How to check a downloaded OSS Note?

Hi all,
I asked to ABAP team to download one OSS Note.
OK, the Oss Note has been already downloaded.
Now, how can I check, in the system, this downloaded OSS notes?
Thanks all and rgds,
Barbara

Hi,
Go to SNOTE transaction.
In that download ur SAP note.
And GOTO SAP NOTE---> IMplement.
It will give info if it is already implemented.
Else u can implement it..
Cheers,
Simha,.

Similar Messages

How to export &import the OSS note?

Hi Team?
How to export &import the OSS note?

Dear Jagadish,
Download SAP Notes from the SAP Service Marketplace and upload them in Note Assistant.
Start Note Assistant (transaction SNOTE).
Download the SAP Note from SAPNet - R/3 Frontend. To do this, choose "SAP Note Download" (Ctrl + F8) and enter the relevant SAP Note number. The downloaded SAP Note appears in your worklist under the category New.
Read the SAP Note!
Check whether the SAP Note entails manual activities. (See also answers to questions concerning ABAP Dictionary objects and messages.)
If this is the case, first perform the manual activities.
Implement the SAP Note. To do this, choose Implement SAP Note. During implementation, Note Assistant may download prerequisite SAP Notes that must be implemented before.
Also read and check the prerequisite notes! This is necessary, since they may also contain manual activities. If you don´t do this, the syntax check can bring up an error of the relevant field of the function module, for example.
Reward points if it helps.
Regards,
Naveen.

Download OSS Notes

Hi
I want to download OSS notes Which has a componant for more than one release. I want to download for specific release (eg4.6B) can you tell me the whole procedure for that ? Even by using OSS1 can you tell me the whole procedure.
thanks

hi Patel,
u can download from
https://websmp204.sap-ag.de/notes
You will need your "S" number and password.
Regards,
Vinoth

How to find whether an OSS note is applied in the system?

Hi experts ,
Can anyone explain how we can find if an OSS note is applied in the system.
Please respond to the query, points will be awarded .
Best Regards
Anand

Hi Subodh,
Thanks for your reply and valuable information.
I could not checked for snote and SPAU as I am not authorized. suppose a note has been applied throgh SNOTE , can we find this note in the code ?
In my case a particular note is applied for MM02 but when I check code I could find several note but not the note being disuceed.
I will try to check with some one authorized for SNOTE in my client.
Thanks again.
Best Regards
Anand
Edited by: Anand Tripathi on Jan 19, 2008 7:52 PM

How to check all items are not null in CAML Query?

HI All,
In a CAML Query, i got three items. In all three items, a particular column(Closure Date) should not be null. How to check in all three items, where 'Closure date' is not null?
Thanks in advance!

Hi,
Try this:
"<Where><IsNull><FieldRef Name='Closure Date' /></IsNull></Where>"
Hope it hepls!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

How to look out for oss notes

how to look out for oss notes

OSS Note
http://www.sappoint.com/basis/.pdf
http://www.sap-img.com/basis/oss-notes.htm
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
REgards,
Santosh

How to find the right OSS Note for my SAP version

Hi All,
There have been issues with the Vendor/Material Master records whenever we run a LSMW by recording process. It is such that all those fields that we have not updated come up with a value as *DELETED* for which i think we should implement a OSS Note to our system.
I am unable to find the right OSS Note Number for this to our SAP system :
SAP_APPL Support Pack: SAPKH50009 Components:Logistics & Accounting.
Request you all to provide me with the correct OSS Note Number so that we can get this issue corrected as this has become very critical.

Hi,
As Jurgen wrote - it could be some programming problem.
But, generally, if you find a SAP Note, that, in your opinion, can solve your SAP problem and it is not intended for your SAP version - simply write to SAP OSS.
If this note really solves your problem, they will extend the validity of this note for your SAP version.
Otherwise, if it is SAP problem, OSS will try to provide solution for it.
I usually act like this - it works.
Hope it helps, not this time, maybe in the future.
Regards,
Wojciech

How to check customer reference no. not being use more than once

I have the following situation and appreciate if some one could show me a simple solution.
On the Sales order window, when user enter a value for Customer Ref. No, check if the entered value has already been used on any existing Sales Order, and give message eg. this Ref. No already been used in SO. 257
What is the easiest way of implementing the validation?
Using Formatted Search?
Triggers or Stored Procedure?
Or one must go about doing this simple task using SDK, DIAPI?
sample code illustrating solution would be much appreciated.
I tried to create a query and used it with Formatted search on the Field, but failed on an error.
the code using temporary hard coded value instead of $[$x.0.0] looks like this
if (SELECT    COUNT(*)
FROM         dbo.ORDR
WHERE     (NumAtCard = 'AAA' and CardCode ='1234')
) =0
     Begin
                   select 'AAA' --redisplay value
     end
else
              begin
SELECT     TOP 1 'already used in SO '+ Convert(Char(3),DocEntry)
FROM        dbo.ORDR
WHERE     (NumAtCard = 'AAA')
         end
where 'AAA' is the reference no. to check for customer '1234', this code works when I run it in SQL query analyser, but failed when I run it as query in Business one. the idea was to redisplay the entered No. 'AAA' if it is not found in any existing SO for cust ='1234'
can anyone point out what the error is or show alternative code for the query.
thanks

Hi Andy,
I believe the best way to do this is probably to use the SDK as (to my knowledge) this is the only way you can get a message to be displayed and to stop the actual processing of the document.
If you want to go the formatted search route I would suggest you change your query a bit. I have played with your query and the following is an example as I got it working in SBO. I think SBO gets confused if there is more than one select statement that returns a result and I have started using variables to save the results of the select statements in.
[code]Declare @Val varchar(100)
declare @Count integer
set @Val = $[$14.0.0]
if (SELECT COUNT(*) FROM dbo.ORDR WHERE (NumAtCard = @Val and CardCode = $[$4.0.0])) > 0
begin
SELECT TOP 1 @Val = 'already used in SO '+ Convert(Char(3),DocEntry) FROM dbo.ORDR WHERE (NumAtCard = @Val)
end
select @Val[/code]
I hope it helps a bit,
Adele

How to check that Delta is not captured?

Dear Experts,
I am using 2LIS_02_ITM datasource.
PO is created using a program.
The next step in the program, it can change a field in the PO depending on logic, using a abap command 'update'.
Sometimes, this change is not captured in the delta queue, it seems.
why i say this is the PO shows the field value but BI delta load does not.
It is using Queued Delta now.
Initially, the program uses a command 'update' to update the field in PO.
Now, we decided to use ME22N program to ensure delta will be created.
The problem is happening to some records and not all delta records.
Its very difficult to tell what is the cause.
What is the standard method to check that Application table data is not captured in Delta Queue by the extractor?
Or
If PO can show the field value, is there a possibility that Delta may not capture this field change?
regards
Pascal

Well just throwing few possibilities:
1 - Basically PO creation, change in values/quantities etc are Business transactions and they generate evens known as BTEs.
Now we have to explicitly inform SAP ECC that which applications can use BTEs and we do this by tcode BF11.
Check if the software component creating and changing POs is properly linked to BTEs and if BW is set as active in BF11 tcode.
2 - If point 1 is checked and nothing is found to be incorrect, please check if Industry sector is correctly chosen (SBIW). Industry sector generates a set of Transaction keys (BWVORG) without which the values are not updated in BW.
Also rightly pointed by Tbollo, you need to ensure that there's a pattern in the missing docs to identify the rootcause.
Debanshu

How to check mails send or not

Dear All,
I am Using Java Mail API to send mail even if there are some invalid mailids in the cc list, But some time mail are not sending because of some mail server issues(eg insuffcent storage), Is there any fuction to handle this issues,Please advice me how to identify.
Is there any other way apart from catching the "SMTPSendingFailedException"
with Regards,
Prakash Shanmugam

ksp wrote:
Now I have 2 more questions now
1) When we use attach option in java mail API, the junck are displayed in our java server console, how to block this unwanted junck characters.What junk characters? Maybe you need to disable debugging or not log to the console, but to file or something.
2) Is there any function to store the mail contant and send it automatically to the mail server, when the mail server gets ready.No, you will need to write that yourself.

How to check that exception is not thrown for particular exception alone

Hi,
I want to check for Exception but I don't want it to throw exception when it is
java.net.SocketException.
I want to throw message for all other exception.
Please let me know how to implement it.
Thanks & Regards,
Nasrin.N

try {
//some exception throwning code
} catch (SocketException e) {
//handle the exception
} catch (Exception e) {
//all other exceptions are handled here
}

How to check iPhone 5S is not refurbished

Hi there.
I have a ques ...
I wanna buy an iPhone 5S but quite concern about the device quality (original and not refurbished).
Actually I am not able to but the iPhone from Apple directly as at my Country no Apple store available yet unfortunately. So I need to buy from a local smartphone store at my Country.
Can anyone please advise me ... the best way to check iPhone 5S is original and not refurbished?
Thanks in advance.
Regards.

Hi Ralph.
Few more ques please.
- From the serail check result of selfsolve.apple.com, by which parameter I can undersatnd its not refurbished?
- Is there any other way to get Serial number rather than Settings > General > About?
Sorry to ask silly ques ... I dont have any iPhone nearby right now to check.
Thanks.
Regards.

How to check UC560 FXO Port Not Problem Question

Dear All,
We are newbie on Cisco UC560.
Our customer use Cisco UC560, ESW-520-24P and Cisco SPA 502G and 508G for their branch office replace old traditional PBX. Cisco UC560 have built-in VIC2-4FXO and VIC2-4FXS.
Our customer PSTN line connected to UC560 FXO port (1 line PSTN).
We receive report from our customer that they cannot make a call to PSTN and receive call from PSTN that connected to UC560 FXO port (on physical FXO port LED Green turn on). When the problem happen our customer has restart UC560 or shutdown FXO port from CLI.
We have do some test to our customer UC560.
- Moving PSTN line to another FXO port (example: port from 0/1/0 to 0/1/1). The result is same (cannot make call to PSTN and receive call from PSTN)
Today, We have checked on our customer UC560 via show voice port summary and found that port0/1/2 and 0/1/3 OPER status is up wihout cable connected to this port.
Our question:
- What command on UC560 to make sure FXO port on UC560 doesn't have problem?
We attach:
show tech-support voice
show tech-support
We hope you can give us information about this.
Thanks For Your Attention

Hi There,
If you cannot find the Indonesian "Disconnect Supervision" you may get away with using Singapores "Disconnect Supervision" as your carrier networks are similar to each other
Cheers,
David Trad.

How to check which views are not read only

Hi, I need to run a script in order to get the views that were not created with the read only option. Where can I get that info? It doesn't seem to be in dba_views.
Thanks and regards

Join it with DBA_CONSTRAINTS (CONTRAINT_TYPE = 'O') :
SYS@db102 SQL> select view_name, text from dba_views where owner = 'U1';
VIEW_NAME                      TEXT
V_EMP_RO                       select empno,ename,job from myemp with read only
V_EMP                          select empno,ename from myemp
SYS@db102 SQL> select view_name, decode(constraint_type,'O','RO','RW')
2 from dba_views v, dba_constraints c
3 where v.owner = c.owner(+)
4 and view_name = table_name(+)
5 and v.owner = 'U1';
VIEW_NAME                      DE
V_EMP_RO                       RO
V_EMP                          RW
SYS@db102 SQL>

How to check the OSS note in SAP Client system ?

Hi all
I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
Please let me know..
Thanks
Mallikarjun

Hi
1) One way is checking the version and support pack applied.I.e,
On the main SAP screen > Systems > Status > Check details of the "Component version".
2) STMS > Double click on the system you need to check > Check the status of your request.
Nadini

How to check a downloaded OSS Note?

Similar Messages

Maybe you are looking for