How to change web screen for Creation of SAP Support Message.

Hi Experts
I need assistance on the following, I need to change the web screen for Creation of SAP Support Message to the user's requirements.
Technical Information About the application and component.
Application: AGS_WORK_INCIDENT_CREATE_APP
Web Dynpro Component: AGS_WORK_INCIDENT_CREATE
Window Info: MAIN
View Information: VWMAIN
Configuration ID: AGS_WORK_INCIDENT_PROCESSOR
Thanks
Nelson

Hi
Is there other solutions?
Thanks

Similar Messages

How to create web-screen for own-created program

Hi experts!
Could you please suggest me:
Some of our end-users have to work with WEBGUI interface. In T-code VL02N we have our userexit SAPLZSDEXIT (Screen 0110). And in WEBGUI we don't see this tab in VL02N. I think I have to generate web-interface for this screen. But how I can make it? This screen was developed by our ABAP-ers in se51 t-code.

Lets be clear here - Web Dynpro ABAP and WebGui/ITS/SAPGUI for HTML are two completely different technologies. If you have a WebGUI screen, you can't enhance it with Web Dynpro ABAP - if that is what you are asking for. If your question is about WebGUI or ITS Transactions, then you are asking it in the wrong forum.

How to change price total for "Change Unit Cost Estimate Screen" for KKE1 Tcode ?

There is a requirement of bringing the Material Price in KKE1 while entering the Item Catogory M ( M for Material) from the Gross Price in the condition type (P001) that is entered in the Purchase order.Currently systems brings the material value from MAP(Moving average Price) in the Material Master data.
I have looked into the user exit 1) EXIT_SAPLKKEC_001 2) EXIT_SAPLKKEC_002 available in this T code KKE1.When I put break-point in these user-exit,it is not going in debugging mode while fetching the price value in Price total column for "Change Unit Cost Estimate" screen in KKE1.
How will change pricing condition for material in KKE1?
I want to change price condition for material as marked in red as shown in the screen-shot.
Where will write the code such that I will bring Price Total based on material number as shown in the image?

Hi Ram,
I think you can do the same in thei manner.
Go to program SAPMV45A.
use menu GOTO -
> Text Elements----
>Text Symbols
Here make change of Text-002 Sold-To Party as saleable .
Regards,
Pravin

How to change material component for a Purchase Order?

How to change material component for a Purchase Order?
I need FM .
PLEASE help

Dear ,
Create PO with item category L....There in Item detail you will get tab for material.
There click in component Button, it will take you to the component screen there you can assign and deassign components.
Hope this helps.
Regards
Utsav

How to Change the Screen Saver Settings to Mystify in Windows 7 using vbscript?

HI All,
How to Change the Screen Saver Settings to Mystify in Windows 7 using vbscript?
Thanks
Divakar

First: What is a GPO?
Second: jrv, that was not too helpful in general. someone should do some actual code.
Bob Blork - Mark as answer if it helped!
This is a forum for technicians and not for home users. GPO is what technical people use to manage Windows. THe script to do this is in the link I posted - how is that not helpful?
I know this is all over your head. I am curious as to why you would respond in a technical forum to a question you do not understand.
We do not provide free scripts. We also will point users at correct answers.
This is not a forum for homw users or for simple support questions. It is also a thread that has been answered for a long time. Perhaps you should start a new thread if you have an actual question about scripting.
¯\_(ツ)_/¯

How to change the Schedule For settings for an object

Hi All,
do you know how to change with BO Enterprise SDK Java the schedule settings for an object?
I mean these settings that can be changed manually In the Objects management area of the CMC, selecting a report object, Schedule tab, Schedule For link:
- Schedule only for myself
- Schedule for specified users and user groups
Rest of settings can be managed with ISchedulingInfo, but I don´t know how to change the "Schedule for" property.
Should I use other SDK?
We have Webi Documents, BOXIE R2 SP2
thanks,
regards,

Hi,
I think I´ve solved it,
we can use
ISchedulingInfo.getMultiPassObjects()
that returns a java.util.Set of user/usergroup IDs on the schedule for multipass.
and then we can work with this Set (adding or removing users and groups).
Setting manually to "Schedule only for myself" in the CMC is the same that removing all the elements from the getMultiPassObjects() set.
thanks,

How to change billing information for my annual subscription as the chart through which I was paying

The option that gives me my brand Subscription error and I can not make changes.

It solved the problem of changing the credit card for payment of a subcripción.
thanks
Date: Wed, 18 Jul 2012 14:22:59 -0600
From: [email protected]
To: [email protected]
Subject: How to change billing information for my annual subscription as the chart through which I was paying
    Re: How to change billing information for my annual subscription as the chart through which I was paying
    created by David__B in Adobe Creative Cloud - View the full discussion
Hi Beto, What information are you attempting to change (address, credit card)? What is the error message you are getting? Would it be possible to post a screen shot of the error? -Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4565913#4565913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4565913#4565913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to change a color for a row in ALV grid display

Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plz

Hello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks!

How I change the icon for iTunes songs?

When I drag iTunes songs onto my desktop the icon is white with a gray iTunes icon. How can change this icon for all of my iTunes songs?

Thanks Patrick. I used Control-Click on the actual audio file on my desktop opened the Show View Options menu and turned off the icon preview option. That changed my icons from gray with a white background to red with a white background which is exactly what I wanted. You pointed me in the right direction. Appreciate it.

How to change Apple ID for all applications in iPad2?

I have changed Apple ID via Settings > Store > Apple ID > Sign out my old Apple ID > Sign in with my new Apple ID.... But, by this method, Apple ID in iCloud, Facetime, and iMessage isn't changed follow to my new one! Do I misunderstand about changing ID? and How to change Apple ID for these applications?
PS. I do not want to do hard reset my iPad2
Thank you all for your kindly help ^^

Go into Settings > iCloud > Account > Change to your new Apple ID
Settings > Messages > Recieve At > New Apple ID
Settings > Facetime > Change to new Apple ID

I cannot find how to change the language for labels in a quiz

I cannot find how to change the language for labels in a quiz

You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

How to use Web Serivce for not jsr 172 phone

Hi:
Is anyone know, how to use web service for phones that only have standard J2ME package installed (without jsr 172 web service packagenstalled)?
thank you

Hi,
I think you need to write the code for this from scratch (built on top of existing HTTP functionality). There may be open-source J2ME code you could use. I've never tried this so I'm afraid I don't know any more. But maybe that is what you were asking... i.e. does anyone have code that does this already...
Tx,
Sam

How to change the Icon for a JFileChooser ?

Has anyone figured out how to change the icon for an instance of JFileChooser from the coffee cup to something else?
I'm on 1.4
Thanks,
Ken

Never mind. I figured it out.
You have to use an instance of JFrame in the call to showXxxxDialog(Component c). Set the icon of the JFrame to what you want the JFileChooser's icon to be.

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

How to change web screen for Creation of SAP Support Message.

Similar Messages

Maybe you are looking for