How to change values of a characterstic at runtime?

Hi,
How to change the values of characterstic at runtime?
for example if the characterstic contains values like P and A. i need to change all the P values as PLAN in the query output at runtime.
Note: I cant use cell editor, because there are no stuctres in the query definition.
Regards,
Ravi

Hi,
Probably i was not clear in my question.
for example characterstic ZPL contations Keys P and A with respectve texts PL and AC.
but in the 10th query they dont want to see the text as PL but as PLAN. in the remaing queries they want to see the text as PL.
I know we can do it using table interface in WAD-Table web item.
If there any we can do this requirement in Bex designer?
Regards,
Ravi.

Similar Messages

How to change value of ${eol} from \n to \r\n, writing by File Adapter

Hi All,
How to change value of ${eol} from \n to \r\n, while writing file through File Adapter.
As my file is being created in Linux environment, so for new line separater, \n is used. I mounted this file directory to windows System.
As Windows requires \r\n for new line seperator. So I need to change value of ${eol} in the Schema created for file writing.
Can any one provide help regarding this.
Thanks in advance

Hi,
When an XML payload is written to a file \n would be used as the default line separator regardless of if its windows or linux, as per the XML specification http://www.w3.org/TR/REC-xml/#sec-line-ends.
As such, one need not worry about the line separators because, the XML file would eventually be processed by a parser which usually would be able to understand both line endings (as they are whitespace characters as far as the parser is concerned).
If you want to convert the line terminators (for readability etc), 10.1.3.4 has a new feature - in the XML schema definition for the file adapter payload, add these two top level directives to the schema element:
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
nxsd:normalizeLineTerminators="false"
Regards,
Shanmu.

How to change value of instance variable and local variable at run time?

As we can change value at run time using debug mode of Eclipse. I want to do this by using a standalone prgram from where I can change the value of a variable at runtime.
Suppose I have a class, say employee like -
class employee {
public String name;
employee(String name){
this.name = name;
public int showSalary(){
int salary = 10000;
return salary;
public String showName()
return name;
i want to change the value of instance variable "name" and local variable "salary" from a stand alone program?
My standalone program will not use employee class; i mean not creating any instance or extending it. This is being used by any other calss in project.
Can someone tell me how to change these value?
Please help
Regards,
Sujeet Sharma

This is the tutorial You should interest in. According to 'name' field of the class, it's value can be change with reflection. I'm not sure if local variable ('salary') can be changed - rather not.

User Exit: AFAR0002. How to change value in field: ANLC - NAFAP?

Hi,
At the moment I am working on custom Depreciation Key for which the depreciation for period (and subperiods) will be recounted and taken into account for depreciation posting.
I try to use exit AFAR0002 for this purpose.
I am able to count and change the value of depreciation for each subperiods. The problem is, that I cannot change the value of "Ordinary depreciation that is planned for the asset in the current fiscal year" for the pierod '000'. Due to this, in the last period of the current fiscal year system tries to reverse the sum of planned depreciation in previous subperiods. It simply tries to meet the "planned depreciation for fiscal year' with the sum of planned depreciation for subperiods.
example:
ANLC-NAFAP = 100.
Active Asset value = 1000
Depreciation for periods:
001     ->     -50
002     ->     -50
003     ->     -50
004     ->     -50
005     ->     -50
006     ->     -50
007     ->     -50
008     ->     -50
009     ->     -50
010     ->     -50
011     ->     -50
*012     ->     450
planned value -> -100
The questions are:
1. is it possible to change value in ANLC-NAFAP in this exit
2. How it sould be done.
Thanks in advance for help.
Regards,
Wojciech

Dear Paul,
I had run AFAR. The report changed to '0' the value of ANLC-NAFAP field - sth changed - thanks.
But I still have a problem to set this value to the sum of planned depreciation for each month. At the moment, in the last period the system tries to reverse all planned "sub"depreciation to '0' in total.
Is it any additional condition that has to be fulfilled in order to change the value of "Ordinary depreciation that is planned for the asset in the current fiscal year" for the pierod '000'?
Regards,
Wojciech

How to change value in BADI

I want to change value of field afnam based on the following code below in BADI ME_PROCESS_REQ_CUST.
But this code give me endless loop. Is there anything missing in my coding?Please correct me, Thank you.
data : obj_pr type MEREQ_ITEM,
         wa_eine type eine.
CALL METHOD IM_ITEM->get_data
RECEIVING
re_data = obj_pr.
if obj_pr-infnr <> space.
    select single * into wa_eine from eine
    where infnr = obj_pr-infnr.
    if sy-subrc = 0.
      obj_pr-afnam = wa_eine-effpr.
    endif.
endif.
CALL METHOD IM_ITEM->set_data
EXPORTING
im_data = obj_pr.

Hi Jessie,
As per my understanding, the thing is that, in BADI "ME_PROCESS_REQ_CUST", there is a method called "CLOSE".
you have to implement this method to close the processing....
work on triggering the method first and if it triggers, then implement the coding and see how it is working....
thanks,
Vishnu.

How to change value of element and update XML file

Hi
I have an xml file called test.xml like below
<?xml version="1.0" encoding="UTF-8"?>
<printing>
     <userName/>
     <viewName/>
</printing>I want to change value of user name and view name and update test.xml file in my folder
Anyone has sample code to do so
Ashish

Thanx
i was able to do so, but what i want now is to remove element
for example
i have following xml
<?xml version="1.0" encoding="UTF-8"?>
<printing>
<firstLineTexts>
          <firstLineText />
          <firstLineText>|line11</firstLineText>
          <firstLineText>|line12</firstLineText>
</firstLineTexts>
</printing>how do i remove all elements fireLineText
my final output should be
<?xml version="1.0" encoding="UTF-8"?>
<printing>
<firstLineTexts>
</firstLineTexts>
</printing>How do i do it using DOM,
I can create instance of DOM and write it using TransformerFactory
Ashish

How to change value date from posting date to net due date

Hi Gurus,
My client wants to change value date from posting date to net due date. currently posting date is considered as value date but in future client wants to change value date to net due date of documents.
1. what configurations need to be maintained to change value date from posting date to net due date.
2. Will these changes effect automatic payment run.
Thanks and Regards,
Suresh

Hi Suresh,
In Future
While posting the documents you can mention the value date as due date of the documents.
For already posted documents
You can change the value date to net due date.
If the value date is display mode i.e. if you are not able to change the value date in FB02 (Document Change Mode), use OB32 transaction and make value date field as eidtable (BSEG-VALUT).
In OB32 transaction enter all the required fields like Account type, transaction type, company code and finally activate the Field can be changed check box.
But not sure, whether we can change the value date to previous date or not?
This would help you..
Regards,
Praisty
Edited by: Praisty on Jul 28, 2009 9:56 AM

How to change values in table TPFID (Description of SAP instance)

I am having problems with my system - I noticed that table TPFID has the incorrect HOST settings, but I can;t figure out how to change this.
Any advice would be very appreciated!

That is your operation modes in RZ04, just delete the invalid host from the list and then go settings -> based on current status -> Existing instances ->set
Regards
Juan

How to change value of auto reload

Hi, I want to cahnge the amount charged to my credit card when I do a reload or make a payment. It is currently set for $16 and I want to make it $8 or $10. I can't figure out how to change the amount, how do I change the amount billed to my credit card?

Hi,
When an XML payload is written to a file \n would be used as the default line separator regardless of if its windows or linux, as per the XML specification http://www.w3.org/TR/REC-xml/#sec-line-ends.
As such, one need not worry about the line separators because, the XML file would eventually be processed by a parser which usually would be able to understand both line endings (as they are whitespace characters as far as the parser is concerned).
If you want to convert the line terminators (for readability etc), 10.1.3.4 has a new feature - in the XML schema definition for the file adapter payload, add these two top level directives to the schema element:
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
nxsd:normalizeLineTerminators="false"
Regards,
Shanmu.

How to change value date field

HI,
After posting the transaction data into the document , is it possible to change the 'value date' . if it is possible pl.give me guidelines . As i know it is possible to change "Assignmentand Text filed"
This is my user Requirement to change " Value date field".
Regards,
Prabhakar

Hi,
Check in document change FB02.
It may allow you to change the value date. If it is not allow to change the filed then create value date in
Document Change Rules, Document Header.
Regards,
Sankar

How to change value separator for html_Get function?

I have application process, which gives invoice related information (date, amount,number). I run this process using html_Get function. Problem is with invoice amount. In polish localization decimal separator is comma (,). Then for an invoice issued today with value 1100.20 with number AA1 process returns: 2010-07-01,1100,20,AA1. It seems to be 4 values instead of expected 3.
Is it possible to change value separator to ';'? Or maybe there is another solution for this problem.
regards,
Krystian

hmmm join(separator) function
Joins together all the elements in an array to produce a single string. If no separator argument is passed through a comma is assumed.
<script type="text/javascript">
var scripts = new Array();
scripts[0] = "PHP";
scripts[1] = "ASP";
scripts[2] = "JavaScript";
scripts[3] = "HTML";
var str=scripts.join(" : ");
document.write(str);
//document.write(scripts.join(" <br> "));
</script>
had to do research myself and found this, don't know if this will help you out tho..

How to change crystal report data field at runtime ?

Hello everyone,
I have a Crystal Report file ,which i am using to generate report for my windows form project .
In that report i have a filed called as Quantity which data type is set as decimal, the requirement is like that the number of value those comes after decimal point that should be set according to the value which is given by the user at the run time .
For eg: If user gives 1 at the run time then the report Qty field value set one value after decimal point. Like 12.1
if user gives 2 then Qty field the value is 12.22 like tat but user can give from zero to any number.. and if it is zero it should not show decimal
Note: The main idea hear is how to change the filed in Crystal Report decimal point value by using code(or we say writing code we need to set manually as user input it will change)
Can any body help me how to solve this issue .
S.K Nayak

I think you could probably make the field you see a formula field and take a parameter as the number of decimal places.
totext converts a number to a string.
totext({decimalField}, 2)
That's 2 decimal places.
You could probably substitute a {parameter} for that 2.
If not then you could substitute an entire formula.
To explore formulas:
foreach (FormulaFieldDefinition f in rpt.DataDefinition.FormulaFields)
MessageBox.Show(f.Name);
// f.Text = your new formula
Where rpt is an instantiated report.
Or add another string field which you display in the column and do the calculation with the original decimal.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

How to change Flex Application frame rate at runtime

hello,
i have Flex application that need to change the Frame Rate at
runtime.
when i am changing it by using the slider component, here the
code:
private function onChangeSlider(e:Event):void
frameRate = sliderFR.value;
trace(frameRate);
<mx:HSlider id="sliderFR" x="452" y="765" width="378.2"
minimum="1" maximum="50" liveDragging="true" snapInterval="1"
value="25" change="onChangeSlider(event)"/>
the value is changed, but the frame rate is not changed.
when i insert the binding to the <Application> tag i
got error on this one, because i can't bind there items for the
application level.
how can i change the Flex frame rate at runtime?

i found the solution!
in Flex application you have frameRate properties that
doesn't work at runtime in the ActionScript code.
if you have a video that you want to change the speed of it,
you need to change the stage.frameRate (of all the Player itself).
and there is a catch here. if you will try to change it right after
the application will start (like in: creationComplete event) you
will have a runtime error.
what you need to do is, change the stage.frameRate value
after the all application is started from a button or other event
in the system.
this is working grate for fast/slow FLV playing
enjoy!

How to change the screen field text in runtime

Hi ,
I want to change the screen button text in runtime IN ABAP dynpro screens. if anybody know this please post some helpful answer
Regards,
Anil kumar G

Hi Anil..
We can change the Text of a Pushbutton dynamically.
For this:
1. Declare a Global variable with the Same name as the Button in TOP include
Eg:   Data: Button1(30).
2. In the PBO module of the Screen assign the Text to this variable:
   Eg:
    Module set_text OUTPUT.
        Button1 = 'This is the text'.
    ENDMODULE.
<b>REWARD IF HELPFUL.</b>

How to change values in the form?

Hi guys,
I am working on a small JSP project. I have a form in a page. It has several textboxes getting inputs from the user. In the JSP code, I want to change the value of the textbox based on the some condition in the JSP code:
<form ... action="the same page">
<input type="text name="theTextBox" value="" ...>
<%
if (javaObject.changeTextMethod() == true)
//I want to change the value of the textbox to something else here, I can't say theTextBox.value="whatever"
%>
If I create a form again, I have to write the same code many times. Is there anyway that I can reuse the form code and just change the values of the textbox?
Thanks in advance!
~Ji

Hi,
Thanks!
But when I try javascript. It seems in JSP code, the javacript function cannot be seen.
<SCRIPT language=javascript>
function change()
tBoxName.value="newValue";
</SCRIPT>
<%
if (condtion == true)
change(); // The error is: change() is not defined.
%>
Also, if the textbox is insice <form> </form>, in javascript function, the textbox cannot be seen either. Would you please tell me how exactly to use javascript in this situation? Thanks a lot!
~Ji

How to change values of a characterstic at runtime?

Similar Messages

Maybe you are looking for