How to change workspace ownership

Hi,
the owner of a beehiveonline workspace left the company. Is there a way to change the ownership for this workspace
or add an administrator?
thanks,
Claudio

Claudio,
If the group sponsor/manager adds another email address to the Group manager's email that user will be added as a coordicnator when the next user is added.
Is the sponsor also the one who left? If so email the details of the group and who has taken over to [email protected] and we can adjust the setup.
Phil

Similar Messages

How to change the ownership of a doc after a specific time in workflow ?

Hi
My objective is to create a workflow in ESO , that will change the ownership of a contract document from the current person to his supervisor ( supervisor's id will be in user id management page) after a specific time .
Please help me how to do it ?
I am using TWE editor for workflow design
Regards
Swastik

To prepare a computer for sale or donation, in addition to the steps mentioned in this support article, take these steps:
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you paid for an upgrade OS X 10.7 or later, you must reinstall the original OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.)
The new owner will have to repurchase the software, if need be, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer them either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

How to change subdiretory ownership?

i am a root user
i want to change one diectory's ownership (also including subdirectory's ownership)
my command is
chown -R newusername:staff directoryname
but subdirectory's ownership is not changed.
how to do this?
thx

It should change the owner ship to the last node, I tried it and it worked, make sure that you are root.
Samir Patel

How to change file ownership/permission on Airport Extreme Time Capsule

I have a 3TB Airport Extreme Time Capsule that currently have a folder with a number of files. The problem is it won't let me delete some of these files because I don't have permission. On a mac it would be trivial to either take ownership or change my permissions. Any ideas on how I can do this on the TC?

niblettes wrote:
I only know what OSX tells me -- so my information is only as good as its messages.
Locked files seem like a good possibility though.
Your first post seemed to say that some specific files couldn't be deleted. If you know any of their names, see if one is locked. if not, that isn't the problem. If it is, unlock it and try to delete. If it still won't delete, that's not the problem, either (or at least not all of it).
How can I just make all file unlocked since I have no idea which of the tens of thousands of file are at fault?
I know in OSX its easy to change permissions on a folder and then propagate that change to all child foders and files. Does locking/unlocking work the same?
If you don't know of any specific files, try creating one, locking it, then seeing if you can delete it.
There doesn't seem to be any way to unlock all files in a folder.
Do you want to delete everything on the TC? If so, just erase it with Airport Utility -- only takes seconds.
EDIT: These files wouldn't be in Time Machine backups, would they? If so, you can only delete entire backups via the Finder, not individual files or folders. But the message OSX usually sends when you try that says so fairly clearly.
Message was edited by: Pondini

How to change Workspace URl in 11.1.2.3 and change the image in login

I recently upgraded to 11.1.2.3 Everything works fine but the Planning Application is not working from the regular URL. We have a custom URL where it does not shows the server name When I try to access it with the regular URL with the server name it works fine. I want to know if there is a way that I can change the URL to custom I want to know if there was a way to change the login image in the workspace This is for Version 11.1.2.3

Check below blog for workspace image change:
http://www.orahyplabs.com/2012/01/customizing-epm-workspace-1112.html
Also, check *mod*.conf file for port number of planning, it will be under ORACLE_INSTANCE/httpconfig/config/OHS/ohs_component.
Hope this resolve your issue!
Cheers!
Sh!va

HT4889 How do change the ownership of files after using the migration assistant?

After I copied all of my files across using the migration assistant, the tool is nice enough to assume that I want to use the same ID that I had on my PC. This is not my case as I am using a different name on the mac. How do I get the files from the other user name? I have already set the sharing permissions so that I can see them on both user ids, however the only way I can see to update is to copy them all. As I have about 1TB of files, this is a little inconvenient. Any thoughts?

Thanks. It got me on the right track. At the end, I copied the 1TB over and just deleted the other profile. I tried to set the ownership to my regular ID by removing the lock from "Get Info" but I still had to move them out of the other "user" folder.

Mass change the ownership of the documents ! Thoughts?

Fellas,
I am looking for some information on how mass change of ownership can happen to following documents in Sourcing:
RFx
MA
Ex: Buyer A is the owner of the documents and he/she is no more with the organization. We would like to mass change the ownership of these documents.
My thoughts:
1. Create a report to pull the documents
2. Script to update the owner
3. Schedule a job, so the script can run and update all the documents.
Thanks
Gummadi

Hi Gummadi,
We had same requirement , change the ownership of Master Agreements.
1. Create a report to pull the list for Agreements to be changed with below columns:
DISPLAY_NAME , CALC_METHOD, UNIQUE_DOC_NAME, DOC_TYPE,
STATUS, CURRENCY, VENDOR, CONTACT, LOCATION,
2. Create workbook for Master Agreements, above fields are mandatory for any Mass Change on MA's.
add DOC_OWNER_USER column to the work book
3. Import this work book to CLM/E-Souring.
Hope this will help you.
Thanks
- Sai

I've bought an used macbook pro and want to change the ownership!

Basically i've purchased on ebay a pre-owned macbook pro that hasn't come with the original OS discs and I don't know how to change the ownership!
I've only have the ebay articule of the auction that I won and my credit card resume where I paid for the item that proofs my ownership on the macbook but nothing else!!
I just want to state somehow legally that this macbook is now mine in case i need apple care assistance or anything else (legal matters).
thanks on advance to the whole community!

pre-owned macbook pro that hasn't come with the original OS discs
Which OS was originally pre-installed? You need this information, in order to receive the proper instructions on how to wipe it clean.
Macs that came with the OS'es 10.6.8 & earlier are not suppose to be sold w/o the DVDs that originally came w/them per Apple's license agreement. If this is the case w/you, then you purchased a glorified door stop. The system DVDs have troubleshooting tools on them and they are machine specific.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

How to change the default workspace polling behaviour

Here are the instructions on how to change the polling interval in workspace:
The workspace source project is usually under (C:\Adobe\Adobe LiveCycle ES2\LiveCycle_ES_SDK\misc\Process_Management\Workspace)
The file that needs to be modified is SessionManager.as and is under (C:\Adobe\Adobe LiveCycle ES2\LiveCycle_ES_SDK\misc\Process_Management\Workspace\ws\Workspace\foundation\src\lc\fou ndation)
Set the value in a javascript file and then read this from the Workspace app. You can see an example of this in the same createChannelSet() method wrt the “enableSmallMessages” variable. To do this:
1- Add the following lines to the workspace-config.js file right after the enableSmallMessages var definition (the js file is in the sdk under (C:\Adobe\Adobe LiveCycle ES2\LiveCycle_ES_SDK\misc\Process_Management\Workspace\ws\Workspace\ui\html-template\js) – note that my example sets it to 10 seconds:
1- Then in the createChannelSet() method, define a new var with the same name and type=Number and default it to 3000 (to be consistent with the current behaviour):
               var pollingInterval:Number = 3000;
2- Then, in the existing block where ExternalInterface.available is true, add the line to read the new value from the js file like this:
              pollingInterval = ExternalInterface.call(“pollingInterval”);
3- Set pollingInterval on the channel with:
             channel.pollingInterval = pollingInterval;
4- Add this function to the workspace-config.js file
      // pollingInterval is the channelset polling interval in millisecs
      function pollingInterval()
            return 10000;
Compile this code and rebuild the workspace war, making sure the war contents contain the updated js file too, and then the polling interval will be read from the js file, making it much easier to change.
Here is the doc on how to customize workspace: http://help.adobe.com/en_US/livecycle/9.0/customizeworkspaceui.pdf

Changing the Workspace Polling intervals just got a whole lot easier. Go to http://blogs.adobe.com/ADEP/2011/08/workspace-polling-in-adep.html for more info.

How to change default workspace in WSAD?

Hi all,
I need ur help? Please tell me How to change the default workspace in WSAD.

the -setworkspace command line arg doesn't show up with that search on my copy of WSAD version 5.0.0.2. We typically have 3 or 4 workspaces running, and of course everybody checked the box the first time out ;)
We did search extensively (google, tech boards, config details, etc), and finally got the arg from a tech call to IBM. If they really want to run a bunch of different workspaces, this is an easy way, but the arg for it wasn't all that easy to find.

How to change the quota of a workspace on OCS10g?

Hi,
How to change the quota of a workspace on OCS10g?
I can't find the site administrator page or workspace administrator page to change the quota of workspaces?
Regards,
Kitae
Message was edited by:
kitaelee

Hi -
Oracle Support has a linux command-line script available under controlled release for customers to perform the following:
1) Modify default quota for all subsequently created Libraries.
2) Modify the quota for a specific Workspace Library.
Customers can file a TAR in Metalink and support will supply the script.
Customers should let their users know to send an email to their Collab Suite Administrator to request additional quota, and then the administrator can run this script.
Please note that this is filed as a bug and a patch is being developed. This script is provided as an interim fix.
Thanks

How to change the clusterware ownership?

Our initial 10g Clusterware install is currently owned by root. As we upgrade to 11g, I would like to change the ownership. The 11g cluster install guide states that ownership cannot be changed during the install, and I cannot find anything in the 10g documentation about changing the ownership. How does one change the clusterware ownership in a 10g installation?

Thanks. As to "why" I want to change the ownership, it is more of a matter of principle. Keep in mind that my cluster experience is rather low, but it seems problematic for a DBA to have so many root responsibilities in an organization (ie, ours) where those responsibilities are clearly delineated in two different groups. What I also found confusing is that the installation guides make reference to a "crs_user", but I was not able to find much supporting documentation for such a user. Is that the preferred way to go, or is that more of a band aid in the lines of a concession?

How to change default window size?

I'm using MX 6.0 on Mac... For some reason I can't figure out
how to change the default window size in the work windows. Every
time I open a new file to work on it opens to a smaller size than
the actual page is. When opening pages dozens of times a day, it
gets annoying to have to resize each time. I'm sure it wasn't
always like this, but I can't figure out how to change it so the
default size that it opens to each time is larger.
Thanks for any help,
DD

Window | Workspace | Save Current
This gives you the opportunity to save a current layout look
that you like
You might also look under
Edit |Preferences | Status bar - but I don't see that this
does anything
in DWCS3

Can't figure out how to change the bottom margins

This is my 3rd day with a mac and I can't figure out how to change the margins in Pages '09 so that it doesn't include a .5 margin on the bottom.
I'm using a HP OfficeJet J6450. In the page setup, I changed the "untitled" user defined margins to .1 for top and sides and 0 for the bottom and it still includes a .5 margin on the bottom. Changing the untitled seems to help side margins.
I've used the inspector to see if there is a setting there that defines the bottom margin as .5 and that doesn't seem to do it.
If I print borderless, the text boxes that I have a .3 border around don't print on the edges even though they show up on my workspace. It also throws off the top and bottom.
This is a big assumption, but I assumed that if the workspace and rules show white space and now grayed out, it would print that way. It's not.
Any ideas? Thanks! Ana
P.S. I've downloaded & installed updates for everything - OS, iWorks, Printer

Peggy,
Maybe this is true of Macs? On my windows systems - I can specify more options on both my printers and can print beyond .5 inches at the bottom. One specific option on my J6450 that I can select is "minimize borders" and it will print about .1 or .2 from the edge. On my mac, I do not have that feature to select. If I print borderless, even though my layout shows it should not go off the paper, once printed it does.
Thanks.

How to change font in CS4

Hello All,
I have just got used to working with Dreamweaver CS3. I
created a template in CS3, and it is quite obvious
how to change the font face for an editable region in CS3
properties area.
I have just moved to CS4, and am editing a template I created
in CS3, and have not (as yet) found out how to select a different
font face for an editable region in CS4, that option seems no
longer on the property section of the workspace. How can I do this?
One more question - less remedial. I have a template with
repeatable and editable regions. It is a table that allows adding
or subtracting images in one cell and text in another. I want the
image tag width and height to always be 200x125 regardless of the
actual size of the image (the images will always be bigger than
200x125). Is there a way to set this in the template? I have set
the table cell to that size, but it expands if I add a larger image
to the table.
Thanks,
eholz1

> I have just moved to CS4, and am editing a template I
created in CS3, and
> have
> not (as yet) found out how to select a different font
face for an editable
> region in CS4, that option seems no longer on the
property section of the
> workspace. How can I do this?
Use the CSS 'button' on the upper, left corner of the
Property inspector.
> One more question - less remedial. I have a template
with repeatable and
> editable regions. It is a table that allows adding or
subtracting images
> in one
> cell and text in another. I want the image tag width and
height to always
> be
> 200x125 regardless of the actual size of the image (the
images will always
> be
> bigger than 200x125). Is there a way to set this in the
template? I have
> set
> the table cell to that size, but it expands if I add a
larger image to the
> table.
This is within an editable region? I can think of no way to
do that.
Sorry.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"eholz1" <[email protected]> wrote in
message
news:[email protected]...
> Hello All,
>
> I have just got used to working with Dreamweaver CS3. I
created a
> template in
> CS3, and it is quite obvious
> how to change the font face for an editable region in
CS3 properties area.
>
> I have just moved to CS4, and am editing a template I
created in CS3, and
> have
> not (as yet) found out how to select a different font
face for an editable
> region in CS4, that option seems no longer on the
property section of the
> workspace. How can I do this?
>
> One more question - less remedial. I have a template
with repeatable and
> editable regions. It is a table that allows adding or
subtracting images
> in one
> cell and text in another. I want the image tag width and
height to always
> be
> 200x125 regardless of the actual size of the image (the
images will always
> be
> bigger than 200x125). Is there a way to set this in the
template? I have
> set
> the table cell to that size, but it expands if I add a
larger image to the
> table.
>
> Thanks,
> eholz1
>

How to change workspace ownership

Similar Messages

Maybe you are looking for