How to change user lock time

Hi all:
    We are running ESS/MSS.
    When user use tasks like maintenance personal data, family data. the infotype data is locked, then user exit the ESS abnormally. Then the infotype data is locked.
    My question is how long this infotype data will be released and can we change the time of this lock data ?

Hi
You can run the date command
/usr/bin/date mmddHHMMyy
example
date 0906154506 (sep 06 15:45 year 06)
Rgds
HGN

Similar Messages

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.h

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?

Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly

How to change user account's Short Name

Hopefully this is a fairly simple question.
When I installed OX 10.3 I mispelled my short name, and now I'm can't find how to change it.
Reffering specifically to: System Preference>Accounts>Short Name
It's not super important, but would be handier to have it displaying correct for networking.
If anyone can let me know how to change the short name, and any issues that may result from changing it, it would be great.
Thanks for any input

Hi baobhanjex!
Here is a direct link that usually works, to the utility ChangeShortName by Dan Frakes.
Read all of the instructions carefully, and proceed cautiously, as an improper change can result in unwanted results.
Such as;
Return to Default Desktop, Apparent "Loss" of Home Directory
Mac OS X 10.3 Help: My home folder and desktop are different than before
Also, here is a KB Article on How to change user short name or home directory name.
ali b

How to change password on time capsule

How to change password on time capsule?

The Time Capsule has two passwords.....a device password and a wireless network password.
Which password are you referring to here?
In order to provide detailed step by step instructions for how to change the password, we will need for you to also post back to let us know what type of operating system....Lion, Snow Leopard, Leopard, etc, that you are using on your Mac.

When downloading an update from app store, password is requested from a different user. How to change user?

when downloading an update from app store, password is requested from a different user. How to change user?

Unfortunately there's no way around this. you will need that password to update the apps. If he won't give it to you, then i'm not sure what to say.
You should have kept the account with the Apps you bought yourself.
Otherwise, as I said, delete the Apps, and buy them again.
Sorry.

How to Change date and time on my printer

I want to know how to change the date and time on my printer.

annazmussaqib,
OK, now enter the following command in the administrative user’s Terminal window:
sudo date -n 122921502013
When it asks you for a password, enter your administrative user’s password; it will not show the password as you type it.
After you enter that command, enter this command again:
date
It should show a date and time that is close enough to the actual date and time that you should be able to go into the Date & Time pane of System Preferences without it hanging.

How to change user authentication program in windows 8.1

hello everyone,
i have developed a user authentication program through mouse gesture dynamics.
My program identifies user by its mouse gesture.
now , i want to use this authentication program when windows boots, and users would be authenticated by my program
(instead of windows default password authentication.)
can you please tell me how should i do this. how to use my program, where to place this in OS code. ?
thank you
ravi

Friz_ wrote:
I'm changing some stuff in the way of usernames and pictures right now, but I just can't figure out how to change my display name. I know I can't change my full name in skype, but I know I've changed my display name a few times before. Most of the threads I found on this were a few years old.
https://support.skype.com/en/faq/FA110/can-i-change-my-skype-name-or-display-name-in-skype-for-windo...

How to measure PLL lock time using LabView?

Hi.
I have to measure PLL, especially PLL lock time, using LabView.
How can I do it?
Is there is some dedicated LabView Toolkit that can do PLL lock time measurement?
Thanks :-)

Hi Igor,
you want to measure the time it takes the PLL to lock in to a change in the source frequency?
So you need to measure the frequency and you need to know the state of the PLL. Then you can calculate the time the PLL needs to work.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to change date and time format

Hi experts,
Can i know how to change the date and time format?
I want the date format to be dd-mmm-yyyy and time format to be hh:mm:ss
These date and time is in my sapscript form.
I make use of PERFORM function in sapscript.
This is the code in my print program.
FORM get_actlog_QA TABLES in_tab STRUCTURE itcsy
                       out_tab STRUCTURE itcsy.
   DATA: object TYPE string, "
        qaname LIKE JCDS-USNAM, "NAME for engineering process, QA Manager
        qadate LIKE JCDS-UDATE, "DATE changed in engineering process, QA Manager
        qatime LIKE JCDS-UTIME. "TIME changed in engineering process, QA Manager
DATA: lt_jcds type standard table of jcds,
      wa_jcds like line of lt_jcds,
      new_date(10) type c.
READ TABLE in_tab INDEX 1.
MOVE in_tab-value TO object.
select * into CORRESPONDING FIELDS OF TABLE lt_jcds
from jcds WHERE objnr = object
    AND ( stat = 'E0005' )
    AND inact = ''.
Loop at lt_jcds into wa_jcds.
      qaname = wa_jcds-USNAM.
      qadate = wa_jcds-UDATE.
      qatime = wa_jcds-UTIME.
   READ TABLE out_tab INDEX 1.
   MOVE qaname TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 2.
   MOVE qadate TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 3.
   MOVE qatime TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
endloop.
clear wa_jcds.
ENDFORM.
This is my PERFORM in sapscript.
/:           DEFINE &V_QANAME& = ''.
/:           DEFINE &V_QADATE& = ''.
/:           DEFINE &V_QATIME& = ''.
/:           PERFORM GET_ACTLOG_QA IN PROGRAM ZFIR002
/:           USING &VIQMEL-OBJNR&
/:           CHANGING &V_QANAME&
/:           CHANGING &V_QADATE&
/:           CHANGING &V_QATIME&
/:           ENDPERFORM.
Sapscript
Prepared by : &V_QANAME& ,, &V_QADATE& ,, &V_QATIME&
The output now is
Prepared by: Name   20080312 115536
I want to change the date format to 12-MAR-2008
and the time format to 11:55:36
Can anyone please suggest on how to solve this?
Thank you.

Hi,
Before assigning the QADATE value you can write the logic to display 20080312   as 12-MAR-2008 taking the offset values .
Like
qadate = wa_jcds-UDATE.
qatime = wa_jcds-UTIME.
lw_year    = qadate(4).
lw_month = qadate+4(2).
lw_date    = qadate+6(2).
case lw_month.
when 1.
when 2.
        concatenate lw_date '-FEB-' lw_year into qadate.
when 3.
      concatenate lw_date '-MAR-' lw_year into qadate.
endcase.
READ TABLE out_tab INDEX 2.
MOVE qadate TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
And you can also change the timeformat also .
then assign that value to qatime .Then
READ TABLE out_tab INDEX 3.
MOVE qatime TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
I think this helps you.
Regards,
Rajitha.

How to change user group of a query (sq01)

Hi,
I'm working with SAP Queries (SQ01) and I don't know how can I change the user group assignation of a query. We did only one user group for all users and queries and know in order to arrange it a bit we've created three user groups.
We know how to assign users to new user groups but for each query of the old group we neet to move it to one of the new user groups, how could we do this?
thanks in advance

Hi
pls go through these links
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

How to change at run-time the type of a step?

Hi,
How topic title, i need to know how change at run-time the type of a step. I have, i my sub-sequence, a step whose type must change at run-time based upon the occurrence of a condition. How can do it?
Thanks.

I need to do this: At verify of a condition, one specific step at the end of sequence must change from statement to numeric limit test and viceversa.
However, is right to no writing self-modifyinf sequence unless handle rece condition on step that i want change at run-time.
Moreover i ask myself: If for change the type of a step i need first delete the substep and later create a new one relative to the step that I want, then it is better and make more sense to create dynamically the step that i would like to have depending on the condition that occurs, right?
Thanks

How to set Passcode lock time in iOS 7.02?

In upgrading my Sprint, iPhone 5s from iOS 7.0 to 7.0.2, when go to Settings/General/Passcode-Fingerprint/Require Passcode, it is now set on "Immediately", when, in 7.0, I had it set for 15 minutes.
When I touch the word "Immediately", the screen shows the word "Immediately", followed by a checkmark. Below the word "Immediately", is a text line stating "Shorter times are more secure." However, when I touch the word "Immediately", the drop down menu that previously appeared under Version 7.0, which provided a choice of Passcode lock times, no longer appears, so I cannot change the time settings for the Passcode lock function.
Is the choice of time settings willfully no longer available, or is this a bug? If a bug, is there a workaround?
Thank you!!

I found an answer, as I had the same issue. And of course, like many things Apple, it's fairly simple.
The issue arises when you have Touch ID enabled. Once you disable Touch ID, you will then have choices of longer periods before a passcode is required. Of course then you don't have Touch ID, but mine rarely works anyway. My skin is too dry and it fails constantly.
There is a good explanation here: http://danstillman.com/2013/09/30/touch-id-and-require-passcode-immediately

How to change user lock time

Similar Messages

Maybe you are looking for