How to change Unit for Breakdown Duration in Maintenance order.

Hello,
In cuni, somebody created Unit "TST" by mistake, system can not convert it to "second" for calculation automaticlly.
"TST" make no sence. So if maintain "TST" as Unit for Breakdown Duration in a maintenance order, dump will happen. However there is a maintenance order maintained Unit for Breakdown Duration as "TST" saved by mistake, Dump will happen when I try to access to this order by IW32 to change the Unit for Breakdown Duration. Is there any way to change the Unit for Breakdown Duration"TST" to "H" so that I can access to this order by IW32.
Thank you.

Hi,
You could temporarly adjust the CUNI definition for TST so that it can be converted to seconds. Adjust the notifications to set a valid unit of measure.
The alternative would be to update the field MAUEH in table QMIH with a valid breakdown unit of measure.
-Paul

Similar Messages

  • How to change the clip's duration under imovie 10.0.3?

    How to change the clip's duration under imovie 10.0.3?

    This is a new feature introduced in 10.0.3 which works fine for me.  The old way was to select Modify - Fast Forward.  You can only select certain speed ratios but a slider should appear near the top of the clip which allows finer speed adjustment.  have you tried this?
    Geoff.

  • How to change workflow for expired qualification in HR Module

    Hi,
    My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
    I have serached sap help but i am not understand please below mention URL for SAP help
    Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
    Please explain step by step how to trigrred workflow for expired qualification?
    Please this problem is high and try to solve it.
    Thx!
    Sachin

    Hi,
    Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
    But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
    Hope I am clear and this helps and if you need more details, reply.
    venu

  • How to change tablespace for a table in 10g?

    Does anyone know how to change tablespace for a table (like changing tablespace for an index [alter index ... rebuild tablespace ... ])? Many thanks in advance.

    alter table tablename move tablespace newtsname;
    You need to rebuild the indexes after the move.

  • How to change password for itunes

    HELP PLEASE!
    DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

    Follow the instructions here.
    Apple ID: Changing your password

  • How to change password for BtOpenZone?

    Hi,
    Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
    http://www.btinternet.com/new/content/mybti
    Last time I have to ring BT to change the password, but I want to do via some control panel.
    Thanks
    Kam 
    Solved!
    Go to Solution.

    If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
    if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

  • How to change password for sidadm user on HP-UX

    Hello
    How to change password for <sidadm> user on HP-UX

    Hello Jan,
           1.      Log on to the operating system with the <sid>adm user.
           2.      Open a shell.
           3.      Enter the command passwd.
           4.      Enter the old and new passwords
    Rohit

  • How to change password for apple user id

    how to change password for apple user id

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for parental controls

    how to change password for parental control on macbook pro

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for  XELSYSADM user in OIM?

    Hello Gurus and Experts!
    How to change password for XELSYSADM user in OIM?
    Your help is appreciated.

    Follow the undermentioned steps to change the password:
    1) Change the password from oim Design Client as usual.
    2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
    3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
    <Scheduler>
    <XLUserName>xelsysadm</XLUserName>
    <XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
    </Scheduler>
    4) Restart server.
    Now login with the new password.

  • How to find Transaction for a Known Table maintenance View

    Hello Friends,
    May I know how to find transaction for a known table maintenance View.
    Thanks,
    Best Regards,
    Sudhanshu Garg

    Goto SE16 Transaction and enter TSTCP Table
    Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
    enter table name in bold.
    Thanks
    Seshu

  • How to change position for items in shopping cart

    Hello,
    I am creating shopping cart using flat file. But i am not able to change the position for items i.e. both items contain position as 0000000001.
    Following are the item details of shopping cart which is created through portal. (from tcode BBP_PD)
    Items:
    Pos Type Quantity Unit Ordered_Prod Description Gross price
    0000000001 1 EA keyboard 100,00
    0000000002 1 EA CPU 1.000,00
    Following are the item details of shopping cart which is created using flat file & BAPI BBP_PD_SC_CREATE.(from tcode BBP_PD)
    Items:
    Pos Type Quantity Unit Ordered_Prod Description Gross price
    0000000001 1 EA MONITOR 1,00
    0000000001 1 EA MONITOR 1,00
    Position is not getting changed for item 2 & only first record is getting uploaded 2 times. My code is creating Shopping cart number .
    Please tell me how to change position of each item.
    Thanks & regards,
    Edited by: Ketkee Bhale on Sep 14, 2011 3:58 PM

    Moderator message - Cross post locked
    Rob

  • Basis in computing for breakdown duration

    Hi All,
    Good afternoon. I would just like to ask as to what is the basis in computing the breakdown duration generated upon completing a breakdown report? Is it standard that it is computed based on 24hrs a day? If it is, is there a way to change it from 24 hrs to 8 hrs per day? Hope you could help me all. Thank you.
    Thanks and regards,
    Happy

    Hello,
    The system determines the MTTR and MTBR key figures on the basis of the individual history of a technical object. The MTTR key figure represents the arithmetic average of the downtimes for the object concerned. The MTBR key figure, however, represents the times in which the reference object was fully operational.
    To generate these key figures, this system draws on all the malfunction reports with breakdowns that were created since the start-up date of the reference object. For technical objects, for which the start-up date is not specified in the master record, the system uses the end date of the first malfunction report where the breakdown indicator was set as the start date for consideration. In this case, the first malfunction report is not taken into account in further calculations.
    In addition, the system only evaluates those malfunction reports for which the start and the end of the breakdown are specified. The evaluation using the start time and the length of the breakdown is not supported.
    The system uses the amount of breakdowns reported for a technical object to first determine the effective breakdowns. In doing this, it merges two reported breakdowns that overlap in time. The reference time for assigning the MTTR and MTBR key figures to a statistics period is the start of the effective breakdown. In the case of longer breakdowns, this can make it impossible to calculate the key figures for the subsequent periods.
    MTTR = Sum of effective downtimes / Total of effective breakdowns
    MTTR = Sum of effective time between / Total of effective breakdowns
    Reagrds,
    Rakesh

  • PS CC: 3D Extrusion Depth Properties setting, how to change units?

    Hi all,
    I've been trying to follow an online tutorial but came up against a brick wall during a step. The tutorial wants me to change the Extrusion Depth for a 3D object in the Properties panel, presumably in pixels (somewhere around 350) but I have inches as a unit in my panel. See the screenshot.
    My question is, How do I change that? I've looked everywhere online but all anyone refers to is the Extrusion Depth setting in pixels as well. What am I missing? Using PS CC 14.2.

    You might have change your ruler units to Pixels before doing the extrusion
    That's a good question though, since there doesn't seem to be a way to change the units for the Extrusion Depth after doing the extrusion.

  • How to change path for Ev4Excel.xla

    Dear All,
    I'm trying to execute predefined BPF - custom menu (ProcessFunctions.xls). Whenever if click e.g. on Back, forward, open a file following similar message is being prompted:
    Macro 'E:\Program Files\BPC\Ev4Excel.xla'!'EvMacroCall "OPENFILE","REPORTS\WIZARD\HotAnalysis\A01 Account Trend.xls","","","","","" can not be executed. Macro may not stated in this workbook or all macros can be deactivated.
    Ev4Excel.xla is resided under path E\PC_MS.
    How can I change path for macro call?
    Or any other idea?
    Regards,
    Ender

    i don't understand why do you have to change the path for Ev4Excel.xla?
    Basically this the addin of BPC into excel. I mean it is the BPC excel client.
    You are choosing the path when you are performing the installation of SAP BPC.
    So Idon't understand why do you want to change the path?
    If you want to do this you have to reinstall the BPC client and you have to choose the path wanted.
    You error is not related to the path it is more related to rights.
    I think you have to provide more details about the steps done and in what condition you observer this error.
    Regards
    Sorin Radulescu

Maybe you are looking for

  • Problem with restore in Backup.app

    I just bought a new external hard disk and did a full back up using Backup.app. Then I needed to restore my iPhoto libary and here's what I got. Restore failed. Here's the log. Begin restore at 2007-03-01 01:04:33 +0900 Created alias at /Users/ronbel

  • XSLT - html table problem

    Hi, I'm having a real problem with trying to get my xslt stylesheet to produce a html table. I want the table to look something like the following: |radio-button description | radio-button description | |radio-button description | radio-button descri

  • Material code, decription and Qty. in GL LINE ITEM DISPLAY FAGLL03

    I need the above fields in fagll03 and fbl3n.  i have tried in Special fields configuration, but i am unable to get the above fields

  • Finding serial number in Office X

    Is there a way to get my serial number from Office X though one of the programs?

  • Safari 3.2.1 and 10.5.6 slow loading/incomplete pages

    Safari was working perfectly inder 10.5.5, but since upgrading to 10.5.6 it is almost unusable. Having huge problems loading large graphics intense pages (such as newspapers, well almost anything...). Firefox is also having exactly the same problems.