How to change value in PPMeter field in IQ02

Hi,
Please guide me how can we change the value in PPMeter field in IQ02(in tab 'other').
The device has already been installed and billing for several months has also been done.
Please guide.
Thanks and Regards
Edited by: MPVash Vash on Dec 4, 2008 7:06 AM

Transactions SMOD and CMOD are available for enhancing and preassigning fields for devices.
There is one customer exit under the SAP enhancement EMDK0001.
When creating a device using Plant Maintenance (PM), you can enter data directly onto the Other tab page. You do this by using transaction IQ01 to define enhancement ITOB0001. This is not possible via transaction IQ04. In change mode, however, you can use both transactions to access customer-specific fields.
Table EQUI contains device data. The customer include CI_EQUL is used to include customer-specific fields in the database table. You cannot preassign fields for devices. You can use the field selection to display fields for device and connection (both based on equipment) differently.
Regards,
Shiva Kumar

Similar Messages

  • How to enter values in the fields of standard SAP Infotype e.g. IT0024

    Hi,
    How to enter values in the fields of standard SAP Infotype?
    e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
    1-Level 1
    2-Level 2
    3-Level 3
    4-Level 4
    5-Level 5
    Thanks,
    Ameet

    Hi Divya,
    I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
    Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
    Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
    Please help me out. I think I am almost there.
    Thanks,
    Ameet

  • How to change value of ${eol} from \n to \r\n, writing by File Adapter

    Hi All,
    How to change value of ${eol} from \n to \r\n, while writing file through File Adapter.
    As my file is being created in Linux environment, so for new line separater, \n is used. I mounted this file directory to windows System.
    As Windows requires \r\n for new line seperator. So I need to change value of ${eol} in the Schema created for file writing.
    Can any one provide help regarding this.
    Thanks in advance

    Hi,
    When an XML payload is written to a file \n would be used as the default line separator regardless of if its windows or linux, as per the XML specification http://www.w3.org/TR/REC-xml/#sec-line-ends.
    As such, one need not worry about the line separators because, the XML file would eventually be processed by a parser which usually would be able to understand both line endings (as they are whitespace characters as far as the parser is concerned).
    If you want to convert the line terminators (for readability etc), 10.1.3.4 has a new feature - in the XML schema definition for the file adapter payload, add these two top level directives to the schema element:
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    nxsd:normalizeLineTerminators="false"
    Regards,
    Shanmu.

  • Changing value of a field in mapping as per condition

    Hi Experts,
    I have one requirement in IDoc mapping to EDI structure.
    I want to change the value of a field depending on the condition. But the problem is the field is mapped at higher level than the condition.
    For example:
    Say i have a source structure in IDoc with name Source1 and target structure Target1. Source1 is mapped to Target1. Both of these structures have multiple occurances. So in general out structure will look something like below:
    Source1-> Target1
    Source2->Target2
    Source3->Target3
    Now i want to change value of one field from Target1 structure depending on Value of one field from Source3. At the runtime when Target1 structure is getting filled Source3 value is not visible so I am not able to set a proper condition.
    When at lower level we get value of Source3 can we change value of already filled structure Target1?
    Thanks,
    Atul

    Hi Aamir,
    Thanks for your reply.
    If possible can you give any sample code for this kind of UDF?
    Thanks,
    Atul Patil

  • How can we change value of a field in the Repeating Table using SharePoint Workflow 2013.

    Hi
    I have an InfoPath form published on a SharePoint Library. The form contains a Repeating table and after submit a workflow runs. In this workflow I want to change some values of the fields within Repeating table.
    How can I do this?
    Thanks.

    Hi,
    I found a similar thread posted by you here:
    http://social.technet.microsoft.com/Forums/en-US/e1fa36c1-cb5c-456d-ba40-2f26301913d2/how-to-loop-through-each-row-in-a-repeating-table-using-sharepoint-workflows?forum=sharepointgeneralprevious
    I suppose both the threads are reuqesting the method to get values from repeating table via workflow, so we can focus on the issue on the other case. If there is more requestment here, let me know.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • User Exit: AFAR0002. How to change value in field: ANLC - NAFAP?

    Hi,
    At the moment I am working on custom Depreciation Key for which the depreciation for period (and subperiods) will be recounted and taken into account for depreciation posting.
    I try to use exit AFAR0002 for this purpose.
    I am able to count and change the value of depreciation for each subperiods. The problem is, that I cannot change the value of "Ordinary depreciation that is planned for the asset in the current fiscal year" for the pierod '000'. Due to this, in the last period of the current fiscal year system tries to reverse the sum of planned depreciation in previous subperiods. It simply tries to meet the "planned depreciation for fiscal year' with the sum of planned depreciation for subperiods.
    example:
    ANLC-NAFAP = 100.
    Active Asset value = 1000
    Depreciation for periods:
    001     ->     -50
    002     ->     -50
    003     ->     -50
    004     ->     -50
    005     ->     -50
    006     ->     -50
    007     ->     -50
    008     ->     -50
    009     ->     -50
    010     ->     -50
    011     ->     -50
    *012     ->     450
    planned value -> -100
    The questions are:
    1. is it possible to change value in ANLC-NAFAP in this exit
    2. How it sould be done.
    Thanks in advance for help.
    Regards,
    Wojciech

    Dear Paul,
    I had run AFAR. The report changed to '0' the value of ANLC-NAFAP  field - sth changed - thanks.
    But I still have a problem to set this value to the sum of planned depreciation for each month. At the moment, in the last period the system tries to reverse all planned "sub"depreciation to '0' in total.
    Is it any additional condition that has to be fulfilled in order to change the value of "Ordinary depreciation that is planned for the asset in the current fiscal year" for the pierod '000'?
    Regards,
    Wojciech

  • How to change value date field

    HI,
    After posting the transaction data into the document , is it possible to change the 'value date' . if it is possible pl.give me guidelines . As i know it is possible to change "Assignmentand Text filed"
    This is my user Requirement to change " Value date field".
    Regards,
    Prabhakar

    Hi,
    Check in document change FB02.
      It may allow you to change the value date. If it is not allow to change the filed then create value date in
      Document Change Rules, Document Header.
    Regards,
    Sankar

  • How to change crystal report data field at runtime ?

    Hello everyone,
    I have a Crystal Report file ,which i am using to generate report for my windows form project .
    In that report i have a filed called as Quantity which data type is set as decimal, the requirement is like that the number of value those comes after decimal point that should be set according to the value which is given by the user at the run time .
    For eg: If user gives 1 at the run time then the report Qty field value set one value after decimal point. Like 12.1
    if user gives 2 then Qty field the value is 12.22 like tat  but user can give from zero to any number.. and if it is zero it should not show decimal
    Note: The main idea hear is how to change the filed in Crystal Report decimal point value by using code(or we say writing code we need to set manually as user input it will change)
    Can any body help me how to solve this issue .
    S.K Nayak

    I think you could probably make the field you see a formula field and take a parameter as the number of decimal places.
    totext converts a number to a string.
    totext({decimalField}, 2)
    That's 2 decimal places.
    You could probably substitute a {parameter} for that 2.
    If not then you could substitute an entire formula.
    To explore formulas:
    foreach (FormulaFieldDefinition f in rpt.DataDefinition.FormulaFields)
    MessageBox.Show(f.Name);
    // f.Text = your new formula
    Where rpt is an instantiated report.
    Or add another string field which you display in the column and do the calculation with the original decimal.
    Hope that helps.
    Recent Technet articles:
    Property List Editing;  
    Dynamic XAML

  • How to change value of instance variable and local variable at run time?

    As we can change value at run time using debug mode of Eclipse. I want to do this by using a standalone prgram from where I can change the value of a variable at runtime.
    Suppose I have a class, say employee like -
    class employee {
    public String name;
    employee(String name){
    this.name = name;
    public int showSalary(){
    int salary = 10000;
    return salary;
    public String showName()
    return name;
    i want to change the value of instance variable "name" and local variable "salary" from a stand alone program?
    My standalone program will not use employee class; i mean not creating any instance or extending it. This is being used by any other calss in project.
    Can someone tell me how to change these value?
    Please help
    Regards,
    Sujeet Sharma

    This is the tutorial You should interest in. According to 'name' field of the class, it's value can be change with reflection. I'm not sure if local variable ('salary') can be changed - rather not.

  • Change value in a field and reflect value of another field

    Hi all,
    I have a situation here where in the Single Customer View, under the Completed Task. When I changed the value of a field name called Status to "Completed" in the Edit screen and I save it, another field that is in the same screen called "Completed Date" will auto populate the current date as value. may I know how do I achieve this?
    Thanks and appreciate for help
    Regards,
    Anson

    Hi !
    You've got to create a workflow rule on Activity with the event trigger Before modified record saved.
    The condition will be like this :
    *[<Status>]=LookupValue("EVENT_STATUS", "Completed") AND [<Status>]<>PRE('<Status>')*
    Then the action of this rule will update the field *"Completed Date"* with the value Today().
    But you don't have to do it for the completed date field, because it's already filled automatically when you change the status to completed.
    Hope this will help, feel free to ask more !
    Max

  • How to change value in BADI

    I want to change value of field afnam based on the following code below in BADI ME_PROCESS_REQ_CUST.
    But this code give me endless loop.  Is there anything missing in my coding?Please correct me, Thank you.
      data : obj_pr type MEREQ_ITEM,
             wa_eine type eine.
    CALL METHOD IM_ITEM->get_data
    RECEIVING
    re_data = obj_pr.
      if obj_pr-infnr <> space.
        select single * into wa_eine from eine
        where infnr = obj_pr-infnr.
        if sy-subrc = 0.
          obj_pr-afnam = wa_eine-effpr.
        endif.
      endif.
    CALL METHOD IM_ITEM->set_data
    EXPORTING
    im_data = obj_pr.

    Hi Jessie,
    As per my understanding, the thing is that, in BADI  "ME_PROCESS_REQ_CUST", there is a method called "CLOSE".
    you have to implement this method to close the processing....
    work on triggering the method first and if it triggers, then implement the coding and see how it is working....
    thanks,
    Vishnu.

  • How to change value date from posting date to net due date

    Hi Gurus,
    My client wants to change value date from posting date to net due date. currently posting date is considered as value date but in future client wants to change value date to net due date of documents.
    1. what configurations need to be maintained to change value date from posting date to net due date.
    2. Will these changes effect automatic payment run.
    Thanks and Regards,
    Suresh

    Hi Suresh,
    In Future
    While posting the documents you can mention the value date as due date of the documents.
    For already posted documents
    You can change the value date to net due date.
    If the value date is display mode i.e. if you are not able to change the value date in FB02 (Document Change Mode), use OB32 transaction and make value date field as eidtable (BSEG-VALUT).
    In OB32 transaction enter all the required fields like Account type, transaction type, company code and finally activate the Field can be changed check box.
    But not sure, whether we can change the value date to previous date or not?
    This would help you..
    Regards,
    Praisty
    Edited by: Praisty on Jul 28, 2009 9:56 AM

  • How to populate value in other field after entering in one field?

    hi everyone.
      when i enter value in one field , automatically some xyz value should be populated  in second field. How would this be possible without any enter? I mean i don want to perform any action like press enter or like that.

    Hello manumb6 ,
    You coud also use "TimedTrigger" UI element for the same and you can specify the "delay" value in seconds.
    Suppose if you enter x value.
    After X seconds it will trigger the particular action associated to UI element.
    My suggestion would be that you generate this UI element Dynamically when you expect end user to enter the value in the input field and system would keep invoking the method and as soon as your objective is met, Delete the UI element .
    Hope this would help.
    Regards
    Anurag Chopra

  • How to Change Open Item Management Field in GL Master Record

    Hi,
    How to change the field Open Item Management becz eventhough I tried through in norrmal way of making it that GL balance to 0 and made the change after that it not allowing to save and throwing the following errors,
    Account Balance = 0 but open items exist is the error coming,
    Can any one plz advice ?

    Hi,
    Once transaction data is posted, GL Account cannot be made into an open item managed account. However, you can consider the following options:
    1. GL Account Balance is ZERO: If the GL Account balance is ZERO, the GL Master record can be changed to Open Item managed Account or vice versa. But this will not change the transaction data already posted. Only future transaction data will be open item managed.
    2. Until SAP version 4.0B SAP has provided a program to convert a GL Account to open item managed account after transaction data is posted (or vice versa). You can execute this program by blocking the GL Account and this will make the required changes in tables and also change GL Master record.
    But this program is not available for execution in higher versions. Hence, you can copy the program into a Z Program and execute it. The name of the standard program is RFSEPA02.
    Thanks
    Murali.

  • How to change standard selection-screen fields

    hi i am kishore.
    i have requirement.
    i have to change selection-screen label purchase order to purchase docuement in request for quatation.
    pls suggest that how to change the standard selection screen field labels.

    Hi.
    This is possible.
    Just try out this way.Heres is an example. 
    TABLES: pernr.
    data: i_tab type standard table of RSSELTEXTS with header line.
    initialization.
    i_tab-name = 'PNPPERNR'.
    i_tab-kind = 'S'.
    i_tab-text = 'Employee ID'.
    append i_tab.
    CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
      EXPORTING
        program                           = 'ZESO_TEST'
      tables
        seltexts                          = i_tab
    EXCEPTIONS
      PROGRAM_NOT_FOUND                 = 1
      PROGRAM_CANNOT_BE_GENERATED       = 2
      OTHERS                            = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Thanks and regards,
    Maheshwari.V

Maybe you are looking for