How to change website assets when...

Hi all
Last year my machine was fried by a power surge. On it was obviously iWeb 08 and all of my assets / iWeb project files etc. I'm pretty sure I have a BUP of the assets from my System Drive but have to track it down off my BUP drives, which isn't a problem. My real problem is working out what needs to be where to restore my project / website build or whatever I should call it. I need advice on what files / file types I would be looking at finding in what directories etc and then where to place them on my new machine. And also how to reauthor / redirect URL navigation or anything else like this...??
BTW I have a feeling I may even have a clone of my System Drive somewhere - I will look for it today however am wanting to pre empt / source any initial information I can in the meantime.
Thanks in advance everyone for your help, any little assistance is greatly appreciated!
TY
Also I will post my results of files / directories I think may be relevant as I find them.
Message was edited by: Mitchell_101

With Skype open click on your display name OR press "Ctrl-I" on your keyboard. This will bring up your profile. To eliminate the address from your profile remove your website address from the Mood section, Website section or anywhere else, if it is displayed there. My mood message is blank so it reads "Enter mood message".

Similar Messages

How to change security codes when you forget them

How to change security codes when you forget them?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(115681)

HT1918 how to change country/region when i have credit balance on account?

how to change country/region when i have credit balance on account?

You need to spend the balance or ask the iTunes Store staff to remove it.
(67937)

I want to know how to change it so when i open a folder full of bookmarks it uses the current bookmark as the first of the group again.

Before updating from version 7 to 8 when i went into my bookmarks, and right clicked on a folder and clicked "Open All In Tabs" it would use the current bookmark that i had open as the first of these in the folder. It would then open the folder's bookmarks to the right of that current bookmark.
I can accept that it no longer opens the group to the right of the current tab easily enough. What annoys me is that it no longer uses the current tab to open the bookmarks. I would like to know how to change this option.

browser.tabs.loadFolderAndReplace
:browser.link.open_newwindow
:browser.search.openintab
references:
* http://kb.mozillazine.org/Browser.tabs.loadFolderAndReplace
* http://kb.mozillazine.org/About:config_entries
* http://dmcritchie.mvps.org/firefox/tabs_config.htm
*http://www.x2b4.com/howto/how-to-open-everything-url-search-bookmarks-in-a-new-tab-with-firefox-3/

af:panelPage how to change "Content here" when I click tab1, tab2, etc.

[I can only find this forum. If you have forums for JSF and/or ADF give me URL.]
Hi.
I don't understand <af:panelPage> and how to change view when I click tabs or items?
I did look at source, docs, and panelPage.jspx, but I still doesn't understand.
I know panelPage have <f:facet name="menu1"> for tabs and <af:menuTabs>
<af:commandMenuItem text="tab 1" action="guide.menuTabs"/> which point to
<navigation-case>
<from-outcome>guide.menuTabs</from-outcome>
<to-view-id>/components/menuTabs.jspx</to-view-id>
<redirect/>
</navigation-case>
but how to stay in same page with different tab view?
I have adf-faces-ea13.zip and I install example components war in Tomcat.
You develop great components!!!!
When I open
http://localhost:8080/adf-faces-demo_ea13/faces/components/panelPage.jspx
and click any tab 1-6 I get new page/view, URL is
http://localhost:8080/adf-faces-demo_ea13/faces/components/menuTabs.jspx.
How can I get new content within same page (panelPage.jspx), only that that tab become selected (blue) and show content for that tab?
Same question for item 1-4?
When I click any item 1-4, view are redirected to
http://localhost:8080/adf-faces-demo_ea13/faces/components/menuList.jspx?
How can I stay in same page but with different "Content here"?
What can I use for "Content here" when I click tabs or items?
Included (f:subview) JSF/JSP pages or you suggest something else?
And what to use with subview:
1)<%@ include file="header.jsp"% >
2)<jsp:include page="header.jsp"/>
3)<c:import url="header.jsp"/>
Regards,
Niksa.

Use the JDeveloper forum for questions about Oracle ADF and JSF.
A link to it is on the right side of the JDeveloper home page http://www.oracle.com/technology/products/jdev

TabNavigator - How to change what happens when a user clicks a tab

I am using a TabNavigator in my Flex application and I'd like
to be able to change what happens when a user clicks a tab on the
TabNavigator. I'd like to be able to handle the click on the tab
myself and stop Flex from perfoming it's default actions. Anyone
have a clue how to do this? Any help would be much appreciated!
Mike

Yeah, in the following code, the changeHandler has an effect
but the click effect does not:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
private function clickHandler():void{
accounts.setStyle("fontSize",20);
stocks.setStyle("fontSize",20);
futures.setStyle("fontSize",20);
private function changeHandler():void{
accounts.setStyle("fontSize",7);
stocks.setStyle("fontSize",7);
futures.setStyle("fontSize",7);
]]>
</mx:Script>
<mx:TabNavigator borderStyle="solid"
click="clickHandler()" change="changeHandler()">
<mx:VBox id="accounts" label="Accounts"
width="300"
height="150">
<mx:Label text="Accounts"/>
</mx:VBox>
<mx:VBox id="stocks" label="Stocks"
width="300"
height="150">
<mx:Label text="Stocks"/>
</mx:VBox>
<mx:VBox id="futures" label="Futures"
width="300"
height="150">
<mx:Label text="Futures"/>
</mx:VBox>
</mx:TabNavigator>
</mx:Application>

How to change download path when using webutil_file_transfer.DB_TO_CLIENT

I am trying to change the path when downloading a file using the download_db procedure (webutil_file_transfer.db_to_client).
Thanks,
Terry

Is the procedure DB_TO_CLIENT built in oracle?
I also want to download video files from Oracle to client and save to d:\video, How can I do?
Appreciate for your any words.
If you know, Plz email to:
[email protected]

How to change row background when the value was changed?

hello expers!!
i need your help...plz help me.
i want my table row(specific) background changes when the user changed the value in a cell. I am able to know that a value in a cell was changed but the problem is i dont know how to change row color background. I've researched over the internet on how to solve this problem but nothing was found.
please see the link to help you visualize what i mean. tnx!
[http://www.flickr.com/photos/28686474@N04/2708299927/]
tnx in advance!! code snippet will be a great help...
Edited by: kagaw3000 on Jul 27, 2008 8:22 PM

final JTable table = new JTable(data, columnNames) {
int lastRowChanged = -1;
@Override
public void tableChanged(TableModelEvent e) {
     super.tableChanged(e);
     lastRowChanged = e.getFirstRow();
     repaint();
@Override
public Component prepareRenderer(TableCellRenderer renderer,
               int rowIndex, int vColIndex) {
Component c = super.prepareRenderer(renderer, rowIndex, vColIndex);
     if (rowIndex == lastRowChanged) {
          c.setBackground(Color.RED);
     } else {
          c.setBackground(getBackground());
     return c;
...........this code will changed background color when data was changed BUT if i changed another data in another row the previous backgound color(RED) will be erase. To make it more clearer, it will only change background color of a row only to one row NOT to multiple rows(that is being edited).

How to change new tab when it won't change

I was able to change my new tab in about:config, and now it won't change! I tried installing an add-on to reset the tabs, but that only reset Firefox! I need help on how to change it.

I have hit reset before, but with no change.

TS2986 How to change volume scheme when I install OS X Mountain lion?

I try to update OS X Mountain Lion after setup boot camp , When I select the disk. The following warning msg occur :
"This disk doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options"
But I c the disk options button is Disable. How to enble it and update OS ?

Flip4Mac is not currently compatible with Mountain Lion. Go to their website and download the latest beta version.

When reflow text; How to change paragraph automatically when changing frame

Hi
Im new to indesign scripts, but thought that this maybe was the right forum to ask the following question. (Im using Adobe Indesign CS.5 )
Im currently trying to import a file (word file / excel both is possible) into an indesign book and formatting the text automatically!
My question is: How is it possible to reflow text into frames and when changing frame it changes paragraph?
I have already figured out how to reflow the text, and actually also managed to relow text into the frames and change paragraph style. I know how to use the keep option, and by this change the paragraph style when e.g. changing frame break/page break etc. (but if the content being flowed-in is not tagged with style names then I cannot figure out how to do it)
The document and its content I whish to import do not have any tagged paragraphs!
If any of you have a hint, I would be more than happy to hear from you

My question is: How is it possible to reflow text into frames and when changing frame it changes paragraph?
This question is not gramatically correct and I cannot understand what you are trying to ask.

How to change file type when exporting a report with a background job

Hi,
I've set up a background job in SM36 to execute a SAP Query I've created, set to send the results as a file to an external email address. When it arrives the file is a .htm (and it seems to cut out after a few pages of data), but I'd like it to export as a .xls, .txt or .csv.
I've checked the job, the query and my user settings, but I can't find where the change the file extension used - can anyone please tell me how to do it?
Thanks,
Tim

Hi Shiva,
Can you please confirm where in SQ01/2 the file path information / settings are?
Thanks,
Tim

How to change Group Asset for one Asset

Hi,
Please how can i change a Group Asset for one Asset ?
i try with Tcode AS02 but i find "Act determination" in grey.
i hope ur help
Regards
Edited by: jehade el aoumari on Jan 22, 2008 11:38 AM
Edited by: jehade el aoumari on Jan 22, 2008 12:35 PM

HI,
In the Depreciation tab, double click on the the Depreciation area, where you want to change the Group Asset. because Group asset is specific to the Depreciation area.
You will see the Group Asset field.
If you still do not see the Group Asset field, then you have to change the Screen Layout in the Customisation for the Depreciation area in T-Code AO21.
Hope this helps you.
Thanks
Siva

How to change icon size when uploading pics?

So I'm uploading pics to facebook, into an album where I'll put multiple pics. The problem is that when I click upload on facebook, and the "upload finder window" comes up, even though I choose icon as the view way, they are at the smallest size, and barely recognizeable.
Note that I'm not talking about a regular finder window. I know how to get those to come to the right size. I have already set my preferences in finder to show all icons at 128x128, but it doesnt seem to affect the browser upload finder... this problem shows up with all browsers too (safari, chrome, firefox)
I'm at my wit's end because I have to upload multiple pictures every two or 3 hours for work, and this is jsut ridiculous.

auwoo wrote:
I just upgraded to iOS 7.0.4. I hate it and wish I could uninstall it. Is there any way to change from the huge icons of 4X4 on screen to old style of 4X5 size?
You cannot.
But how is 4x4 larger than 4x5?

How to Change view qualities when effects panel open?

Open Effects>Stylise>Rounded Corners,
Turn on Preview (BTW how do I make PREVIEW ON! as the default for all effects panels/windows?)
Now I want to Hide the Bounding Box and the Edges... but those shortcuts are now inoperable.
Photoshop allows me to hide bounding box, and the rulers, I think, when having an effect window open, why does Illustrator not permit this?
Is there an alternative other than canceling out and starting again with the view qualities changed?
Seems needlessly long winded to cut off these shortcuts just because an effects settings window/panel is open.

> BTW how do I make PREVIEW ON! as the default for all effects panels/windows?
Basically, you can't. But you can enjoy the Scribble effect that has it on by default.
As for effects and their settings in general, I would appreciate if they were truly integrated in the Appearance palette (not just as a copy of the main Effect menu).
Illustrator still has got too many modal dialogs which hinder doing things like the bounding box example you mentioned.

How to change website assets when...

Similar Messages

Maybe you are looking for