How to change Transport Request Description in SAP

Hi experts,
I want to change Transport request description, please suggest me whether its is possible or not. else i have to delete the same request and re-create as per my requirement.
Thank in advance..
looking forward for expert comments...
With Best Regards,
Bharat B

Hi Bharat ,
You can chnage the description of the transport request if thesame is not moved from Development --> to Quality .
Use T Code SE09/SE01 and select the required transport request no  and Double click on the same .
Then click on Change  Icon and properties Tab . Here you can change the description of the Transport request.
Thanks and regards
Veera

Similar Messages

  • How can i change transport request description

    I need to  change transport request description for one table
    Note:
    Considering this post as Basic and Locking it for futher postings.
    Answer: Double click on the Request and using the change option, change it's Description
    Edited by: Vijay Babu Dudla on Jun 29, 2009 7:02 AM

    Hi,
       I know I am a little to late to the party! But for all those who are going to search for this in the future there is a very good blog...i am posting the link below...
    Basically run the program RDDIT076...
    http://scn.sap.com/community/abap/blog/2015/03/12/program-to-change-transport-request-description-after-release
    Regards,
    Divaker

  • How to change Transport request into local object $temp.?

    Hi experts,
    I would like to know to how to change a Transport request into and local object.
    I have already assigned Infopackage to TR, but its not required. We dont want this infopackage to be transported to prod. So how can i change that as a local object.
    Please put our valuable inputs.
    Thanks in advance.
    Regards,
    Dubbu

    Go To that Infopackage ,
    Extras Menu----Object catalog entry.  There you can change package name.
    or
    In SE09---Under the transport requests you can search for the infopackage name and delete from the TR.
    Regards,
    Srikanth
    Edited by: srikanth on Feb 19, 2009 2:26 PM
    Edited by: srikanth on Feb 19, 2009 2:27 PM

  • How to change transport request to local object again--plz help

    Hi all,
    By mistake I saved my FM in transport request.It is not released yet.I want it to be back in local object.Issue is that,when i deleted subrequest and that object from se09,package is not getting changed because the Function group is SAP standard,and not allowing changes.
    Plz help.....I am in real problem..
    Thanks in advance
    Meena

    Hi,
    Goto SE01,
    enter the TR number
    DISPLAY
    Expand the TR object list
    Place cursor on the object & right click & select DELETE object
    You will get a popup asking the object is locked..do u want to proceed.. say YES
    This will remove the object from the TR..
    Now you can delete the TR if it doesnt hv any other objects. If you delete the TR then object wud authomatically come under local objects.
    else...
    Open the object & goto attributes.. change the class & save.
    Best regards,
    Prashant

  • How to change transport Request of an Object

    Hi all,
    I had assigned a transport request for an object (DTP) in transport organizer. Now i need to put this object in a different transport Request number. Is this possible? If so can someone suggest me how to do this?
    Thanks
    Maddy

    Delete the DTP.
    Add the DTP to the new request - You can do this in SE03 or Transport Connection.
    Or
    Merge Requests using Context Menu on the Request.
    Or
    Open the DTP - Extras ( ? ) _ Object Direct Entry - Click on Change - Assign it to a new request. - You have to delete the DTP/Unlock it from the earlier request.

  • How to change transport request

    hi,
    i have accidentally select the wrong transport request number when create a report at SE38, which i dont want and i would want to create a new request number .
    but i were unable to do so. can any one help me on this? thanks

    If you have assigned the report to a wrong request.
    Go to SE10, open the request, then the task, place the cursor on the report name (the report which you do not wnt in that request) and press the delete button on the task bar. This will delete only the entry of the report name from the request. the remaining objects in the request remain the same.
    Now open SE38, with the new report and press save, this will prompt for a transport request, create a new one and save it
    Please do not open multiple threads for teh same query.
    Regards
    Gopi

  • How can i change the request description?

    how can i change the request description? in BI 7
    Regards
    Kiran

    hi Kiran,
    If u mean transport request; u can change it if u have not released the request.
    go to se10.Double click on ur request. u will get the change icon in that page-> click on that. goto properties tab- there u will be able to change the short description.
    hope it helps.
    Regards,
    Rathy

  • Validation on Transport Request Description

    I want to put some validation on the transport request description.
    Please let me know the procedure.

    When you want to use existing transports to configure your process rather than re-keying in the configuration. However, I cannot imagine why you would want to detail your configuration this way.
    Maybe when you want to provide a level of confusion as to how the system was configured? It's sort of similar to when you put a BC Set on the Config tab. Without a document telling you what the BC Set is doing it kind of makes it hard to see the big picture.

  • How to reverse Transport requests from sand box to development client

    Dear all,
    I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
    Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
    Please educate me how to reverse transport requests from sand box to development.
    your suggestions are highly appreciated
    thank you
    Venu Gopal

    There is no reverse, you have to create a new transport with the original settings.
    Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes.

  • How to track Transport request released

    hi Experts,
    How to track Transport request released from one development system (D01)to another
    development (D02).
    is there any way we get know .
    Amit

    Hi,
           From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
    E070                             Change & Transport System: Header of Requests/Tasks
    E070A                            Change & Transport System: Attributes of a Request
    E070CREATE                       Change & Transport System: Creation Date of Request
    E070DEP                          Change & Transport System: Dependencies of Requests
    E071                             Change & Transport System: Object Entries of Requests/Tasks
    E071C                            Change & Transport System: Client-Specific Lock Flag
    E071E                            Lang. Transport: Positive List for Generic Object Selection
    E071K                            Change & Transport System: Key Entries of Requests/Tasks
    E071KC                           Change & Transport System: Key Entries of Requests/Tasks
    E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
    E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
    E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
    E07T                             Change & Transport System: Short Texts for Requests/Tasks

  • How to change the default operators in sap web ui Search screen?

    How to change the default operators in sap web ui Search screen?
    For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
    I need only "equals" operator. How do i remove the rest of the operators?

    There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
    Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
    Regards,
    Harshit

  • How to create transport request in object transport

    How to create transport request in object transport from server to server
    thanks in advance
    arya

    hi,
    when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
    put mail to basis people to transport ,thy will transport using STMS transaction.

  • How to create transport request for standard text created using SO10.

    Hi,
    How to create transport request for standard text created using SO10?
    Regards
    Ramakrishna L

    Hi,
    For the Standard text created in SO10,
    please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
    Double click on ADRS or ST or what ever your type of text->
    Enter your standard text name
    Click on transport button->SHIFT+f6-> It will ask you for a transport request.
    Best regards,
    Siva

  • How delete the Transport request in Development system

    Hi Guys,
    I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
    I need to delete the Transport request, could you please suggest how to delete the Transport request.
    Please provide the steps to delete the Transport request.
    Thanks,
    Gourisankar.

    hi Gaurishanker
    check this thread
    How to delete transport request if child request was released
    hope it helps you.
    thanks
    Sachin

  • How to create transport request of Dynamic Selection view.

    Dear Freinds,
    I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request saved it locally now i want to create a transport request for the dynamic view . Could any please let me know how to create transport request for the Dynamic selection View which has been created or could any please let me know where this dynamic selection gets stored?
    regards
    divya

    Hi Kalyan,
                    In se80> editobjects > selection view .........i have created the selection view . Now i have went into se80 and i dont find the one you have told me . could you please let me know little bit clear where i have to see .
    regards
    divya.

Maybe you are looking for

  • Attachments garbled in Mail

    I have a friend who recently purchased a 13" Mac Book. The Store/Geniuses got it all setup for her. She also has an existing iMac at home. The issue she has now is that on the Mac Book, when she gets emails that have attachments, they come across gar

  • Tips on making my iMac 7.1 run faster?

    I've tried cleaning (with Clean My Mac), moving files to external hard drive, not opening applictions on launch, etc. Still painfully slow... If I re-start it works faster for a while, then seriously slows down if I have more than 3 or 4 applications

  • Fetch Image from Portal in ABAP

    Hello, I have an image in a HTML published in the portal (with broadcaster). Now I want to use this image in an ABAP program. I can't call the web address directly because my program can't handle the Portal authentication. So I have two questions: -

  • Setting characterset with NLS_LANG ???????

    Hi guys, I would like to know hoe I can change the characterset by using the alter session statement?? I want to change the characterset. In the Oracle-documentation there is something like: % setenv NLS_LANG FRENCH_FRANCE.WE8DEC But how can I make t

  • PSE9 uninstall issues in order to reinstall

    Long story, but I need to uninstall PSE 9 and then reinstall.  I'm on Windows 7, 64 bit.  I've run the uninstall program through the PC's control panel.  Didn't work.  Also tried via CCleaner and Advanced Uninstaller Pro 11.  Still didn't work.  Trie