How to change username and password in application connection?

Hi all!
when i create a application connection(10gAS), i must enter ias_admin and password, and EJB connection i must enter one user. but i don't know which user.
can you tell me user and password of that user?
and if i want change username and password then how must i do ?
thanks!

you may change the userID/ passwd from menu or create conn segment for each of the userID/ passwd combination .

Similar Messages

  • How to change username and password

    How can you change username and password for icloud under settings on iPhone?

    Scroll to bottom and tap the big red Delete Account button, then sign back in with the correct username and password.

  • How to change username and password for already running mappings

    Hi Gurus,
    We have created so many mappings(more than 200) in owb 11g and deployed them into production and all are running without any issues.
    Now we are in big problem and the reason is our internal team is asking us to use the new user and password.
    Please let me know what are the best possible ways to change and in which places we need to make changes.
    Thanks in advance... Please help.

    Hi,
    Here are the steps you need to foloow:
    1)Unregister the location that is currently associated with the module that has the mappings
    2)Edit the location information in the designcenter and change it to reflect the new values
    3)Register the location again with the control center and redeploy the maps
    Regards,
    Pnreddy

  • I am the founder of a non-profit organization, a donor had just given us her used iBook G4.  What do I need to do to wipe out her "stuff", change username and password, start all over new.  We will use this iBook in our learning center in Saigon, Vietnam

    To good citizens of the MAC world,
    I am the founder of a non-profit organization, we are caring for 6,200 orphans and street kids in Vietnam.  A donor had just donated her used iBook G4 for us to use in one of our several "learning centers" in Vietnam.  Folks sometimes donating PC but this is the first time we ever received a MAC.. :-)  I would like to know how to start this iBook all over new: change username and password.  I am looking so forward to bring it to Saigon in a few days and let our children experience MAC ... I am a 2 years MAC users and I have no intention to return to the Dark side.  Please help. I have the original OS disk.  Thank you so much.

    There should be no need to zero the hard drive.
    Using the Restore discs that came with the iBook when it was new, restore the system software using the appropriate instructions which you can find through a link contained in this Apple Knowledge Base article:
    http://support.apple.com/kb/HT1561?viewlocale=en_US
    Good luck with it.

  • Change username and password for PGW2200 ..... ????????....................

    Dear how i can change username and password for PGW2200?
    can give the procedures?
    thanks,

    it is ok ....
    thank you....
    i have now this issue:
    i need to add new E1 to be in the same trunk for previous E1 which is for Abdali. new E1 will not have signal it depeneds at old one timeslot.
    i used this for new E1:
    prov-add:nailedtrnk:name="1033",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="33",dsttimeslot="33",spansize=31
    for old one this:
    prov-add:nailedtrnk:name="1002",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="2",dsttimeslot="2",spansize=30
    ============================
    at AS5400 i used to add new E1:
    controller E1 7/2
    framing NO-CRC4
    pri-group timeslots 1-31 nfas_d primary nfas_int 1 nfas_group 0
    Is this true or there are other commands i should use?
    OLD E1 is configured as:
    controller E1 7/0
    framing NO-CRC4
    channel-group 0 timeslots 1
    pri-group timeslots 2-31 nfas_d primary nfas_int 0 nfas_group 0
    description Connection to Abdali
    interface Serial7/0:0
    no ip address
    encapsulation ss7
    channel-id 0
    interface Serial7/0:15
    no ip address
    encapsulation hdlc
    isdn switch-type primary-ni2c
    isdn incoming-voice modem
    isdn map address . plan isdn type network
    isdn rlm-group 0
    no isdn send-status-enquiry
    isdn negotiate-bchan resend-setup
    isdn bchan-number-order ascending
    no cdp enable
    any help please for correct commands i shall use? please see attached file for details.

  • How to pass username and password with the portal url

    i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.

    This is not straightforward; but it is doable.
    First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
    And if you are in AS Rel 2, then the most important document for you would probably be the following:
    [Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
    You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
    hope that helps!
    AMN

  • I am unable to change username and password for wifi network

    unable to change username and password for wifi network

    Thanks, this solved my problem. Network kept demanding username; I guess it's different from the computer ID I use. Whatever, it wasn't easy to find the network listed, but by trial and error, I found it, highlighted it, and pressed delete key. Now the network only asks for password, which I knew, and I'm on. Great advice. But why computer was configured to do that in the first place is why I prefer PC to my wife's inscrutable macbook pro.

  • How to change country and keeping all application upgraded ? thx

    how to change country and keeping all application upgraded ? thx

    you may change the userID/ passwd from menu or create conn segment for each of the userID/ passwd combination .

  • JMS Adapter (for DI) does not allow passing username and password to JMS connection

    Post Author: PLed76
    CA Forum: Data Integration
    JMS Adapter (for DI) does not allow passing username and password to JMS connection. It has those fields only for MSMQ. Our Production environment does not allow us to connect to JMS (we use Tibco EMS) anonymously, so it prevents us from use of Data Integrator. Is there any way to pass those params, or obtain the correct version of JMS Adapter, or obtain source codes of the JMS Adapter so we can correct them ourselves (we can send you the corrected sources back) ? Thanks in advance for any help. (PL)ed76 Renaissance Capital

    Bump - Were having the same issue.
    Has anyone found a way to connect to Tibco with a user/pwd?
    Version 14.0.297.

  • How to set username and password before redirecting to a RESTful webservice

    I am a .Net developer who has developed a webservice used by my ColdFusion colleagues. They are using ColdFusion 9 but I'm not sure if they have incorporated any of the newer features of ColdFusion in their apps. Here is a snippet of how they have been invoking the webmethods:
    <cfscript>
                         ws = CreateObject("webservice", "#qTrim.webServiceName#");
                         ws.setUsername("#qTrim.trimAcct#");
                         ws.setPassword("#qTrim.trimpwd#");
                         wsString=ws.UploadFileCF("#qTrim.webserviceurl#","#objBinaryData#", "#qFiles.Filename#", "Document", "#MetaData#");
                </cfscript>
    As I understand things, the .setUsername and .setPassword correspond to the Windows credentials the CF Admin set when the URL of the .Net webservice was "registered" and given its "name" (for the CreateObject statement above). I have 4 webmethods that are all invoked in this manner and this SOAP protocol works adequately for us. Please note that this ColdFusion web app authenticates anonymous remote internet users by prompting for a username and password and compares them to an application database (i.e. Microsoft calls this "forms authentication"). Because only a few Windows domain accounts are authorized to call this .Net webservice, the above code always uses the same username/password constants and it all works.
    My question involves the newest webmethod added to the .Net webservice. It requires that callers must invoke it as a RESTful service which means it must be invoked by its URL. Here is a snippet of C# code that invokes it from an ASP.NET webclient:
                string r = txtRecordNumber.Text;
                string baseurl = "http://localhost/sdkTrimFileServiceASMX/FileService.asmx/DownloadFileCF?";
                StringBuilder url = new StringBuilder(baseurl);
                url.Append("trimURL="); url.Append(txtFakeURLParm.Text);
                url.Append("&");
                url.Append("TrimRecordNumber="); url.Append(txtRecordNumber.Text);
                Response.Redirect(url.ToString());
    I assume a ColdFusion script could easily build a full URL as above with appended querystring parameters and redirect. Is there some way for the CF code redirecting to a RESTful webservice (by way of its URL) to set the Username and Password to this Windows account mentioned above? When the DownloadFileCF webmethod is hit it must be with the credentials of this special Windows domain account. Can that be set by ColdFusion someway to mimic the result of the SOAP technique (the first snippet above).
    I hope my question is clear and someone can help me make suggestions to my ColdFusion colleagues. Thanks.

    Can you clarify what you mean by "establish a different Windows identity"?  Usually passing identity to a web site or service means adding something to the request's HTTP headers.  This could be a cookie in the case of .NET forms authentication or the "Authorization" header in the case of basic authentication.
    The SOAP web service invocation code you posted does use basic authentication, according to the CF docs "ColdFusion inserts the user name/password string in the authorization request header as a base64 binary encoded string, with a colon separating the user name and password. This method of passing the user name/password is compatible with the HTTP basic authentication mechanism used by web servers."
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec13a13 -7fe0.html
    If you need to mimic the SOAP techinque you should have basic authentication enabled for your REST service endpoints.
    If your authentication method is different then CF developers will need to add the appropriate HTTP headers to their service calls.  Note that calling a REST service from CF would probably be accomplished using the CFHTTP tag if the service is designed to be consumed by the CF server.

  • How-to access username and password protected Java EE Web services from ADF

    The title of this post is exactly the same as this article by Frank Nimphius:
    http://www.oracle.com/technology/products/jdev/howtos/1013/protectedws/access_protected_web_services_from_adf.htm
    The article addresses the problem of securing web services using usernames and passwords, when those web services are accessed through a proxy or a data control. In the examples, the user names and passwords are specified, whether in the code or the definition of data controls. (SKING/SKING).
    In a very common scenario, users login to reach a page, for example, A.jspx, which contains a button that calls a web service, for example displayDate. Suppose that user has logged in by username/pass of (AHUNOLD/AHUNOLD) and AHUNOLD has access to the service and the page. Is there any way to pass the logged in user name and password to the webservice ? Of course we can hard-code the username in the data control definition or proxy code, but this is just one of the thousands of users who have access to the service and the authentication is not dynamic this way.
    Hope my question is clear. Wishing you all a great Christmas.
    Farbod

    Hi Frank, and happy new year.
    Are you implying that it couldn't be done declaratively? What is your suggestion for this problem? You know the problem... As I described:
    - I need to secure my web services, so when exposed, no one from inside network or the internet, can access the web service without proper permission
    - The web services are shown as web controls on jspx pages. The user has logged in before reaching the page. It is irrelevant to ask him to enter user name and password again.
    - I have user names, passwords and roles in Oracle Internet Directory (Identity Management). It provides some APIs and I can retrieve the usernames and attempt logging in programmically. But how can I get username and password from the session in ADF application?
    I guess using SAML or certificate could be the solution, but I have a problem with SAML, described here:
    Re: Webservices Security, SAML, and Identity Management (OID)
    Best Regards,
    Farbod

  • Discover Installed: How to Setup username and password

    I Installed Discover 10.1.2 and BI. When I login with
    http://localhost:18101/
    It is asking username and password.
    1) How to setup the users.
    2) Any Sample schemas.
    (enterprise-manager requires a username and password.)
    Message was edited by:
    ksridhar69

    I got it.
    Enterprise Manager Application Server Control
    username:ias_admin
    password: specified during install

  • Changing usernames and passwords

    This is about Adobe Digital Editions. I have multiple accounts with different usernames and passwords. I don't remember any of them. I contacted Adobe and they reset my username and password. Now I have one. However, I don't know how to change the usernames or passwords on my computers at home and at work so they have the correct usernames and passwords. Right now, I can't access anything I saved under ADE. Any advice?

    Moved to Adobe Digital Editions

  • How to pass username and password while invoking a web service through wsdl

    Hello All,
    i am calling a web service through wsdl, but it is giving error 401. i want to know how to pass userid and password when i am invoking webservice?
    i am using NetBeans 6.1.
    i did following thing:
    First i created one web application, then i right clicked on project new->web service client, and gave the url for my wsdl.
    after that i create one main class and try to call my required operation by that wsdl.
    Thanks in advance

    Thanks dumchikov, i tried the same thing what ever you told but there is no option for security.
    when i right clicked on web service reference its open 1 window which have 2 tab one is quality of service and second is wsdl customization, then i clicked on wsdl customization. which contain Global Customization, Port Types, Port Type Operations, Port Type Faults, Binding, Binding Operations, Services, Ports and External Binding Files. it don't have security option.

  • VC Change username and password for web services

    Hi everybody
    I need to change the username and password into the portal of some web services that   have already been created portal is consuming these web services  a XI
    Thansk
    Ivan

    it is ok ....
    thank you....
    i have now this issue:
    i need to add new E1 to be in the same trunk for previous E1 which is for Abdali. new E1 will not have signal it depeneds at old one timeslot.
    i used this for new E1:
    prov-add:nailedtrnk:name="1033",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="33",dsttimeslot="33",spansize=31
    for old one this:
    prov-add:nailedtrnk:name="1002",srcsvc="ss7p-jtc-abdali",dstsvc="naspath1-abdali",srcspan="ffff",dstspan="0",srctimeslot="2",dsttimeslot="2",spansize=30
    ============================
    at AS5400 i used to add new E1:
    controller E1 7/2
    framing NO-CRC4
    pri-group timeslots 1-31 nfas_d primary nfas_int 1 nfas_group 0
    Is this true or there are other commands i should use?
    OLD E1 is configured as:
    controller E1 7/0
    framing NO-CRC4
    channel-group 0 timeslots 1
    pri-group timeslots 2-31 nfas_d primary nfas_int 0 nfas_group 0
    description Connection to Abdali
    interface Serial7/0:0
    no ip address
    encapsulation ss7
    channel-id 0
    interface Serial7/0:15
    no ip address
    encapsulation hdlc
    isdn switch-type primary-ni2c
    isdn incoming-voice modem
    isdn map address . plan isdn type network
    isdn rlm-group 0
    no isdn send-status-enquiry
    isdn negotiate-bchan resend-setup
    isdn bchan-number-order ascending
    no cdp enable
    any help please for correct commands i shall use? please see attached file for details.

Maybe you are looking for