how to Chang the viewing time. I'd like it to be 10 seconds. How do I do it. I have tried changing the general set tins in photo and pictue frame, but that doesn'

How do I set different viewing times for the mobile gallery.
I' like to change it from about 3 seconds to10 seconds.

I hope this is something that will be corrected in the next vision of either theoperrating system, or in the gallery. three seconds is way too short for showing pictures to friend while telling abut them. Even apple's screen savers ware slower between the transitions.
I'll do a search ontne store for an app. Do you think I should search for a different photo display, or for something that allows one to change settings on the current gallery app?
thanks
Phyllis

How to change the Views or Pop-ups?

Hi All,
I have a huge user interface with many views and pop-ups, and want to know what is the best method to make changes to them.
I need to add or change input fields in the views, but some of the fields are not yet available from the RFC models. Therefore, in this case, is it acceptable to use Apply Template (even though some fields are not be available) or should I create/change the ui elements individually or manually change their properties? Would the second option, which is to manually create/change the input fields on the screens, be acceptable practice?
Also, how should I go about re-arranging or re-aligning the buttons, check boxes, etc? I have tried drag-and-drop, but it is very difficult to line things up. Is there an easier way?
Thanks so much for your help.

I have not receive a response.
My question is, if I make changes to my views WITHOUT using Apply Template, will that pose a problem later on when I do the binding against the new fields that will be coming from the RFC model?
Is it necessary to wait until the RFC model has been updated with the new fields before proceeding with the changes to the screens?
The reason I'm asking is because in the interest of time, the client has asked me to complete the screen layouts first. Then the bindings can take place later once changes to the Remote-enabled Function Modules (adaptive RFC) have been completed. What is the common practice in this case?
Please offer your expert advice as this is urgent.
Thanks so much.

How to change default view in web plugin?

Anyone know how to set a default view in the Reader plugin in Firefox and/or IE? I'm getting sick of having to manually show the task bar and then un-toggle touch mode to get my scroll bar back every time I open a PDF. Thanks!

Thanks! I turned off Touch mode there (Edit\Preferences\General --> set
Touch Mode to "Never")
Then I poked around more and fixed the default view in
Edit\Preferences\Internet --> unchecked "Display in read mode by default"

HT201250 How to change Time Machine back up time

Is there a way to change the hourly Time Machine back up time to once or twice a day?

Tidy wrote:
Now I have my original back up on time capsule which time machine can't see and it keeps starting over again to make a new backup - so my time capsule disk shows two separate backups one the original one of 2 days ago named for my computer and a new one almost the same gigabytes (139gb) which it has called Macintosh sparse bundle ????
It's possible the first one is damaged, but that seems unlikely, unless you turned the TC or Mac off while it was trying to do a backup. But even that shouldn't cause TM to start a new one (absent any messages to that effect). And it shouldn't be named "Macintosh" unless you've changed your computer name to that via System Prefs > Sharing.
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate both backups in question, then copy and post all the messages for each one here. (Since the first backup has been a couple of days, the widget may not show the messages for that backup; if not, the pink box shows how to use the Console app to find them.)
With the messages from both backups, we may be able to see what's going on.
I'm thinking that I should just leave time cap ON and see which it backs up to then delete the other one.
Let's see what we can find first.
I assume connecting iMac to time cap via Ethernet cable would not be a problem?
Correct. Doing the first, full backup via Ethernet is recommended.
Also if just turning time machine off is enough to disrupt time capsule backups how about turning the iMac off, which I will have to do once in a while.
Neither should be a problem, unless a backup is in progress and either the TC or Mac is shut down abnormally.

How to change time out settings in Analytic Provider Service...

... or how to disable automatic disconnect between APS and essbase server (using XMLA interface).
First a short summary:
We would like to use a third party product to analyze data (DeltaMaster from Bissantz). This product uses the XMLA interface provided by Analytic Provider Service. Mostly the connection works, I can choose one of our cubes, sometimes a drill down is possible, but sometimes the following error occurs:
"Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: (1042006): Network Error [10061] Unable To Connect To [entwgdw.hres.de:33769]. The client timed out waiting to connect to the Essbase Agent using TCP/IP. Check youer network connections. Also please make sure that Server and Port values are correct [...]"
I have already talked to the Bissantz support concerning this issue and the recommended me to increase the APS time out settings and/or to disable the automatic disconnect between APS and essbase server after every query.
The question is: Is this possible and if yes: How and where can I change these settings???
Kind regards
André

You could look at updating the essbase.properties file in the APS installation directory.
olap.server.netRetryCount=600
olap.server.netConnectRetry=3
olap.server.netDelay=200
olap.server.netSocketTimeOut=200
Update then restart APS
Though this might not be the issue if on windows, it may be down to the amount of ports being used, have a read [here |http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html ] for a possible fix.
Cheers
John
http://john-goodwin.blogspot.com/

How to change Time Zone rules in CPS for Russia

Hi
Coming up to DST change this weekend 30th Oct we found that Russia is not changing their time anymore for the first time ever
Were based in the UK but we have jobs scheduled for Europe/Moscow time which is set at +3 hours after the clocks going back this weekend Europe/Moscow will be +4 hours
But Russia is not set to change their timezone anymore, but CPS will still make the change which I dont want anymore.
Timezones are listed under Environment - Timezone but the only thing you can edit is the description.
How do I go about removing DST from the Europe/Moscow time zone?
we still want to use Europe/Moscow for certain jobs.
Kind Regards
Jonathan

Hello,
Russia is cutting back on the number of timezones these years and also changing their definitions.
The timezones are maintained in the Java JVM you are using. To make sure you have the latest definitions make sure you have patched your JVM with the correct timezone definitions.
Regards Gerben

How to change Time (Zone) that Project On-Line install defaults to

We are using Project Online. and the time displayed eg., Job Queue, is 3 hours behind. ie., it is displaying Pacific time, but we are in the Eastern Time zone. Can we change it? If so how?
Thanks in advance,
\Spiro Theopoulos, Montreal, QC (Canada)

Hello,
There are certain areas in Project Online that will display the time zone incorrectly. All you can do is change the Regional Settings for the PWA site collection but that will not update all times as you have seen. I'm not sure if this is something
that will be resolved in the near future or not. It might be worth you opening a support ticket via the Office 365 tenant so that all the requests can officially be logged / tracked.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

How to change time view?

Similar Messages

Maybe you are looking for