How to charge Iphone with Windows 2000 (win2k)

Ive found a workaround to get charging working on my work laptop, which is a windows 2000 dell latitude d600.
(1) You'll need administrator rights.... Connect your Iphone to a USB2.0 port
(2) Select Add/remove Hardware
(3) Choose not to windows update or cd/floppy.
(4) Select Advanced and choose OTHER DEVICE in the add/remove wizard.
(5) Select ACER in the helft hand pane
(6) Now choose ACER Handheld in the right hand pane
(7) Simply select OK and windows will install the drivers.
Your done, unplug your apple iphone cable at the USB port and re-connect...It will now happily charge.
Hope this helps
Screenshots available at www.fixyouriphone.co.nr
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Message was edited by: Host

See this doc http://discussions.apple.com/docs/DOC-3141 syncing to a new computer.
you can also backup your phone to icloud http://support.apple.com/kb/HT4859
pics should be imported to your computer as you would a digital camera http://support.apple.com/kb/HT4083

Similar Messages

  • I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.

    I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.

    You cannot drag pics from computer to iphone.  This has never been a feature of iphone.
    You sync them as you would anything esle.
    You select photos from the photos tab.  Whatever is selected will be on your iphone.  Anything not selected will not be. Make sure that everything you want on your iphone is selected, then sync.

  • TS1347 How do I sync with windows mail contacts with my iPhone 4S?

    How do I sync with windows mail contacts with my iPhone 4S?  I want to move my email contact information from Windows Mail to my iPhone 4S

    You don't need Outlook to sync contacts. You do have Windows Contacts available which is a supported address book application for syncing contacts with the iPhone.
    Windows Live Mail is not an email client. Windows Live Mail is an email account that can be accessed via webmail access using a browser or with an email client such as with Outlook or Windows Mail on a PC.
    You can export your Windows Live Mail contacts from your Windows Live Mail online address book for import into the Windows Contacts address book application on your PC which is supported for syncing contacts with your iPhone.

  • Is it possible to charge Ipod5G in Windows 2000 after ejecting from Itunes?

    Is it possible to charge Ipod5G in Windows 2000 after ejecting from Itunes? but keeping it connected? I'm using a fairly powerful and new computer at work...loaded with Win2K (2000), and for some reason it doesnt want to charge once I've ejected it from Itunes.
    My home computer with Windows XP works fine with this, I can eject, but keep it connected so it charges while i watch videos, or listen to music.
    Can anyone help?
    also...the computer at work does have USB 2, and can charge properly...but only if the ipods screen says "DO NOT DISCONNECT"
    Thanks folks!

    I have the same problem and the cause is with Windows 2000. My pc has USB 2.0 and no hardware problems either with the computer, ipod or cables. Basically Windows seems to be shutting down the power for the USB port as soon as Itunes completes its update every time. So the ipod gets a charge for a minute or two and that's it.
    I have just been using another pc for the charge which is annoying - haven't found a solution yet although fiddling with the settings so that itunes is only started up manually may be a good workaround.
    Other people have had the same problem in Win 2k with other models -
    http://forums.ipodlounge.com/archive/topic/108867-1.html

  • Working with Windows 2000 ?

    Hello, I'm new to Java but been programming 15 years, hell knows why I waited till now to use Java but it is great !
    I want to write some applications that control and work with Windows 2000. I realise they would not be platform independent but is this sort of thing possible ?
    or .... just as an example what if I wanted to control some feature of the linux os ?
    thanks
    C

    It is possible. All you need to know is how to use JNI. I think there are only two books out there about JNI, I would recommend the one from Sun.
    You can download it here: http://java.sun.com/docs/books/jni/index.html

  • Is the JDK (1.2.2) compatible with Windows 2000 Pro?

    Hi Friends!,
    It seems that the JDK - Version: 1.2.2 - is not
    compatible with Windows 2000 Pro. I know
    how to configure the kit in this operating system
    even if I'am not able to understand the reason for which
    I receive the error in the Command Prompt window - the JAVAC
    utility says:
    "Can't read: BigDebt.java - 1 error".
    I have added the following command line from
    the System Control Panel->System->Environment->System Variables:
    C:\jdk1.2.2\bin ( where I have installed the kit ).
    I also have added the CLASSPATH command line there:
    set CLASSPATH=.;C:\jdk1.2.2\lib\tools.jar but the problem persists
    and I'am unable to create the BigDebt.class file.
    To avoid another nervous wreck please send me the instructions
    to configure correctly the JDK (1.2.2) for Windows 2000 Pro.
    Thanks.
    Julian Jerman - from Italy.

    when you runs the java compiler like this
    javac BigDebt.java
    You need to be in the directory of your BigDebt.java file located.
    BTW, it is kind of weird that your java file is saved to System32 directory, there is no benefit doing that.
    --lichu                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Default Strata navigation buttons used to have colors besides blue with Windows 2000.

    I recently moved from Windows 2000 to Windows 7 and noticed that the default Strata navigation buttons are now all blue. For example, with Windows 2000 the stop "X" was red and the "Forward" and "Back" arrow buttons were green. No biggie, but is there any way to get these colors with the default navigation buttons in Windows 7?
    Thanks!

    Hello and thank you for the reply!
    While I am waiting for the issue to start up again, I'd just like to cover some things you mentioned in your post. :)
    I only updated the bios because I was originally experiencing these issues. It was a method to hopefully resolve them, which did not work. I was very careful, and the process was a success. I updated to the most recent recommended driver for my motherboard
    from the manufacturers.
    As for Auslogics Boost Speed, it is not running on my computer, as it is a piece of software I only have used to clean junk files (cache/temp) for a very long time now with no issue. I have also tried updating all of my drivers with success, however that
    did not solve the issue either. I even rolled back my network card driver just in case with no luck.
    I have not thought of disabling my audio driver yet, being how it effects far more than just my audio when it happens. My mouse is jittery/laggy as well when no sound is playing. But other tests have shown that it may be a network issue. Next time it happens
    I'll temporary disable my network drivers to see if that causes the issue to clear up.
    I will be sure to mark answers which help appropriately. Thanks again! I should return with the information requested from Zigzag's wiki within 2 days of on-time, when this happens again. 

  • Msi GeForce 4 4200 frame rate locked at 60 with Windows 2000

    Lost here..... I have an MSI Geforce 4 4200 120MB Video Card slotted on an Asus A7V motherboard - AMD Thunderbird 1Ghz processor with 640mb of ram.
    There is a common problem with the Nvidia chip and Windows 2000 in regards to a lock frame rate at 60fps within games.
    I've tried several programs to fix this i.e. "Refresh Lock", "Windows 2000/XP Nvidia Refresh rate lock", "PowerStrip 3.15" and "NVFresh Tool 1.0"
    But nothing seems to work. I'm sure these program work with older Nvidia cards but not with GeForce 4.
    Any Ideas? I even turned the Vsync off and on.
    HELP!

    p-fulla, I'm not to sure about your system and Windows XP but check out these tweeking sites.
    GEFORCEZONE.COM
    http://www.geforcezone.com/
    and
    TWEAKED.NET
    http://www.tweak3d.net/
    TECHTV.COM/SCREENSAVERS
    http://www.techtv.com/screensavers/
    (A little advice: If you can, dump XP and install a copy of Windows 2000 second edition. They both have the same KERNAL but I find that Win 2000 is much more compatible for now. I give XP 2 more years before it's the OS for all. I've reinstalled 6 systems with Windows 2000 because of compatibility problems.)

  • How to share files with windows xp

    how to share files with windows xp

    stephenfromdagenaham wrote:
    how to share files with windows xp
    If you mean just moving files between a Mac and a PC with XP on it, get a USB flash drive, format it FAT32 (they usually come that way) and copy the files to that drive.

  • Install oracle 8.0.6 with Windows 2000

    hello all,
    today we have oracle 8.0.6 on NT Server ...
    we need install the same release oracle 8.0.6 on new IBM server, with Windows 2000 Server ...
    we are looking information about differences between config oracle 8.0.6 in NT Server and Windows 2000 Server
    thanks in advance
    rodolfo

    My tnsnames.ora file is using SID and not SERVICE NAME.
    The configuration is the same as the other NT server I am using, this is actually a new server we are trying to replace the production with. The only difference is the OS so far. I looked at all the configuration files and the only error I get is that TNS 12203 error when I try to connect to Oracle.
    When I try from any client it does the same thing, TNS 12203 and no connection to database.
    Could it be the OS, or does anyone know anyone that has Oracle 8.0.6 on a 2003 Server Box.
    Thanks for your help guys.

  • How to sync iPhone with iTunes on another computer?

    How to sync iPhone with iTunes on a second computer, without losing everything on iPhone please?
    iTunes is giving me the message: "If you sync with iTunes it would delete content from iPhone and copy everything from this iTunes library"!

    Yes, i do use iCloud for contacts, calendar and photos...
    I will try to sync it again tonight and let you know how did it go.
    Thanks again.

  • Labview 2009 .exe not working with windows 2000

    I created a simple vi with Labview 2009 to reset a counter in registry key. I changed it to an exe. The program runs fine on any machine with XP but it does not work on the machine I need it on which is running Windows 2000 SP4. I installed the 2009 runtime but I continue to get an error when it starts up saying the vi is not executable and that I need the full development to fix the errors. But like I said it works every where else. I've tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi that is not compatible with Windows 2000?
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    Serial Number Reset Cell 2.vi ‏15 KB

    There was an issue with building DLLs on Windows 2000 - http://digital.ni.com/public.nsf/allkb/431C9BD8F3482033862576A90073441F. Since you say you are trying an EXE, this may not be applicable.
    George M
    National Instruments

  • HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    The music sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to move everything to your new computer.

  • How to connetct macair with windows laptop using wifi

    how to connetct macair with windows laptop using wifi

    m8,
    You might need to download the latest driver for your Dell Latitude(D600). PAN(personal Area Networking or Piconet) is just one of the profiles(device support/services) of bluetooth(SIG). Blue Soleil are only for that blutooth that uses that chips, like that of widcomm. Toshiba/HP laptops have updates for their bluetooth I can't see why Dell wouldn't have also. And check if the driver,is one that is known to work with Nokia phones.
    Good luck.
    Message Edited by android on 25-Feb-2008 12:52 PM
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • How to set ORACLE_HOMES on Windows 2000 for 11i

    How to set ORACLE_HOMES on Windows 2000 for 11i
    As am newbie on windows.
    Its very urgent.

    To set ORACLE_HOME on Windows:
    C:\> set ORACLE_HOME=<location>
    i.e.
    C:\> set ORACLE_HOME=d:\oracle\proddb\10.2.0
    To verify:
    echo %ORACLE_HOME%
    In Apps 11i, you do not have to set it manually, just source the environment file and this will set all environment variables for you.
    - To source the application env file, run envshell.cmd under %APPL_TOP%
    - To source the database env file, run <SID>_<hostname>.cmd under %RDBMS_ORACLE_HOME%

Maybe you are looking for

  • Question onTwo EUL in One environment

    Hi Experts . We are planning to have Fusion middleware setup for Discoverer . we have two EUL's in two different databses . Please let me know how can i create config the environment to use both the discoverer EUL's. i have created two different repo

  • I can't get my "String.valueof()" working

    Hello, I'm trying to create a method to search a string for a char with an if statement. I have created the following but it won't compile anyone know where I'm going wrong? public String string0 = "AEHIOUWY"; public char getCode(char aChar) if (stri

  • How long can Apple photo books be expected to last?

    How long can Apple photo books be expected to last?  Given the type of ink and paper used, what can we expect these books to look like in 10 years?  20 years?  100 years?

  • How to set up bb z10 in Myanmar?

    I can't set up my z10 in Myanmar. I get the error msg "An Internet connection hasn't been established. Please connect to wifi to complete the setup" when I started with my SIM card. Next error msg " Unable to connect" appeared when I connected with w

  • Create new IIDXMLElement

    Working on a project that stores a lot of meta data in the document structure (backing store). This content is not mapped to page content. Using the various command utils ( i.e. IXMLElementCommands)  to create IIDXMLElements one at a time really slow