How to change WSDL file in application when switching environments

Hi,
I have a web application that use WSDL as data control. I developed it in DEV environment and want to deploy it in TEST. How can I change the WSDL file, login/password to point to the new environment?
Thank you,

Hi,
Select the DataControl.dcx file and open the Structure Window. Select the WS Data Control entry and choose "Edit Web Service Connection" from the context menu
Frank
Edited by: Frank Nimphius on Nov 6, 2010 11:05 PM

Similar Messages

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

How to upload XML file from Application server.

Hi,
How to upload XML file from Application server.Please tell me as early as possible.
Regards,
Sagar.

Hi,
parameters : p_file type ibipparms-path obligatory.
***DOWNLOAD---->SAP INTO EXCEL
filename1 = p_file.
call function 'GUI_DOWNLOAD'
exporting
BIN_FILESIZE =
 filename = filename1
 filetype = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
 data_tab = it_stock
FIELDNAMES =
exceptions
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 others = 22
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Deepthi.

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

How to rename a file in Application server

Hi All,
Here I have a issue with the present file which is being generated in application server.
Before the completion of the file the EDI tool is extracting the file from the app server.So here I would like to generate the file with a temp name and then rename to the actual file name which EDI recognises and fetches.
Please correct me If I am wrong and let me know how to rename the file in application server.
Thanks,
Vijay N

you can try using unix command , if your application server is unix.
use move command
mv <source> <target>
REPORT ZUNIX line-size 400
 no standard page heading.
data: unixcom like rlgrap-filename.
unixcom = 'mv file1 file2'.
data: begin of tabl occurs 500,
 line(400),
 end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
 id 'TAB' field tabl[].
or else you can open dataset/ read the dataset and move it to another file and delete the old file.

How can I attach files or pictures when reply email?

How can I attach files or pictures when reply to email?

You can't in the present OS. If you'd like to see Apple add that capability, suggest such here:
http://www.apple.com/feedback/iphone.html

How to change pdf files to word

how to change pdf files to word?

Hi Reyesnancy,
Please visit the links mentioned below and purchase the subscription as per your requirement.
http://exportpdf.acrobat.com
https://www.acrobat.com/createpdf/en/home.html
After you puchase the subscription, login with your credentials and use the service for conversion.
Let me know if you have any other question,
Regards,
~Pranav

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How to change tif files to jpg files

how to change tif files to jpg files

Under what circumsatnces?
Preview will convert to jpg-> save as (option key)

How to read WSDL File

Hi all,
I am new in web services...just started yesterday.. my client is provinding web services...I just need to send some data to them and retrieve data back...they are basically verifying addresses..if Address is not corrent then they will send the correct one back..I have no clue which method should I call and how to send data to them..below is my work that I have done so far...please help me...
///Below is the Client API that I have made...there is a bean file which I have made for Input Data...
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class TestClient {
 public static void main(String [] args) {
 try {
 String endpoint = "http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress";
 Service service = new Service();
 Call call = (Call) service.createCall();
 call.setTargetEndpointAddress( new java.net.URL(endpoint) );
 call.setOperationName(new QName("http://m3group101.mnao.net/", "ValidateAddress"));
 call.setUsername("free");
 call.setPassword("account");
 AddressIn addressIn = new AddressIn();
 addressIn.Address1 = "6767 Friars Rd";
 addressIn.Address2 = "";
 addressIn.Address3 = "";
 addressIn.Address4 = "";
 addressIn.City = "SAN DIEGO";
 addressIn.StateProv = "CA";
 addressIn.PostalCode = "";
 addressIn.Country = "US";
 String ret = (String) call.invoke(new Object[] {"",""}); ////Here I donno what should I pass
 System.out.println("Sent DATA, got '" + ret + "'");
 } catch (Exception e) {
 System.err.println("Got Error While retrieving data "+e.toString());
///My Bean File Looks like this....
import java.io.*;
import java.util.*;
import java.util.ResourceBundle;
public class AddressIn {
 public String KeyValue;
 public String Address1;
 public String Address2;
 public String Address3;
 public String Address4;
 public String City;
 public String StateProv;
 public String PostalCode;
 public String Country;
 public AddressIn()
 KeyValue = "";
 Address1 = "";
 Address2 = "";
 Address3 = "";
 Address4 = "";
 City = "";
 StateProv = "";
 PostalCode = "";
 Country = "";
 } // END constructor
} // END class AddressIn
import java.io.*;
import java.util.*;
import java.util.ResourceBundle;
public class AddressOut {
 public String KeyValue;
 public String Address1;
 public String Address2;
 public String Address3;
 public String Address4;
 public String City;
 public String StateProv;
 public String PostalCodeBase;
 public String PostalCodeAddOn;
 public String Country;
 public String Status;
 public String StatusCode;
 public String StatusDescription;
 public String Confidence;
 public String RecordType;
 public AddressOut()
 KeyValue = "";
 Address1 = "";
 Address2 = "";
 Address3 = "";
 Address4 = "";
 City = "";
 StateProv = "";
 PostalCodeBase = "";
 PostalCodeAddOn = "";
 Country = "";
 Status = "";
 StatusCode = "";
 StatusDescription = "";
 Confidence = "";
 RecordType = "";
 } // END constructor
} // END class AddressInPlease see the WSDL File...
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns:intf="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="http://com.g1.dcg/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsd00="http://www.w3.org/2000/10/XMLSchema" xmlns:xsd99="http://www.w3.org/1999/XMLSchema">
- <wsdl:types>
- <schema targetNamespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
- <complexType name="ArrayOf_xsd_anyType">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:anyType[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ArrayOf_tns1_ServiceOption">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="tns1:ServiceOption[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ArrayOf_tns1_DataRow">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="tns1:DataRow[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ArrayOf_xsd_string">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:string[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
</schema>
- <schema targetNamespace="http://com.g1.dcg/services" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
- <complexType name="ServiceOption">
- <sequence>
<element name="key" nillable="true" type="xsd:string" />
<element name="value" nillable="true" type="xsd:string" />
</sequence>
</complexType>
- <complexType name="DataTableBean">
- <sequence>
<element name="columnNames" nillable="false" type="impl:ArrayOf_xsd_string" />
<element name="dataRows" nillable="true" type="impl:ArrayOf_tns1_DataRow" />
</sequence>
</complexType>
- <complexType name="DataRow">
- <sequence>
<element name="values" nillable="true" type="impl:ArrayOf_xsd_string" />
</sequence>
</complexType>
</schema>
</wsdl:types>
- <wsdl:message name="processResponse">
<wsdl:part name="arg0" type="tns1:DataTableBean" />
</wsdl:message>
- <wsdl:message name="processRequest">
<wsdl:part name="arg0" type="impl:ArrayOf_tns1_ServiceOption" />
<wsdl:part name="arg1" type="tns1:DataTableBean" />
</wsdl:message>
- <wsdl:portType name="G1Service">
- <wsdl:operation name="process" parameterOrder="arg0 arg1">
<wsdl:input message="impl:processRequest" name="processRequest" />
<wsdl:output message="impl:processResponse" name="processResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ValidateAddressSoapBinding" type="impl:G1Service">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="process">
<wsdlsoap:operation soapAction="ValidateAddress" />
- <wsdl:input name="processRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" use="encoded" />
</wsdl:input>
- <wsdl:output name="processResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ValidateAddress">
- <wsdl:port binding="impl:ValidateAddressSoapBinding" name="ValidateAddress">
<wsdlsoap:address location="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>I am receiving Exception " No Such Operation "
I am sorry but I don'n know how to read WSDL file...
thanks
Vish...
Message was edited by:
vishu007

Start going through the tutorials that come with Axis (you didn't state which version of Axis you're using btw, and there are major differences between them).
Anyway, the wsdl you list doesn't have an operation called "ValidateAddress". It has only one operation, called "process".
The call takes 2 arguments, as defined in the input message, and returns one value as defined in the output message.
Had you used Axis to generate your classes for you that would all have become quite obvious.

How to change the file name of pdf file in html page?

Hi,
Actually my requirement is to upload 50 PDF files containing javascript in each file into flex page with the help of one html page.
i did the the javascript part by using batch processing.
now i want to call those pdf files one after another without changing the file name in html page
the code written in html page is
<html>
 <body>
 <object id="PDFObj"
 data="http:\\localhost\pdf\20090807 - Batch 630.pdf"
 type="application/pdf"
 width="100%"
 height="100%">
 </object>
 </body>
</html>
So every time i have to change that file name to acess another file.
Is there is any other way to sort this problem????
Plz anyone help me to sort out this problem with some code or some example.

I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's". What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix). You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code. You will have a list of 50 links. If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters. One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script. Again, I don't know how it works. I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

Can someone tell me how to change obj file in the applet

Thanks in advance.
I have try to use the ObjLoad example in the java3d demo to
change the obj file.But I fail to do this.
I had use twe applet,one to change name,and then refresh the other
frame to try to relod th obj file. but
java.lang.NullPointerException
at ObjLoad.init(ObjLoad.java:150)
at sun.applet.AppletPanel.run(AppletPanel.java:348)
at java.lang.Thread.run(Thread.java:536)
can you help me?
thanks

Sun's Java3d FlyThrough Demo & Java3d Scenegraph Editor
allow you to load mutiple 3d files (sequencially) including VRML
files with the Sun VRML Loaders at run-time
-- and the Java Source Code is free --- ( see below )
First, try a Web Demo of the "Appearance Explorer" :
"Appearance Explorer" Java3d Web Applet, Loads multiple ".obj"
http://web3dbooks.com/java3d/jumpstart/AppearanceExplorer.html
- click on "Data"
- click on "Obj File: Galleon" -- or -- "Obj File: Beethoven"
- rinse, rather, repeat.
|
http://web3dbooks.com/java3d/jumpstart/Java3DExplorer.html
http://web3dbooks.com/java3d/jumpstart/J3DJumpStart.zip
| ^-- free source code
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
| Sun's Java3d Scenegraph Editor showing a Nasa VRML model
| --------------------------------------------------------
|
| uses the Sun VRML Loaders, source code available and is free.
|
| [ at this url: ] http://java3d.netbeans.org/j3deditor_intro.html
|
http://www.frontiernet.net/~imaging/terrain_rendering.html#Scenegraph_Editor
http://www.frontiernet.net/~imaging/terrain_rendering.html
Selman wrote a Java3d book that was well received
and has a Swingtest.java applet and application that
allows you to load objects dynamically,
ie. "change" the viewed object when it is running by
allowing the user to select "sphere" or "cube" from
menu lists ( in this case it's not just displaying
Jav3d primative objects, but it has the core functionality
of deleteing and adding nodes in the scene graph that you
are seeking, and at that point the rest is left as
exercise to the student. The ObjLoad.java in Sun's Demos
directory has the code to load ".obj" files, so you have
all the tools you need.
| Picking of VRML objects with your mouse is demonstrated
| in a new book, Java 3D Programming, by Daniel Selman
| ( shown on the left ).
|
| The source code is avaible for free.
|
| [ here: ] http://www.manning.com/selman/selman_source.zip
|
| This new book uses the old, reliable Sun VRML Loaders for Java3d.
|
| The program reads a 3d scene as a simple VRML text file,
| and displays the Java3d Scene Graph ( which is interactive,
| you can expand and collapse the branches of the scenegraph
| and examine the contents of the nodes ), it renders the
| 3d scene, and when you click on an object it tells you
| what you clicked on.
|
| You can see ( and download ) the Java Source code of
| the operative file: VrmlPickingTest.java
|
| The publisher's site has more informatation on the book.
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
http://www.frontiernet.net/~imaging/sourcecode/VrmlPickingTest.java
The Prentice-Hall books by Aaron Walsh are false & fraudulent
in their claims to present the most current methods, as a part
of the "Couch-Beiter Flame War" and fraud involving Sandy Ressler
at the NIST. Prentice-Hall, Yumetech.com and Aaron Walsh have
misrepresented and disparaged the old & reliable Sun VRML Loaders
in favor of the "new" Yumetech.com Loader, and the web demo above
__ DOES NOT __ load Web3d.org's __ VRML __ files, only the less
capable ".obj" files ... so the "Web3d" series of books from Prentice-Hall
does not show the loading of ___ Web3d.org 's ___ VRML __ files
because Sun's VRML Loaders were the best ones, and the Yumetech.com
folks didn't want anyone using those, and started the "Couch-Beitler Flame War"
to disparage, falsely & fraudulently misrepresent the facts and knowingly
published false and misleading "disinformation" in the
unreliable Prentice-Hall / Pearson Ed books, harming our community.
The Sun VRML Loaders are used by __ Nasa, __
the NSF supported Virtual Chemistry Lab ( "Lab3d" ),
me, and others simply choosing the "what works best",
and by people using Sun's Java3d FlyThrough & Java Scenegraph Editor.
symsan wrote:
|
| Thanks a lot,but can you give some code
| about to change the Obj file or vrml file,
| when the user in the browser to choose
| the file or input to the textField ?
|
I misunderstood the original question ( it was too terse ).
I interpreted the question has how to change the loaded
objects --- between successive runs of the program ---
and not as you intended -- dynamicall while running
the program program without quiting & restarting.
In a "Java3d" forum I'm not going to wander into
how basic ( non-Java3d) 2d commonents such as TextFields
are programmed.
The original Vrml97Player.java file that came with
Sun VRML Loaders also implemented the functionality
of loading mulitiple files ( sequentically during one run )
and I have worked with that and similar things with
the Shout3d.com engine and my own 3d Java engines.
-- Paul, Java Developer & Web Animator
Imaging the Imagined: Modeling with Math & a Keyboard

How to isolate media files in Applications from video uploaders within FMS

Hello,
We have linux-centos with FMS 3.5.2, apache is on another server.
We host media files within applications folders.
The media files are uploaded via ssh by different users, each one populating her own my_app/streams.
the problem:
We do not want the users to be able to see/download one another files while connected via ssh.
This is difficult because of the user/group needed by FMS.
We tried several hours changing groups/users without finding a solution.
Either FMS cannot stream or a user can see/download elsewhere than in her my_app/stream
(to explain a bit better, I hope, a view of a situation where it does stream, but also leave media files accessible to useradm2)
FMS is run by fmsuser:fmsgrp
user1 uid:gid is usr1adm:fmsgrp
user2 usi:gig is usr2adm:fmsgrp
[root@my_serv ~]# tree -gup /home/sanmultimedia/applications/testaccess/
/home/sanmultimedia/applications/testaccess/
|-- [-rw-r----- fmsuser fmsgrp   ] main.asc
`-- [drwxr-sr-x usr1adm fmsgrp   ] streams
    `-- [drwxr-sr-x usr1adm fmsgrp   ] video
        |-- [-rwxr-x--- usr1adm fmsgrp   ] SomaFM--4.mp3
        |-- [-rwxr-x--- usr1adm fmsgrp   ] testaccess1.flv
        |-- [-rwxr-x--- usr1adm fmsgrp   ] testaccess1_1000kbps.f4v
        |-- [-rwxr-x--- usr1adm fmsgrp   ] testaccess1_1500kbps.f4v
        |-- [-rwxr-x--- usr1adm fmsgrp   ] testaccess1_150kbps.f4v
        |-- [-rwxr-x--- usr1adm fmsgrp   ] testaccess1_500kbps.f4v
        `-- [-rwxr-x--- usr1adm fmsgrp   ] testaccess1_700kbps.f4v
Does anyone has a hint ?
Fred

VOD changes won't help him, he said outside the applications
folder. According to adobe any new vod folders must be in the
applications folder, hence virtually worthless for most purposes. A
better question may be, how do you specify a folder on a different
local hard drive. I wish adobe wouldn't make it so complicated, it
should be a really simple matter.

How to change font-size of application menu

I want to change font-size of application menu. How?

Hi,
To change the font size of the Application menu, you need to change main.css file.
at 'body, td, input, select, textarea' class.
For more detail about main.css, please refer Bookshelf
Siebel Developer's Reference at [8 Cascading Style Sheets].
Regards,
Joseph Arul Dass

How to change report displayname at runtime when run from the report server?

hi all,
with the reportviewer widget in a winforms app, i'm able to change report displayname at runtime by handling thesubmittingparametervalues event like so:
        private void reportViewer1_SubmittingParameterValues(object sender, ReportParametersEventArgs e)
            string po = e.Parameters["Order"].Values[0];
            this.reportViewer1.ServerReport.DisplayName = "Load Out - " + po + " - " + DateTime.Now.ToShortDateString();
question: how do i achieve the same thing when the report is run via the ssrs reportserver website?
thanks for any tips,
sff

Hi sherifffruitfly2,
According to your description, you want to change the display name of report in Report Manager. Right?
In Reporting Services, we can't make the report file name dynamically. But we have Build-in Fields to show report name and execution time in a report. We can add a textbox and put in the expression below:
="Load on- "+Globals!ReportName+" "+Globals!ExecutionTime
It will show the report name with execution time when we run the report:
Reference:
Built-in Collections in Expressions (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to change WSDL file in application when switching environments

Similar Messages

Maybe you are looking for