How-To Changing Page Size in iAuthor

Hi,
is there a possibility to change the page size of an iAuthor iBook? I would like to create one which has the same dimension in portrait and landscape mode because the original paper book ist published in this way (of course I know, that I will get empty space when turning the iPad in portrait mode).
Thanks, Tom

Yes, Since you can't change the actual size of the ipad, technically you can't have a square page on the ipad.
This is the best you can do,
When i look at the Yellow Submarine book on my ipad this is how it looks. (with space on top and bottom)
(screen capture below.)
So that is what I was suggesting.
If you want the square book spread to fill the full height you will have part of one of the pages cropped off.
(748 x 2 = 1496)
472 pixels will be cropped off.
this is also how the YS book works, (ugly in my opinion) this is not possible in IBA.

Similar Messages

XI Pro: How to change page size?

I have a letter-sized document where each page has extremely large margins and text in a tiny font size. Can I use the 'Remove White Margins' function (Crop pages > Set Page Boxes) to remove the large margins and then resize what remains back to 8.5" x11" using the 'Change Page Size' function?
When I try this, I can do the first step and I'm left with pages about 5.5"x8". But the Change Page Size function does not allow me to resize the page.
It this possible?

Hi J Kart,
Please refer the doc: https://acrobatusers.com/tutorials/how-to-resize-pages-in-a-pdf-file
Regards,
Rave

Book Module - how to change page size?

I'd like to design book pages for my existing hard covers - A4 landscape and portrait. Also for specific 12x12 cover which takes 11.69" x 12" paper.
Have watched various YouTubes, search within support - but haven't found a reference to add preferred sizes. Yet.
Can anyone help on this one please?

Yep, that's how I am doing it. I just wanted to make sure that I was doing it correctly. I need to keep debugging then and figure out what the real problem is. I am new to all of this (obviously) and I just needed to make sure I had the idea correct. I didn't mean to use document and page interchangeably, I understand that you can't have different size pages in the same document.
Thank you for your help.
[FYI]I created a class that creates a document with most of the document settings that I use (e.g. a standard number of pages, non-facing pages, units in inches, etc.) but I don't specify a page size, that's something that varies between documents, so I figured I could just apply that after I have created the page. The problem is, when I try to create multiple documents it doesn't work. The script will create the first document using the default page size settings and I can't get it to change the page size, but then the next document will be created using the page size I tried to apply from the previous document that the script created. I am sure this is totally a coding error somewhere else. I will try to track it down. Just when I think I have this stuff figured out . . .

HOW TO: Change page size after page is created?

Is there a way to change the size of a page after the page has been created? In the documentation, the only way I have seen to set the page size is in a "with" statement right after creating the document. I have need to change the size of the document after a document has already been created. Any ideas?

Yep, that's how I am doing it. I just wanted to make sure that I was doing it correctly. I need to keep debugging then and figure out what the real problem is. I am new to all of this (obviously) and I just needed to make sure I had the idea correct. I didn't mean to use document and page interchangeably, I understand that you can't have different size pages in the same document.
Thank you for your help.
[FYI]I created a class that creates a document with most of the document settings that I use (e.g. a standard number of pages, non-facing pages, units in inches, etc.) but I don't specify a page size, that's something that varies between documents, so I figured I could just apply that after I have created the page. The problem is, when I try to create multiple documents it doesn't work. The script will create the first document using the default page size settings and I can't get it to change the page size, but then the next document will be created using the page size I tried to apply from the previous document that the script created. I am sure this is totally a coding error somewhere else. I will try to track it down. Just when I think I have this stuff figured out . . .

How to change page size from A5 to A4 in CS3

How do I change the pagesize of my booklet from A5 to A4 - basically I just want to blow the whole thing up a notch...
I've tried to activate automatic layout adjust and then changing document settings but the result is scattered objects that are still the same size as on A5 - too small and strangely placed...
What do I do?

A fast trick is to export the document to PDF and then place this into a new A4 document, scaled up to fit the page.[*]
InDesign can resize most stuff, but you will still get tiny differences in the text because of spacing, uneven rounding, etc. Layout Adjustment is meant as a shortcut to change margins in an existing document; but it's by no means perfect. It does not
i scale
text or images; it changes the margins and placement of objects only.
[*] With CS3, you can try placing the original CS3 document into a new one (as images). That would make corrections a bit easier.

How to change page size to generate PDF ?

Hi,
I just finished a document : 4 pages on A4 format with texts and images.
I now have to generate a pdf file to send to the printer.... but the staff decided to change the format to a 80% of the initial size. I have to generate the pdf to the right size and I don't really know how to do it.
On the second hand, I have a question about the jpg images imported in my document. The printing company asked me to be sure to have CMJN pics. As far as i know, jpg is RVB. Does the pdf export make the change ?
thanks in advance.

isachrislisa,
In Preview you may Print to a reduced scale, and the medium you print to can be another PDF.
The color space question is an odd one, it seems to me, since I would think your printer should be the one to make such corrections. Without advanced graphics editing software, if would be difficult for you to transform your JPEGs from RGB to CMYK. A more reasonable request might be to keep all the photos and graphics in RGB so the printer has only color space to deal with converting. I'm sure that given some time, the commercial printing experts will jump in here with some better advice.
Jerry

How to change page size by default

Hi, I'm sorry if this has been aswered before - I looked for a solution but couldn't find one.
The problem is I use Pages in French on a localized French Canadian G5. By default, new documents in Pages are set to A4 format, a eurpoean standard. I want it to be set at US Letter, a North America standard. The Printer and Fax System Prefs are set to US Letter and usually other apps behave accordingly, but Pages seems to be reluctant to do so. Any idea ?
Thanks,
iMac G5 20 Mac OS X (10.4.7) 2 Gig RAM

Hello Christian,
have a look inside of the Pages app folder. Do that with the controll key pressed and a mouse-click on the Pages app icon. Choose the item "Show Package Contents" and a new Finder window will open. Now navigate through "Contents > Resources > English.lproj > Templates". There are two folders: "ISO" is holding the DIN templates and "Traditional" is holding the size you need. You can do four things:
1) Rename the two folders, so "Traditional" is named "ISO" an vice versa.
2) Move the "ISO" folder to a place you can remember if you need a DIN Template one day.
3) Delete the "ISO" folder if you only need the "Traditional" templates.
4) If you only need the "Empty" template, than create a link of the "Traditional > Blank > Blank.template" on your Finder, so you have it always at hand with a "single double-click".

How We Can Change Page Size During Report Run Time

Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
null

hello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp

How to change font size on screen

how to change font size on screen

I'm not certain what font sizes you wish to change, when on a page you can use command and the += button to zoom in and make the fonts larger. On the finder desktop you can make what ever is on the desktop larger or smaller from the finder menu click view, custom view options, and adjust the icon size with the slider on the top, and the text using the text size box to select the size that your comfortable with.
Forgot to add these.
http://support.apple.com/kb/PH10876
http://support.apple.com/kb/PH10877
Hope this helps.

How to change Font Size of Object Explorer in "SQL Server Management Studio"

Dear Team,
"SQL Server Management Studio" is a fantastic IDE for the database.
There are so many customization options available but one thing many users missing is that " How to change Font Size of Object Explorer?"
Can you please accumulate this feature in IDE ASAP?
Many Thanks,
Bhavesh

Its there
Go to Tools -> Options
Then under Environment you've fonts and colors tab where you can specify a higher font size.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to change font size in check printing program in AP Invoice

I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand

*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to calculate Page Size that allows for Trim Marks?

I have made a Word document in 4.75" x 7' Page Size and the print company is demanding they have Trim Marks so they can
cut the document to the precise size.
I went to Save As in the Word doc and converted the Word doc to PDF, no problem.
Then I found how to insert Trim Marks onto the PDF using Adobe Pro 9.
The Trim Marks are L shaped but with the 90 degree corner bit missing so they look like 2 straight lines that would tell the
print company where the sides and the top and the bottom are to be cut if the 2 lines were extended to the intersection of the L.
Something like this for Top Left _I and this for the Top Right I_ and the mirror of those two for the bottom Trim Marks -
However when I use Acrobat Pro 9 to insert Trim Marks on a 4.75" x 7' Page Size, the Trim Marks themselves encroach on
the print area by about 9 mm or just under 0.375" because they are marking the corner of the page but it reduces the Page Size
by about 9 mm or just under 0.375" if I leave them there, ie, by the length of the Trim Marks themselves.
Is there a way to position Trim Marks where I want them?
If not then I presume I need to make my original Page Size bigger by the length of the Trim Marks all round?
If I need to up my original Page Size to accommodate the Trim Marks I need to know the exact length of the Trim Marks don't I?
Other wise if I get the length of the Trim Marks wrong they could either encroach slightly on the printed area or denote the
wrong Page Size.
Or perhaps I've got it wrong and it's not the 90 degree intersection that marks the Page Size but rather it is the other ends of the
Trim Marks where the Trim Marks touch the border of the 4.75" x 7' Page Size that denotes the Trim Size?
But that would mean the Trim Marks do not show up on the Camera Ready page and are not seen after printing but somehow I
don't think that's the case.
The attachment is a screen shot showing the Trim Marks on my 4.75" x 7' Page Size PDF.
Help would be very much appreciated.

Go to the Crop Pages command first and choose a page size bigger than the one you want. In Acrobat 8 it is at the bottom of the dialog box where it says change page sizes. Make sure to select for all the pages you want to have crops for. This will make the pages larger, but still no trim marks yet.
Next to to Advanced, Print Production, Add Printer Marks, choose trim marks. Make sure you have selected all the pages you wanted the trim marks to appear on. The trim marks will appear on your pages.
Kinda reverse of what you'd expect, but it will do it.
By the way this needs Acrobat Pro, not Reader.
Tom

How to make page size %100?

Hi everyone,
I am asking for you help how to change the size of page (artboard)
I want to design a photography portfolio, and when website is opened, I want sizes of entire page to be %100 width and height, like in http://sisila.dphoto.com
Does the software only allows us to generate pages like 600x800 or let me say 400x500?
thanks in advance

Hi!
Nowadays, i think is not possible without importing the catalyst project in Flash Builder and editing the code. Please, correct me if I'm wrong.
Gabri <U>

Hello ! how to change document sizes and use our own size (not A3, A2 ...) thank you !

hello ! how to change document sizes and use our own size (not A3, A2 ...) thank you !

Experiment. No harm in trying.
If you are just starting to use Pages you need to make your own assessment given current events whether committing your work to a format and software given this support is a wise move.
You also need to look at what will produce workable results. Particularly if your large posters are to be commercially printed and contain large bitmap (photographic) images.
Always work backwards from your output. Ask your printer what they require to do their job.
Peter

How-To Changing Page Size in iAuthor

Similar Messages

Maybe you are looking for