How to change to working with referenced images but keep library on laptop

Hi,
So, my iPhoto library is getting too big - I'd like to be able to have the images stored on an external drive and refer to them from within iPhoto, whilst keeping the iPhoto Library itself on the laptop. I know exactly how to do this from scratch, by unchecking 'copy items to my iPhoto library' in advanced preferences, but I'm trying to figure out how to convert my existing library, which has all the photos stored within it, to one where all the original files are on an external drive and are referenced by iPhoto. This way, I can see the previews when I'm away without the external drive attached.
Thanks!

There is no easy way to do it and I would strongly urge you to reconisder.
In a Referenced Library, iPhoto creates aliases to the location of the actual file. While there is at least one app that will help you replace those aliases with the actual files (convert a Referenced to Managed library) there is no app that will convert those files to aliases that point to the new location of the files. You will need to do each file manually.
More importantly, iPhoto has no tools to manage Referenced files. While on the same volume, aliases will track moved files. However this is not the case where the files are on different volumes. The upshot of this is that should the link to the files be broken then you could find yourself reconnecting each and every alias in your Library, one by one.
Also, I'm not sure about 09 but earlier versions of iPhoto would not open if there were movie files in the Library that were not available at time of launch.
You can move an entire Library to an external disk. There are firewire and usb disks now no bigger than a pack of playing cards and will run from the laptop's power supply.
Regards
TD

Similar Messages

How to move Aperture Application back to computer, but keep Library on External HD?

Many thanks in advance for your attention.
1. As my Aperture Library started out of the gate large, I began by putting both the Aperture Application and all of the Library on an External Hard Drive.
2. How do I move the Aperture Application back to my computer, but leave all the Library (and its photos, contents, etc.) on the External Hard Drive?
3. I tried opening a new Aperture Library on my computer and then attached my External Hard Drive. I tried clicking that I wanted to keep all the data on the Eternal Hard Drive (presumably this would just transfer the Reference files to my computer - but leave the 100s of GB of photos and data on the External Hard Drive). But the Import button remains greyed out. It is like the Aperture Application on my computer sees another Aperture Application and Library on the External Hard Drive. One Library is open (on computer), so it can't access photos in 2nd Library - (External Drive). But if I open up External Drive Library, then I can't import in the direction I want.
4. I don't want to import One Project. I am trying to now have my Aperture App and Reference files on computer, while keeping all my photos, etc. on External drive.
5. One more question as I have read and heard it both ways. Some people say - One Aperture Library for all photos is the best way. That is the point of it. To organize all your photos.
6. Others say - One library is absurd. As it grows and grows, it slows down and gets sluggish. Better to have multiple (smaller) libraries.

Thanks for this link as well.
This person seems to want to illustrate that you can have multiple Libraries, which you can. The first example given is a good one: one Library for professional work (I was paid to make these, and I sell them), and one Library for, as the author states, "snapshots of family and friends". The second example is suspect. That is the author's Library for his Aikido club. This seems set up simply so that he can show a third Library. The Library does no appear to be used much, and is very small. There is no reason such a Library shouldn't be either in his Professional Library (I get paid to take shots of my Aikido club) or in his personal Library (my Aikido friends).
I put both this person and the other person to whose video you linked in the category of helpful people who have knowledge but not much experience. (And let me here acknowledge that I tend to overstate my case: I'm happy to have my experience improved -- but I didn't see anything in either citation that did that.)
A year ago I stated my general rules for creating Libraries. I stick by them today:
My rules-of-thumb are:
• One Library for each photographer or group of functionally identical photographers (a company that shoots weddings, for example) when the author/copyright-holder of the image is important.
• Separate Libraries for "authorless" images of a specific category (I keep a Library of paintings and drawings; who made the photographs is of no interest).
• Separate Libraries for items which need to be handled securely (medical documentation, for example)

When working with aRGB images, what changes must be made when printing?

Working in the Adobe RGB color space requires that all components in the chain (camera, software, monitor, printer) be able to handle aRGB. When printing from Photoshop Elements, what changes (if any) need to be made at printing time?

Thanks Michel.
I knew about the "more options" dialog box and use it regularly to set
ICC profiles for my Canon Pro9500 Mark II printer, ensuring also that
"Photoshop Elements manages colors". I could have asked the question
better perhaps: "When working with aRGB images, how can I set both an
ICC printer profile for a specific paper and ensure that printer uses
the aRGB color space?". As far as I can tell, you can set an aRGB
profile (either in Photoshop or at the level of the printer), but you
can't use both the aRGB profile and an ICC paper profile at the same
time. I am assuming that you can't set an ICC profile for the paper in
Photoshop Elements and at the same time use the printer's aRGB driver.
Is that right?
Craig.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

Have discovered how to split visual and audio tracks. However the cut away only seems to work with still images from iPhoto!

trying to cut away from one video clip to a second one, while keeping the original sound track, works with still images imported from iPhoto, but cant get the video to drag/drop. please help thanks

simonjacobson wrote:
Drag clip over target, green plus sign appears.........clip appears at front of video, no menu option appears,
OK that sounds correct. Just to clarify, when the sign appears, as you release the mouse button (or whatever you are using), no menu pops up but the clip immediately positions itself:
at the front of the target clip, OR
at the very beginning of your project
Not sure where I'm heading here, just trying to get the complete picture.
I di it once, but not again, do i need to double click/right click or something?
No, there is no double-click or right-click involved at all. Just drag and drop, then select from the pop-up menu. You should be able to repeat this with no issues. I've also tested dropping video onto a still picture - the cutaway works on that as well.
Something is definitely not working correctly - strange! Quit iMovie, then try deleting the preference file as I described in my last post. Quitting and relaunching iMovie might even fix it. Also, try restarting your Mac - that sometimes helps.
John

Vault restoration with referenced images - SEEKING HELP

Long story short: I have, had, a library that contained both managed and referenced images. 2 vaults set up for managed images, RAID system set up for referenced images.
Rebuilt library the other day because Aperture was moving kinda slowly. Followed the typical protocol of backing up first then rebuilding and to later back up again. In the middle of rebuilding, Aperture froze (Activity Monitor said Aperture was using only .50% of resources) and hung there for over 8 hours. Force quite wouldn't work. Had to hard restart.
Problems surface with the primary library. Decide to restore from recently backed up vault. Worked for only 13 projects but hung/froze again on the 14th project for another 8 hours.
Freaking out that my redundant back up system completely doesn't work, I put the managed projects back together in a new library by going into "show contents" of the vault and importing projects individually. This took another day of work. Managed projects are working just fine now and are backed up once again.
Referenced projects will not import at all. I can not reconnect them to their referenced images in any reasonable manor. The only way I've figured out how to do this is by hand, placing the referenced master image file into the "show package" content file of the said image. This is a daunting task for the 7 weddings of 700-1000 image each. Even if I do this, there is no guarantee that the project will import with out issue.
Anyone know how to do this? Does anyone know what happened here? Any thoughts would be greatly helpful.
Thanks in advance,
cd
Mac Pro 2x2.66GHz, 4 GB RAM, duel HD displays Mac OS X (10.4.10) MacBook Pro 17" 2.33 GHz 3 GB RAM

Andreas Yankopolus wrote:
Dudley,
I'm experiencing the same problem on my MacBook Pro: Aperture will periodically show all of my reference masters as being disconnected. They're on the laptop's internal HD, which is the only one connected to it. Quitting and restarting Aperture usually reconnects them temporarily.
My main piece of advice is to not install Leopard. It's been nothing but trouble for me, my wife, and a friend that's done so. If there was an easy way to drop back to 10.4.11, I'd do so in a heartbeat.
Hi, Andreas
I think there is something else going on. (would like to know what it is). We've been on Leopard/Aperture combo since day one and running without any hickups on PPC, Intels and Laptops.
Is there anything that seems to trigger this disconnect?
victor

Best way to work with large image sequences

Hello,
Im relatively new to Adobe CS4. I am learning to create detailed animations with another software that produces thousands of still images. (I normally save them as .png, 720 x 480, 29.97 fps) I spent the money to buy CS4 becuase I was told this was what I needed to turn those images into video, add titles, captions, credits, etc. So far, I've been useing PremierPro to import the image sequences and add titles. But when I export the sequences, the quality is crap. I've tried all combinations of exporting formats, but even when I try to go for the greatest quality, my files are 100 MB large, and the quality is still crap (nice smooth lines are jagged, and details are blurry and pixilated, even with the titles I added). Can someone tell me how I should be working with these still image sequences so that I can retain the best quality while keeping the file size large. These videos are just played on local computer systems, not over a network or on DVDs. I dont know if I should be bringing the shorter clip sequences into AfterEffects and somehow exporting those. I just dont know. But nothing is working for me. Help!
Nikki

Hello!,
The output frame size has so far been the same as my rendering size (720 x 480), but I's just trying to get the best quality, if I need to render larger I can. Delivery has so far just been video, no audio, although when I get better at this I will record narrations of the animations and put that in. Playback is intended only for computers. Every once in a while, it is requested in a format that will be played over our network, but I wanted to worry about that later.
The preset I chose for the sequence was the DV-NTSC Standard 32kHz
The project/sequence settings are:
General
     Editing Mode: DV NTSC
     Timebase: 29.97 fps
Video
     Frame size: 720, 480 4:3
     Pixel Aspect Ratio: D1/DV NTSC (0.9091)
     Display Format: 30 fps Non-Drop-Frame Timecode
Audio
     doesnt matter
Video Previews
     Preview File Format: NTSC DV
     Codec: DV NTSC
     Maximum Bit Depth
Hope that was the information you requested.
Nikki

Working with RAW images without lens profile?

Does it make sense to work on RAW images if no lens profile exist for the used specific lens?
I see clear differences between RAW and JPG image in means of distortion.
How did you work with RAW images?

There are many advantages to using RAW, so yes it makes sense to work on RAW images even if no profile exists for the lens.
I see clear differences between RAW and JPG image in means of distortion.
How did you work with RAW images?
You can create your own lens profiles. Or you can manually adjust each image. Or you can set up presets for different focal lengths. There's a lot of ways to go.

Engineering change management working with parameter effectivity

In Engineering change management
i have activated parameter effectivity &
defined parameter profile for DATE,SERNR,Kombi1-Customer(combination of Date & Customer name- Kunnr) in IMG settings
i am able to work with Date & SERNR But when i choose kombi1
i am getting the following error message
"No entries in database for object KUNDE_LO table AEEF"
i checked with table AEEF thier is no field KUNDE_LO
How to customize effectivity type Customer
is there any thing i have missed ....

Hi Srinivas,
KUNDE_LO is a data element , what ever kombi1 is defined i think that does not have any values maintained in the system.
or
Check whether any user exits or BAPI's used bringing the customer specifications.
You can also check the data element existence u might have done that .....
Reward if useful
Thanks,

How to change the default JAD Icon image in JStudio

Dear friends,
I have one dought,how to change the default icon JAD image in jstudio application.Its very important to me.And one find answer please tell .

Dear friends,
I developed one application in jstudio.And need to set an special icon for my application.While i download my application in to mobile. The icon should be displayed in the mobile.To show my application as unique from other applications.But i dont know how to set an icon for my application. If any one find answer please reply as soon as possible.
Thank you

I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

Hello Bethanygrace_m7,
Thank you for contacting Apple Support Communities. You can take a look at this article about transferring content from your old iPhone to a new one:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Here is another thread from the Communities about migrating data from an old iPhone to a new one:
Migrating data from old to new iPhone?: Apple Support Communities
https://discussions.apple.com/thread/2038778
Regards,
Jeff D.

Crash While Working With an Image Sequence

So I am working with an image sequence in my timeline and every time I touch that clip (either to render it or move it) Premiere crashes.
I am working on an iMac with 32 GB of Ram with OS X 10.10.3 installed. I recently upgraded from Premiere Pro CS6 to CC and since
then I am unable to work with it.
Here is the error log I keep getting:
Process:               Adobe Premiere Pro CC 2014 [839]
Path:                  /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier:            com.adobe.AdobePremierePro
Version:               8.2.0 (8.2.0)
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Adobe Premiere Pro CC 2014 [839]
User ID:               501
Date/Time:             2015-04-18 16:36:11.311 -0700
OS Version:            Mac OS X 10.10.3 (14D136)
Report Version:        11
Anonymous UUID:        06821F38-EC27-D4F0-775A-7CB2D2257EE6
Time Awake Since Boot: 3900 seconds
Crashed Thread:        24 Dispatch queue: opencl_runtime
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000008

It seems to happen when I am not using any tools. When I have a photo open for any purpose.
It occurs with no input. I fix it by zooming back to where I was.
I am not working with a tablet. I am not working with a mouse.
I will need to look up these preferences. I did not know they existed.
Thanks.
Duane

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

How to declare and work with select-option in screen painter?

hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neon

Hi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin

Working with grey images

Hey guys, got a new question for you. I'm working with grey images from an old newspaper in the 40's in photoshop, originally the format was working gray - dot gain 20%. My question is since this is a gray image with no cmyk to be found, what would you suggest would be the ideal format so that when these images are sent to the printer they will come out looking good? Thanks in advance guys.
Jason

What I'm doing for JPEGs:
72 ppi at current size
144 ppi at half size
215 ppi at 1/3 size
288 ppi at 1/4 size
and even lower if I can get the images that small, but these are intended for a small brochure so I figure they will be okay at around 1 inch wide per placed image in indesign.

How to change to working with referenced images but keep library on laptop

Similar Messages

Maybe you are looking for