How to chart date complete

I need a dial guage chart in apex that works similar to this: http://dashboard.virginiadot.org/default.aspx
table has project#, start date, end date, actual start date, actual end date
I need a dial guage chart that shows percentage done if less than 30 its green, if 30 to 60 yellow, if 60 + red...
I know I'm not asking this right, and not giving enough information.. but thats basically where I am..
nothing I have tried has worked and I don't know what direction to go in, where to start..

Hi Shannon,
You mention that your table holds the following information: "+project#, start date, end date, actual start date, actual end date+", and you wish to display the project percentage complete information on a Gauge chart. Are you holding that status/percentage complete value in a separate column, or do you just consider a project to be complete where the actual end date column contains a value? If you are just going to base the percentage complete on the value of actual end date, and you are using APEX 4.0 charts, then maybe you could try doing something similar to this example:http://apex.oracle.com/pls/apex/f?p=36648:39. I've used custom XML to apply a colour range to this gauge chart. The steps to create the sample chart are outlined below the chart region. I would recommend that you review the AnyChart online documentation on Circular Gauge Color Ranges - http://anychart.com/products/anychart/docs/users-guide/gauge-circular-axis-ranges.html?fromtree - as it outlines the various options for applying a colour range to your chart.
Given the information you are storing in your Project Information table, maybe you might consider also using a Gantt chart: http://apex.oracle.com/pls/apex/f?p=36648:4. I hope this helps.
Regards,
Hilary

Similar Messages

How to delete data completely

Hi
please tell how to delete data completely in my sap ides that is removing permanently the master data, sales documents and i want configured every setting back from start. i want to make it as completely newly created sap ides.

Dear Teja,
Just get it installed Again
Regards
Suchait

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

HT4972 How to update I phone 4( iOS 4) to the latest version .not only that but updating my old software to a new in a iPhone 4 will it make any problem to the device or loose it's data completely .

How to update I phone 4( iOS 4) to the latest version .not only that but updating my old software to a new in a iPhone 4 will it make any problem to the device or loose it's data completely .

chrissaji1998 wrote:
How to update I phone 4( iOS 4) to the latest version ...
All the Information you need is in the Support Article you posted from.
iOS 4: Updating your device to iOS 5 or later

How to read .dat file and display on a chart.

Hello, I am very new to labeled and am looking for some guidance on how to display data from a file onto a chart. I have registered the appropriate data plug in (Yokogawa_DAT) however when I try to use the file viewer VI it is still not recognized by LabVIEW. I have included a sample of the data which includes 2 channels plus time stamping and color information etc. The data is produced by a Yokogawa VR100 recorder that is no longer supported, and therefore the native viewing software is impossible to get. Unfortunately my time is limited and learning all the ins and outs of LabVIEW is going to take a good deal of it, I am hoping someone will be able to point me in the right direction to learn the basics of what I am after without having to learn LabVIEW in its entirety. Many Thanks!
Attachments:
D110514.zip ‏3 KB

Yes, Brand new set of data, exactly as it comes off the recorder. Including config files etc.
Attachments:
Yokogawa.zip ‏8 KB

How to convert from line chart data to CSV format

Hi ,
I am using Flex 3 and AS.
I am getting data from MS SQL and display the data as line
chart this is ok.
But i want to convert this line chart data to CSV or .xsl
format.I find one example in fourms the from data grid to CSV
For this URL is
http://www.abdulqabiz.com/blog/archives/flash_and_actionscript/datagriddataexporter.php
But i want Line chart to CSV.Please help me.

Line chart is a just a visual representation of some data
that's sitting in your database. Isn't it? You load this in Flex,
probably using HTTPService class, and pass it to some chart object.
Now when use says that she needs it in CSV format, you're
gonna have to send another request to the server to produce the
same data, convert into CSV or XLS format and let user download it.
Of course, if use doesn't want to download, you don't have to
go to the server, at least for CSV format. You can convert the same
data that used plot the chart to convert to CSV.
Am I missing something here?
ATTA

How to log waveform chart data in any file at specific interval

i am using labview 7.0. i want to save waveform chart data in the file at specific interval given by user. Please give me solution for that.
falgandha

Open the example finder (Help>>Find Examples) and look at the Write Datalog File example. You can also convert your data to text to save a simple text file. Also, the tutorials in the following links probably cover something similar.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

How to create a subVI to Clear all charts data on a main VI

Hi all,
As I am writing a subVI to clear all the "charts" data on a main VI.
The number of Charts is unknown, beasue this subVI need to run at
difference main VIs. Therefore, I can only input a ref. of main VI into
the subVI and find out all the control ref.,then check the classes of
the control. If it is a chart, I need to use "To More Specific Class" to
to select waveform chart. However, if the property node is not create
from the chart directly, the "histroy data" will be missing.
No matter my concept to build this subVI should be right, I donot succeed.
Are there any other methods to do that?
regards,
Ryan

parthabe wrote:
Did you file a bug report with NI, Coq?
No i did not. I got it working with some diagram cluttering, and forgot all about it. As my motto is "If the damn thing works, ship it"
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

AppBuilder:how to update data in a json file

Hello
I have built an android hybrid app with AppBuilder whitch retrieves data from a json file. How can i refresh the json file with new data?
Is there any way to update the apk file in a device after new data entry in json?
Any information is appreciated.
Thank you in advance
Angeliki

Hi,
For some time I have also been trying to do the same thing with no success. So far I have tried a few approaches like $.post functions $.ajax post functions and HTML5 fileWriter functions. I am not well aware of the web development techniques but as fas as I understand the post or update of the json file should be done on the serverside mainly because of security issues. I am not sure how appbuilder works entirely and if there is any way to do this.
Have you managed to find a solution ?
(P.S. my goal is to update my chart data which is of course json file. So the idea here is to get some values from the user input and update the json file values then refresh the chart and display it with the new values).
Best Regards,
A.Dyankov.

How to update data in a xml file.

I am able to retrieve data from a xml file but not able to update data. Also how can i add or delete node from a xml file.

Hi,
For some time I have also been trying to do the same thing with no success. So far I have tried a few approaches like $.post functions $.ajax post functions and HTML5 fileWriter functions. I am not well aware of the web development techniques but as fas as I understand the post or update of the json file should be done on the serverside mainly because of security issues. I am not sure how appbuilder works entirely and if there is any way to do this.
Have you managed to find a solution ?
(P.S. my goal is to update my chart data which is of course json file. So the idea here is to get some values from the user input and update the json file values then refresh the chart and display it with the new values).
Best Regards,
A.Dyankov.

How to get data into the mySQL database?

First some background.
I have a website that has outgrown its designed dimensions and is a huge burden to maintain. See PPBM5 Benchmark
There is a lot of maintenance work involved, so I'm investigating a PHP/MySQL approach to easen the burden and to add functionality to the site. With the current Excel based structure and over 420 entries, it is cumbersome for me to maintain, but also for users to find what they need.
A MySQL based dynamic structure is a lot easier and offers vastly more selection capabilities, like selecting only records that meet specific criteria.
Data submission is done with a form, that contains most of the relevant data, but the drawack is that people submitting their data are often not technically inclined, give wrong answers due to a lack of understanding or making typo's. The test results are attached in one or two separate .txt files, but often they have not read the instructions correctly or did something wrong, so these attached .txt files can not be trusted automatically, they have to be checked before inclusion.
These were my initial thoughts:
1. Data collection:
To avoid spending all our energy and time on correcting typo's, getting missing data, correcting errors, I am investigating the use of CPU-Z in Ghost mode to create a .txt or .html file that contains all relevant hardware info we need and even more. It gives all the info we currently have, but adds data like number of memory sticks, DDR timings, stock clock speed and BCLK setting, video card info and VRAM size, etc.
To see what I mean, run CPU-Z, go to the About tab and press the Save Report button and look at the results.
This can all be done without user intervention in an automatic way, but maybe I need to add an Auto-It file to the test to make it all run as desired.
If this works and I'm able to extract the relevant data from the created file and can insert it into the database, we may be in business for the next version of PPBM5.5 or PPBM6. It does require a modification to the instructions, making them a lot easier, because there is less data to fill out.
2. Data submission:
The submission form can be simplified if the CPU-Z data can be used. We have to create an automatic way to attach the created .html file from CPU-Z to the submission form and we have to streamline the Output.txt and Output-MPE.txt files to be more easily included in the 'form.lib.php' file. It currently is manual labor and very time consuming.
3. Adding to Database:
I have to find a way to create database records from the Gmail forms I receive. All incoming mail messages need to be checked on relevancy and if relevant, need to be added automatically to the database and then offered for approval before final inclusion in the database. Data included in the database will then include submission date and time, Email address, IP address used, plus links to the files submitted and available on the website.
4. Publication of the database:
After approval of new records from step 3, all updates will be automatically applied to the database and accessible for users. I do not yet intend to introduce a user account , requesting login before all functionality is accessible. Too much trouble and administration.
Queries should be possible on things like CPU (check box), so include 17-920, i7-930, i7-950 but exclude i7-980X and i7-990X, Size of memory (check box), Overclocked (boolean, yes, no), SSD as OS disk, and similar options.
The biggest problem is to keep the color grading and statistical indicators (Top, D9, Q3, Med, Q1 and D1) intact on dynamically generated queries. Say you make a query which results in 20 observations, this should show the related colors and legends. Next query results in 48 observations and of course the color grading and legends do need to reflect that. Question in my mind, does the RPI remain constant, independent of the query or does that need to be recalculated on the basis of the query?
Next thing is to allow a user to select a specific observation and by simply clicking on it be shown, in a separate window (detail page) or accordion, all the CPU-Z related information about the hardware.
The graphs, Top-20 and MPE Gains, need to be dynamically adjusted, based on the query used.
5. Ideally, external links:
In an ideal situation, one could link the CPU-Z data to external price databases, looking up current prices for CPU, memory, video card, disks, raid controller, etc. to get instant BFTB charts, based on the query made. But that is the next step.
Situation now:
I have a MySQL database that is easily updated with the new submissions. Simply create a .CSV flie from the submitted forms and import that into the database. The bulk of the initial work is done.Lots remain to be done as you can see above, but that is for a later time.
Question:
I have this table, that needs to be filled with data in the submitted and attached files. Mr. X submitted his data and can be uniquely identified by his "Ref_ID". He attached one or two files in .TXT format with the relevant test data. These files are stored on the server with a concatenated name:
"Ref_ID","-","filename"
Say his Ref-ID is: 20110204-6cf5 and his submitted file is called: Output(99).txt then the file can be found on the server as
20110204-6cf5-Output(99).txt
I need to be able to open that comma delimited file, the contents may look like this: "439","1036","819","531" and insert these contents into the relevant record and fields.
Graphically,
is what I want to achieve.
This being my first exposure to PHP/MySQL, you can imagine I'm not clear on how to go from here.
Added complication is that I actually have 5 numbers to insert per record and two calculated fields, Total Score and RPI should be calculated fields. Haven't yet figured out how to handle calculated fields, maybe only in the PHP/HTML code and not in the database.
I hope someone can help me.

You do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted.

How to delete the complete contents of database table ? should be empty !!

Hi Guys,
I have requirement where i have delete the contents of database table..i have make it empty (no records at all) and then i have to fill it with the records from the excel sheet.
I can upload data from the excel sheet.
Please tell me how to delete the complete contents of the database table ??
Regards
Rahul

hi ,
just write like this,
delete from <database table>.
commit work.
sample code, here edpar is database table.
delete from edpar." FROM TABLE g_tab_delete.
call function 'DB_COMMIT'.
loop at g_tab_edpar into g_wa_edpar.
 insert into edpar values g_wa_edpar.
 if sy-subrc eq 0.
 move-corresponding g_wa_edpar to g_wa_edpar1.
 append g_wa_edpar1 to g_tab_edpar1.
 else.
 move-corresponding g_wa_edpar to g_wa_edpar2.
 append g_wa_edpar2 to g_tab_edpar2.
 endif.
endloop.
that's all it works.
reward points if helpful.
regards,
seshu.

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

How to load data from a flat file which is there in the application server

HI All,
how to load data from a flat file which is there in the application server..

Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar.

How to chart date complete

Similar Messages

Maybe you are looking for