How to change view in iPhone from vertical to horizon and vice versa?

Not all applications will go from Portrait to Landscape. Changing just requires you to turn the device. However, if you have the orientation lock activated, then it will not change to landscape. To check, look in the status bar and see if you can see a small lock shaped icon near the battery icon. If you do, then orientation lock is activated. To turn it off, swipe upwards from the bottom of the iPhone screen to bring up Control Center. The orientation lock is the last icon on the top row to the right. Tap on it to turn it off. White is on, black is off.

Similar Messages

How can user view Central Person ID by Personnel Number and Vice Versa?

Dear Experts,
We are not using Concurrent Employment, but since Talent Management requires to use the Central Person object, we have created the relative objects for the employees. What I want to know is, how can user view the Central Person ID by a personnel number and vice versa easily?
Thanks,
Steven

Not User friedly
This logic is in Function Group HRTMC_PPOM, screens 0700 and 0710.
You can copy it to Z and change search.
In transaction OOFRAMEWORKCUST for scenario TMC_PPOM change Report in "Tab Page in Scenario for each Object Type" from HRTMC_PPOM to new Z*.

How can I sync my iPhone contacts to my Mac and vice-versa, without losing them? Can i do it with iCloud?

I always add new phone numbers on my iPhone Contacts, while new email addresses are always added on my Mac Contacts. The result is that I dont have my recent email contacts on my phone, while on the Mac I dont have the recent phones.
I would like to have ONE common list of contacts (same for iPhone & Mac) which will be AUTOMATICALLY updated for both, once I add a new entry.
I am not sure how to do this with syncing, I am afraid I wll lose my old contacts. Can I do this with iCloud?

Hello there, Seta.
You are correct that this can be done with iCloud. The following Knowledge Base article provides some great instruction for syncing contacts:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
Particularly:
Contacts, Calendars, Bookmarks, and Notes
You can sync contacts, calendars, bookmarks, and notes with other applications on your computer. This allows you to keep all your information in sync across multiple computers and iOS devices. The settings for these items are all in the Info tab for your iOS device in iTunes. With your iOS device connected to the computer, select your iOS device. Then click the Info tab.
For details on syncing content on your iOS device with your computer, click the sections below.
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista, Windows 7, and Windows 8)
Address Book (Mac OS X v10.7 and earlier)
Contacts (Mac OS X v10.8)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I stop my iPhone from synching my contacts and groups lists twice?

How can I stop my iPhone from synching my contacts and groups lists twice....I am using iCloud but am not sure how correct this duplication.

Go into Settings>Mail, Contacts, Calendars. Is this happening at the bottom in the signature section, or in the header of the mail where your email address is? If it is the signature, then go to the Signature area of the Mail settings. If this is in the header, then go to the account in question and edit your account information to include your name instead of Johnny.

I would like to buy iphone4$ in Canada for my brother who lives in Russia. is it possible to change language on iphone from English to Russian, and will this phone work in Russia?

i would like to buy iphone4$ in Canada for my brother who lives in Russia. is it possible to change language on iphone from English to Russian, and will this phone work in Russia?

Language change is no problem, you can switch to anything in the tech specs.
http://www.apple.com/iphone/specs.html

How to sync my iPhone to my MacBook Pro and vice versa as it no longer seems to be doing?

How to sync my iphone to my MacBook Pro and vice versa as it no longer seems to be doing? When I initially set up everything it worked fine; however, now my contacts are not syncing between devices?
I have Icloud and even paid for ectra storage to see if this was the issue but it doesnt seems to be. When I try and view devices on my itunes to sync it will not allow - blank option?
If anyone could please help it would be really appreciated- thanks in advance:)

I don't know how you got to your current position, but you might want to start by replacing your calendar with your MacBook Pro calendar if it is correct (if it isn't, skip this): first disable calendar syncing on your phone (Settings>iCloud>Calendars set to OFF), then prior to syncing open iTunes on your computer and disable automatic syncing (under Preferences>Devices>Disable...from syncing automatically syncing). Next connect your phone and set your sync settings on the Info tab to Syc Calendars with iCal, and below under Advanced choose "Replace Information on this iPhone" and check Calendars. Now sync and this will hopefully replicate your MacBook calendar on your iPhone.
Next, carefully review this to see that you have correctly set up iCloud on both your phone and your MacBook: http://www.apple.com/icloud/setup/, and that your meet the minimum system requirements (latest version of iOS on your phone, latest version of iTunes, OSX Lion 10.7.2 or later).

How to sync garageband projects from mac to iPad and vice versa

how can I sync garageband projects from iPad to MAC and vice versa

Hi Marko,
Please send your .muse file to [email protected] Add link to this forum post and refer it to me. I'll investigate the issue.
Also, please send the file you created on MAC.
Regards,
Aish

UCCX changing time variables from AM to PM and vice-versa

Hi all.
I have an extremely irritating issue that I'm hoping someone can shed some light on.
I'm currently making improvements to one of our contact centre scripts. We require to activate redirection on the fly quite often, and in the past I used a modified script with different time of day tests.Going forward I wanted to provide the ability for this to be activated and times set through the GUI.
So I made some variables as parameters, of note these are RedirectOperation (boolean), RedirectFrom (Time) and RedirectUntil(Time).
The flow is that if RedirectOperation is true, a time test is performed to dictate when we redirect - this is in the form of:
(T[now] >= RedirectFrom) && (T[now] <= RedirectUntil)
Now I know I can use T[now].before(xxx) etc but the operation itself isn't the issue, it does work perfectly fine this way, but the times change from AM <<>> PM under certain conditions.
To explain:
I set the default (on the script itself) RedirectFrom to "T[6:00:00 PM]" and RedirectUntil to "T[11:59:59 PM]".
When debugging the script, I can see that the system changes the times from PM to AM (under the variable list on CCX editor during a reactive debug) ! That's if I've not selected these parameters on the GUI. If however, I do select the parameters and still use the default values, when debugging, they stay as PM!!
This is surely a bug??
To try something else, I changed my time format to 24 hour clock - so 18:00:00 and 23:59:59 respectively. I can set these on the script itself, and if the parameters are unchecked and left at default, it works fine. However when I select the parameter and try to change the times to (for example) 19:00:00 and 22:59:59, the GUI spits an error saying:"* Please enter a valid date for the Date configurable variable." I can only assume there is a mismatch between what you're allowed to put into the script and what the GUI thinks you're allowed to.
But certainly the script surely should not be changing between AM and PM when a variable is left to default??
Any ideas would be greatly appreciated!
Thanks in advance.
Scotty

After choosing your start time you should be able to click to the right to change from AM to PM or vice versa by using the up/down button. I just did it.
If your DVR is not cooperating, try rebooting it.

My screen goes off and on once its changes power from AC to Battery and vice versa

Dear All
I started noticing this from today ownwards that whenever the power is switched off and goes to battery mode and vice versa the screen turns off and on for 1 second. I dont know this is normal or i did mess up with some kind of power options. I am using T410i.
Please help me out in this.
Solved!
Go to Solution.

Hi sanku500, and welcome to the Lenovo User Community!
What you're seeing is the video refresh rate switching:
http://forums.lenovo.com/t5/ThinkPad-Edge-Knowledge-Base/Display-screen-flickers-blinks-goes-blank-o...
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

Replication of Custom Fields from CRM to ISU and Vice versa

Hi Experts,
We are working on adding Z fields on BP level. For this how does the replication of the values takes place from CRM to ISU or vice versa. What are the middleware enhancement we need to do in CRM side or in the ISU side. We would add the fields on web UI crm side by AET but at ISU side how we need to do that and how would the field values replicate in both the system.
A approach for adding BP custom fields in CRM and its interaction with ISU and vice versa would be appriciated.
Thanks,
Mayur

Excuse, you may enter more in detail?
I have created a custom field on BP using the AET would now like to replicate this custom field in BP also in ISU.
I can do all this using the EEWB, but I would avoid it, since, in ISU we already have custom fields on BP, I just can not link them with CRM.

How to convert a data set into a xml data and vice versa

i am new to oracle with xml..
my aim is to convert a data set into a xml data and vice versa..
my work is as follows...
my query:
select rggpk,rggcode,rggname from ms_regiongeo
to convert a data set into a xml*
select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual;
(this works fine and output of this query is as follows..)
<ROWSET>
<ROW>
<RGGPK>201</RGGPK>
<RGGCODE>Asia</RGGCODE>
<RGGNAME>Asia</RGGNAME>
</ROW>
<ROW>
<RGGPK>1</RGGPK>
<RGGCODE>OTH</RGGCODE>
<RGGNAME>Others</RGGNAME>
</ROW>
<ROW>
<RGGPK>21</RGGPK>
<RGGCODE>COB</RGGCODE>
<RGGNAME>Africa and Yemen</RGGNAME>
</ROW>
<ROW>
<RGGPK>2</RGGPK>
<RGGCODE>AUS</RGGCODE>
<RGGNAME>Australia</RGGNAME>
</ROW>
<ROW>
<RGGPK>23</RGGPK>
<RGGCODE>IND</RGGCODE>
<RGGNAME>Indian Sub Continent</RGGNAME>
</ROW>
<ROW>
<RGGPK>24</RGGPK>
<RGGCODE>TVM</RGGCODE>
<RGGNAME>North America</RGGNAME>
</ROW>
</ROWSET>
and to reverse this process, I tried a query like this..*
select EXTRACTVALUE (XML_DATA,'ROWSET/ROW/RGGPK') as EMP_ID
from(
select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual
)tab1but failed.. and raised with an eror: ORA-19025
help me..
regards,
john

Hi-
my aim is to convert a data set into a xml data You can refer to the below posts
Adding namespace to XML output
Re: how to convert table data in xml format based on the xsd.

Is there a tx to view class corresponds to a BOL object and vice versa???

Hello experts, is there any transaction or place where I can find the object BOL that corresponds to a CLASS and vice versa,
For example for object ISUORDERITEM, where I can find this??
Thanks in advance

Hello Javier,
Here is the link :
SPRO --> IMG --> CRM > CRM Cross-Application Components> Generic Interaction Layer/Object Layer --> Basic Settings.
How to find out the component set associated with the BSP UI component ??
Go to the runtime repository of the component which you are working on, In the MODEL, the Component Set should be assigned.
Once you get the component set, You can find the components associated with the component set.
For each component there will be a GENIL Class associated in this IMG customizing.
Eg : For BP , the class is CL_CRM_BUIL.
You can find some infor at this Link: [Thread|Re: Rough Equivalent of PCUI MAC in CRM 2007 Web GUI.]
Hope this helps,
Regards, Vinay

Syncing photos from iPad to macbook and vice versa

I recently synced my ipad with my new macbook air. I successfuly imported all my photos from my iPad to iPhoto on my laptop. However, now everytime I connect my ipad and laptop iPhoto opens and asks me to import all the photos all over again, despite the fact that they are still all there.
I haven't synced my photos with another computer before. I want to be able to add a photo onto my ipad and have it on my laptop and vice versa.
This doesn't have to be done wirelessly, I am happy to only have it happen when I plug them togerther, but I want the same photos on both my laptop and iPad.
I havent really messed around with anything as I am afraid of wiping my photos. I understand that I may have to do this via a third party or something, any help would be great.
Thanks.

Connect the iPad to your Mac then launch iTunes.
Select the iPad under Devices then select Photos from the menu.
Deselect: Sync Photos from
You probably have iPhoto selected from the pop up menu.
Deselecting Sync Photos from should prevent the prompt to sync every time you connect the iPad.

Syncing Labels from Lightroom to Bridge and vice versa.

The labels in Lightroom over-ride those in Bridge and vice versa. I have matched the descriptions of the coloured Labels between Lightroom 2.0 and Bridge, yet when I assign eg. a Green Label in Lighroom and then open Bridge, the Label appears White. If I select those White Labels in Bridge and make them Green, then return to Lightroom and Sync the folder, those formerly Green Labels are converted to White.
Same thing happens with the Reject Flag in Lightroom. It appears as a White Label in Bridge, which I can understand and wouldn't be a problem, were it not for other Coloured Labels in Lightroom displaying as White in Bridge.
Any one have an explanation for this and more importantly a solution. Thanks.

I think you have to assign the exact same name to what the colors represent in both Bridge preferences and in Lightroom preferences.
I don't even remember what the default names Adobe assigns to each of them. I changed the words to the right of the Label colors to read "Red", "Yellow", "Green", "Purple", etc.
When in Lightroom I have to "Save Metadata to File" and then when I browse to that folder in Bridge I see the correct Label color.

Server not found when switching from 4g to wifi and vice versa.

I've had this issue for a while across multiple phones and multiple versions of Firefox for Android, and it does not happen with any other browser (which is upsetting). Whenever I am surfing the web and have multiple tabs open, and I switch from 4g to wifi or vice versa, I always get a "Server not found" error on both existing tabs and new tabs. This is an annoying issue that I am surprised to see hasn't been fixed. The only way I've been able to fix it is to quit and relaunch the app. I have tried removing plug-ins and reinstalling, but it has not helped.
Anything I could do to alleviate the issue?
LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2
Firefox for Android Ver. 35.0.1

''Roland Tanglao [[#answer-698502|said]]''
<blockquote>
Hi scruffy90:
You wrote "LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2 Firefox for Android Ver. 35.0.1 "
I just tried switching between HSPA+ aka 3G and WiFi on a Galaxy S5 running Android 5 and have had no issues but I think this may have been an issue in the past (I did a search for a bug in bugzilla.mozilla.org but couldn't find anything).
Are there any other details you could provide that could help us debug?
e.g.
# Are you using a proxy?
# Who is your WiFi provider?
# Have you tried other WiFi (e.g. the Wifi both at home and work)
Cheers!
...Roland
</blockquote>
Hello Roland,
No proxy on the phone or wi-fi network.
My ISP is Time Warner, but I supply my own router (Linksys e4200)
And this happens on every wi-fi network, at home and away from home.

How to change view in iPhone from vertical to horizon and vice versa?

Similar Messages

Maybe you are looking for