How to changing host name

how do i changing host name after install. it never asked me for one and now its stuck on unknown.

Recent forum threads have started like this one,
then got completely out-of-focus and derailed.
e.g.
http://forum.sun.com/jive/thread.jspa?threadID=106335 from Sept '06,
which references a thread from Aug '06, with 80+ replies inside it ...
http://forum.sun.com/jive/thread.jspa?threadID=105923
Your Ethernet connection and your system hostname are not going to work,
if you don't have a compatible network adapter.
You won't connect to anything, and the OS can't associate its FQDN,
without hardware that works.
Have you reviewed the HCL, and compared it with your hardware?
http://www.sun.com/bigadmin/hcl/
You may need to install 3rd party drivers for the NIC,
or you may need to buy a replacement card that is compatible.
Boot the system. From a terminal window, as root user, do ...
# ifconfig -a <enter>
Does the output from that command list anything in addition to the virtual loopback adapter?
Copy and paste the complete output back here into the forum thread,
so that others can see what you are seeing.
If the loopback LO0 is all you have, then you're going to have to fix that
before going any further in this discussion.

Similar Messages

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change HOST Name without a reinstall in XI 3.1 ?

Is it possible to change the host name in XI 3.1 without reinstall ?

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change host name

HI All,
In the em console , all the urls hostnames are invalid , So the URLs are not working proerly.
ex:
http://*2002:4b90:1bf3:16:b43a:e855:c778:a869*:9001/wsm-pm
How to change this hostname in em ? Please help me ot this issue.
Thanks
Govindan P

hi Govindan,
You can use virtual hosting for changing the hostname.
Regards
Fabian

How to change host name entry for java instance using config tool

Hi Gurus,
We are trying to invoke DR for dual stack SAP PI system.Strategy followed is BR Tool backup and restore method.
We are able bring up ABAP stack and it is still pointing to production Java stack.
Could any one please guide us with step by step procedure to change entries and bringing up java stack for DR system.
While bringing up java instance we are facing below issues
From starting framework it goes back to collecting data stack.
Thanks,
Avadhesh Sharma
+91-8095226536

Hi Avadhesh,
For dual stack systems backup/restore method is not recommended procedure for DR.
As it will have hostnames from Production.
Good approach will be to have export of Production Java stack and import the same into DR OR
Have the DR system installed using virtual hostnames which are similar to Production hostname.
When DR needs to be operational enable these virtual hostnames.
Hope this helps.
Regards,
Deepak Kori

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

How to change the name of a BADI Implementation?

Hello experts,
Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
Thanks in advance,
AK

Hi,
Please go to transaction SE19, enter your implementation name.
Then go to menu: Implementation -> Rename -> ...
Regards,
Ferry Lianto

How to change you name in iCloud

My dad regestard my iPad onto his name then I had to change my name on iCloud because when I send email on my iCloud email address it says Philip on it. I don't want people to laugh at me so I changed it my name now my dad got me an iPhone and he regestered it on his name and in my iCloud email it says Philip instead of sofia I want my iCloud email address to have my name on it not my dad's I can't remember how to change the name. Please tell me or I will never use my iCloud email address ever again.

I have the same problem, and I trued doing what you did and change my name but it still doesn't say my name(I'm a girl and the name is a guy's)

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

Changing Host Name in OCS 10.1.2

I have Installed OCS 10.1.2 on RedHat Linux AS 4.5 (x86) on HP-Proliant DL 180 G5 Server.
I want to configure Apache Server in OCS to launch a web site.
Can anybody guide me with the Apache Configuration,
I have tried but as my site name and Host Name are same i am unable to do it -
Is it possible to change the HOSTNAME on OCS ?
Some guidence on this issue will help me to proceed else i will have to re-install OCS.

Do changing host name effect in google PR update ?

How to change datasource name based on the partition in configplan

Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?

If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar

How to changing host name

Similar Messages

Maybe you are looking for