How to change web-app display name within EAR file?

Currently we are deploying an EAR file (which contains a web-app and an EJB) per
BEA recommendations. The web-app shows up on the admin console with '/' as the
name. Is there anyway to change this to the name I want?
thx,
Matt

FYI - here is the entire content of applicaiton.xml in the EAR file we deploy:
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EE Application
1.3//EN' 'http://java.sun.com/dtd/application_1_3.dtd'>
<application>
<display-name>RVApp</display-name>
<module>
<ejb>RVTrackingBean</ejb>
</module>
<module>
<web>
<web-uri>RVWebApp</web-uri>
<context-root>/</context-root>
</web>
</module>
</application>
"Erik Johnson" <[email protected]> wrote:
>
No, you can't change that in the console. It's defined in the application's
application.xml
descriptor file.
erik
"Matt Savino" <[email protected]> wrote:
Currently we are deploying an EAR file (which contains a web-app and
an EJB) per
BEA recommendations. The web-app shows up on the admin console with'/'
as the
name. Is there anyway to change this to the name I want?
thx,
Matt

Similar Messages

How to change the public display name?

How to change the public display name since the last person left the job and I am not new person take it.

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
MSDN and TechNet Profile and Recognition System forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to change the Group Display Name in the UME?

Hello experts,
from time to time due to reorganisation our departments group names change.
So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
Is there a way to configure the UME to allow to modify the Display Names of Groups?
Thanks in advance.
Thomas
Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PM

Thank you for the quick answer.
However my problem is still not solved.
I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
By exporting the group data:
[group]
gid=TeamA
gdesc=All members of Team A
user=member1, member2
There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
So far I didn´t find any solution.
Any other ideas.
Thanks in advance.
Thomas

Change my BBM display name

I have a new Passport. Could someone please help me to understand how to change my BBM display name.
Thank you in advance
Ron

open BBM app, tap on top where name is and then tap on name to change it
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How to put web app to Oracle 8i Jserver ?

I've developed a web app with JDev3.1 , Oracle8i 8.1.6 on NTServer4.0.
and want to put it on Oracle Jserver 8.1.6:
The app works well within JDev3.1.
I depolyed my Business Components project and test well.
I would like to know how to put web app to Jserver. Is it possible?

when you say "web app" i am assuming you mean an applet, servlet or java server page(jsp) ??
if you mean this, then you need to move to the rdbms 8.1.7 environment for this support.
rdbms 8.1.7 supports servlets and jsp's in two different ways :
externally -- on the rdbms 8.1.7 platform
they can be run in an external apache front end included with the 8.1.7 rdbms.
internally -- inside the rdbms 8.1.7
they can be deployed internally to 8.1.7 in the "oracle servlet engine" (ose)
applets and html static pages still need to be deployed to a web server on the mid-tier OR the external apache front end included with the 8.1.7 rdbms to optimize performance.
i hope this helps ...
p.s. if i've misunderstood your question , please restate it.
null

HT1918 How to change my app store password ?

How to change my app store password?

Hi Medhataskar,
If you can't remember your Apple ID Password, or want to change it, use the password retrieval process at My Apple ID. Follow these steps to change your Apple ID Password:
1) Go to My Apple ID and click Reset your password.
2) On the next page, enter your Apple ID Name and click Next.
3) Authenticate by email or by answering the security question.
4) By following the emailed link or answering the security question, you'll be presented the option to reset your Apple ID password.

HT2534 How to change an App Store from US to South Africa

How to change an App Store from US to South Africa

Unknown 1234 wrote:
I have a voucher it will only work in the French app store and I am in the Australian app store how do I change it to the french store
iTunes Gift Cards are only Valid in Country of Issue
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

How to link web app item to different URL other than detail page

Hi, this is probably a bit of a stupid question but I can't find the answer anywhere. On my site, I have projects set up as web apps--I want the customer to be able to click on the title or image for the web app and for it to link to a PDF or blog page, NOT the detail view.
So I want the app title and image to link to a different URL, not detail view.
Here's the page in question, if that helps: http://sherrihaab.businesscatalyst.com/projects
Thanks in advance for any help.

{tag_name_nolink} - Will make the title with no link wrapped around it
{tag_yourimagefield_value} - Will give you the raw source of the file location
You can then form your own image html and links wrapping this and the web app item name text.
To form the link source to go to - create a text custom field and just type or copy and paste a url into that field.

How to debug web app with weblogic?

I wrote a web app that includes jsp files and some javabeans, then I put the jsp files to directory
mydomain\applications\DefaultWebApp
then I complied javabeans and put those classes to
mydomain\applications\DefaultWebApp\WEB-INF\classes
Then I start the weblogic,it runs very well.
I modified some javabean, complie them and put classes override the old classes,
but the web app can not find the new classes.
Any one know How to debug web app(with javabeans) in weblogic?
thanks!

how to config the hot deploy?
thxSorry, for this delay in responding. I had set notify me with email option in Watch This topic; but I never did get any email notification.
I use wls6.1; I think the process may be very similar to this in wls8.x. In wls6.1 (sp5), this is done via the -
Dweblogic.ProductionModeEnabled=False or
Dweblogic.ProductionModeEnabled=True
in the startup cmd/sh script. Out of the box, wls6.1 is set to Dweblogic.ProductionModeEnabled=False which automatically enables hot deploys.

How can I get Sender Display Name using Get-MessageTrackingLog?

Hi, could you please help me. We have got a monitoring system at work which monitors some devices, so if something wrong happening with these devices email is sent from MASTER email (Customer Name <[email protected]>) to us. I'm trying to get a list
of all emails of that monitoring mailbox using PoweShell command
Get-MessageTrackingLog and export them to CSV file. In the end of the day I need CSV file with 3 columns: TimeStamp, MessageSubject and SenderDisplayName! Yes, I need Sender Display Name cause all emails are sent from one MASTER email
(Customer Name <[email protected]>) and only difference between them is sender Display Name which is cexactly what I need.
This is the code I'm using:
Get-MessageTrackingLog -EventId Receive | Select Timestamp, MessageSubject, Sender | Export-CSV C:\NagiosAlerts.csv
–NoTypeInformation
So how can I get sender Display Name(Customer Name) using Get-MessageTrackingLog insted of Sender email (<[email protected]>)?

The DisplayName is not recorded in the Logs only the EmailAddresses are so there Is nothing you can do with Message Tracking to get this the way you want. You need to look at another property may soureIP or include something in the Subject
of the Email (eg a customerId in the Subject is a much better option) to give you some differentiation. Otherwise you need to access the Email directly from the Mailbox it was sent to and then extract the DisplayName from the message (or use a journaling
on those emails etc)
Cheers
Glen

Tomcat web.xml "display-name" using flex.messaging.MessageBrokerServlet

       Hello,
When my web application starts with the BlazeDS servlet flex.messaging.MessageBrokerServlet defined in the web.xml we have an error because in the display-name defined at top level in web.xml we have some text containing character ':'. The error is traced to inside the function
         flex.management.BaseControl.getObjectName()
Which gets the object name, and this function calls
   BaseControl.getApplicationId()
which finally calls
ServletConfig.getServletContext().getServletContextName()
This will return or display-name from the web.xml with all it's text. This text contains among other characters the character ':'. We use this tag for the display in the Tomcat Manager to see version number and other of deployed project.
After retrieving this name it is appended in the getObjectName() function to a buffer, this StringBuffer that already contains flex.runtime. and now this name is appended (still with all that we are using for Tomcat Manager with ':' character and other). After the name, other things are appended. Our problem is that, after constructing this StringBuffer an instance of javax.management.ObjectName is created. In it's constructor it takes a String name as input. This String is parsed in base of characters ':', '*', '?', '\n' and so on, and since we have some of these characters in our display-name it all goes wrong.
   My question is, if this is a bug, a limitation or if it is documented that using flex.messaging.MessageBrokerServlet we can not use certain characters in the display-name of the web.xml?
   Greetings, Tim
   We are using
Tomcat 5.5.23
Jdk 1.5.0_14
blazeds-src-4.0.1.17657
part of web.xml
     <display-name>
         Version: 1.10.0.3 (01/02/2011), Environment development, AGP: 10.220.6.8:1557/AGPSVI, AGP_STAGE: host 10.220.6.8:1557/AGPSVI
     </display-name>
     <description>IMPRESA progetto con undergroung</description>
     <listener>
         <listener-class>flex.messaging.HttpFlexSession</listener-class>
     </listener>
     <servlet>
         <servlet-name>MessageBrokerServlet</servlet-name>
         <display-name>MessageBrokerServlet</display-name>
         <servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
         <init-param>
             <param-name>services.configuration.file</param-name>
             <param-value>/WEB-INF/flex/services-config.xml</param-value>
        </init-param>
         <load-on-startup>1</load-on-startup>
     </servlet>

I have found that this is a bug and there is an issue open at the "Adobe Bug and Issue Management System", BLZ-617. I don't know if work is in progress, but when that issue is closed the problem will be solved.
Greetings, Tim

How to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

how to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

You just need to run the Web Server Configuration Tool to connect ColdFusion to IIS. It can be found in the ColdFusion program group off of the Start menu. Be sure to run it "As Administrator".
-Carl V.

How to change the Dashboard's name?

hi all,
Any one can tell me how to change the Dashboard's name? Seems can only change the page name of Dashboard.
thanks.
Thanks all, i have finished the rename operaiton. but i don't know whether it will have any affects on the existing dashboard pages ?
帖子经 854623编辑过

Go to settings --> Administration --> Manage Presentation Catalog --> Go to your dashboard folder --> _portal --> Edit Name and Description

Instructions How To Add Web Apps

Can someone tell me how to add web apps like the games and flashlight. I'm having a mental block lol Theres no download button on the apple site or in itunes that ive found.
Thanks!

Hi Jraps39
Currently there are 2 answers to this question.
The first applies if your iPod touch hasn't been updated with the January Software Upgrade which you can purchase through the iTunes music store. If this is the case then there is no official supported way of adding buttons to your home screen to those web apps. You can however bookmark them in Safari.
If you have downloaded the January Software Upgrade through the iTunes Music Store then you will be able to tap the plus sign in the middle of the button bar at the bottom of the webpage in Safari and it will give you the option to "Add to Home" which will add an icon to your home screen.
Some users have found alternative methods that are unofficially supported and cannot be mentioned on this forum however I hope the above answers your question.

How can we show only display name with out showing email adress

Guys
Can you please tell me as to How we can show only display name with out showing email adress
Thks&Rgds
--Venkat

http://java.sun.com/products/javamail/javadocs/javax/mail/internet/InternetAddress.html#getPersonal()<<<<<<<<<<<<<<<<
could you please elobarate it. I could not understand it properly
Thank you
--Venkat

How to change web-app display name within EAR file?

Similar Messages

Maybe you are looking for