How to check a quality of a picture

Hello. Im a starter graphic in small company. I decide to try adoboe software to make my projects. My task;s is to make pdf files from illustrator and send them to printer company to make copys. And i have a problem because printer company dont want to print my files coz they said " you have too small quality of pictures in your pdf, we need 300 dpi or more to print this in good quality". Im using illustrator to change photos or adding some text to background then i make .pdf file in illustrator.
And my question is how check quality of pasted picture (example i go to file>new>ok>ctrl+v some picture from memory and how to check what dpi have this picture)
In save menu to pdf i have printer quality check
Thanks for answare. CHeers

szeli,
Soo if iths PPI and in print company they wana miniumu 300 dpi how many ppi this will be ?
Many use the terms PPI and DPI indiscriminately, but wrongly. DPI expresses how closely dots are placed in print, whereas PPI expresses digital image resolution. If one pixel is used to produce one dot, the values correspond to each other, but the relation depends on the process.
To muddle things a bit, with traditional (amplitude modulation) halftone screening, the key concept is LPI (lines per inch) rather than DPI.
The general rule is PPI = 1 - 2 times LPI, 1.5 times LPI often being suitable or even best for traditional screening; the pleasant increased woolliness of stochastic screening (frequency modulation) may give you better images or allow lower resolution. The LPI may be 150, 100, or lower, or higher.
To muddle things a bit more, if the images are line art, the required PPI may be much higher than 300, maybe 1200 or more to create what is (at least sometimes) called SPI (spots per inch).

Similar Messages

I upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures? iPhone 5

i upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures?
iPhone 5

How does iPhoto play a part in this? You're in the iPhoto forum. Shouldn't you be asking your question in the iPhone forum? I'll ask the powers to be to move you question to the iPhone forum.
OT

How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

I have purchased an new PC since my oriiginal PC crashed after 5 years of use. I want to transfer my iTunes files from my iPAD and iPOD to my new PC.
How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

The text below is copied from this discussion.
https://discussions.apple.com/message/11527071#11527071
Authorize your new computer's iTunes first - Store>Authorize this computer.
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
This discussion has much of the same information and even some more helpful tips.
https://discussions.apple.com/thread/3305461

Checking book quality before ordering

Does anyone know how to verify that the PDF file transmitted when ordering a book accurately represents what you see when designing a book?
Why I want a preview of the PDF...
My order this year consisted of 3 large books and 3 extra-large books. Both were identical projects in iPhoto with the only difference being the size of the book. The large books arrived looking great and the extra-large books had 21 out of 30 pages that looked terrible. These were not issues related to the image resolution. I'm familiar with the little warning icon when images are too low of a resolution.
Customer service offered my wife a partial refund because they said that the PDF's on their end looked horrible as well and therefore we were somehow to blame. They suggested not using WiFi and closing all other applications before ordering.
I was livid because this is our 10th year in ordering books and we've never had this problem. I called to complain since our iMac isn't using WiFi and there's no way to check the quality before ordering. I can accept that the printing company isn't to blame due to the rule of garbage-in-garbage-out but I can't see what I could have done differently to avoid this.
I was given a full refund and advised to place the order again. I should then wait 30 minutes and then call with the order number and ask them to preview the PDF for me to make sure it looks ok. I'm sure this will catch any glaring problems but it doesn't seem very efficient. Seems like there should be an online preview capability.

Answering my own question:
The "More Like This" sidebar after I posted suggested the following thread which looks interesting:
https://discussions.apple.com/message/15636680#15636680

Quality of my pictures after I burned a DVD out of imovie 11

I have created a new imovie project for our High School for their Basketball dinner and I just "shared" the project and created a DVD with idvd. The quality of my pictures is terrible..... I can't present this at the dinner. How can I get a better quality dvd???? HELP. The dinner is this weekend.

Hi
The quality of my pictures is terrible.....
There are minimum two major reasons to this.
A. DVD is as standard Low eg as old CRT-TV - No DVD encoding program can do better than this.
B. iMovie'08 or 09 or 11 - Makes things even worse by discarding every second line resulting in a quality loss of 50%
C. Rendering can also make things worse especially when using "Share/Export to iDVD"
and using transitions in the SlideShow project.
• iM'08 to 11 - Publish to Media Browser - in iDVD import from this
• iM up to HD6 - just close it and let iDVD import the movie icon (with a Star on it)
High Quality (suggestions)
• Make a Blu-Ray disk - with Roxio Toast™ incl BD-component, BD-burner + BD-disks
• Use Camera and show photos from this
Just some thoughts from Bengt W

How do I combine two or more pictures into one?

How do I combine two or more pictures into one?

I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else. I wanted to put several photos from a file onto a new blank image. This is what I did.
1. Create a blank page.    File/New/ Blank File.   Put in the size. I used 8x10.
2. Bring the photo you want to use into Elements as you always do. It will list along the top next to the blank sheet.
3. Choose SELECT (top of screen)/ Select All.
4. Choose Edit/Copy   or Command "C"
5. Click on the Blank File.   Chose Edit/Paste or Command "V"
6. Click on Image/ Transform or Command "T". There should be a dotted line around your pasted image. You can then move and adjust the image to how you want it. When finished, press the check-mark on lower right of photo.
7.   Repeat this with all the photos you want on the new blank file.
8. You will see on lower right of Elements, the background layer and as many layers as you have photos. These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible. This will merge all layers to the background.
9. Save as and you are done.

Wht r post installation steps of BW 3.5 & how to check it installed correct

Hi,
Have installed BW 3.5
At end of installation is ask me abt SLD
Im not selecting SLD
send me BW 3.5 Post installation guide and how to configure with R/3 4.7 Server or ECC 5.0 or ECC 6.0
I don't need SAP offical guide, I need word document with step by step picture.
how to check it installed correct
mail me <email address removed by moderator>
Edited by: deepak kajale on Dec 3, 2008 2:25 AM
Edited by: Siegfried Szameitat on Dec 3, 2008 8:36 AM

>
Markus Taxacher wrote:
>Is the only possible way to migrate the BW 3.5 to ERP/ECC 6.0?
> Whats the easiest way for upgrading to 6.0?
>
> Best regards,
> Markus
Hi, you cannot use BW3.5 you must have BI7 (not ECC6!) to install BCS 6 - BCS sits on BI (formerly known as BW).
It doesn't matter what version of source system you have, you can still collect data from ERP 4.6, you don't necessarily need ECC6.

Would like to verify Time Machine backup but when I enter TM and then open iPhoto, it only provides me a gray window telling me the size of the file. How do I make sure all iPhoto pictures have been backed up on Time Machine?

Would like to verify Time Machine backup but when I enter TM and then open iPhoto, it only provides me a gray window telling me the size of the file. How do I make sure all iPhoto pictures have been backed up on Time Machine?

HaJo-aus-BS wrote:
Since Snow-Leo time machine offers an option to verify backups, but I have found that it does not work for external disks attached by USB or FireWire.
Yes, that's for network backups only.
What can I do to make sure that the backups are OK?
You can tell if the File System (the various directories, catalogs etc.) is ok by repairing your backup drive, per #A5 in Time Machine - Troubleshooting.
You can "spot check" whether the Time Machine "Star Wars" display seems correct.
You can do a full system restore to another disk per #14 in Time Machine - Frequently Asked Questions, then start up from it and see if things are there and seem to work.
You can keep "secondary" backups (always a good idea). See #27 in the FAQ post for some suggestions.

How do you fix Upside down,sideways picture on Facetime Iphone?

How do you fix Upside down,sideways picture on Facetime Iphone?

Hello rvalen,
From what you describe I would take a look at the side switch, it may be set to lock the rotation of the screen.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
Troubleshooting Rotation Lock
If your iPad display does not rotate as expected, verify that Rotation Lock is off:
Check the status bar for the Rotation Lock icon.
Toggle the Side Switch to verify that the device is not locked.
Note: Some apps do not rotate to match the current or locked orientation. Use the Home screen to determine Rotation Lock status.
If Rotation Lock is off and you are still unable to rotate the iPad display, restart your iPad:
Hold the Sleep/Wake button until "slide to power off" appears, and then slide to turn off your device. When it is off, press the Sleep/Wake button to turn it back on.
Regards,
Sterling

How to check the Customizing setting in Different SAP CRM System

Hello Guru's
I want to know how to check the Customizing setting in Different system i.e (Sandbox,Development,Quality,Production)
I mean to say that i was to check all the 4 system are in same line in all the aspects or sink with each orther
Thanks in advance
With Regards
Sreeram

hi
to synchronise all the clients in the CRM,u need to structure ur transport request,that is whenever a request has been made,the same has been transported to all the clients or not
Go to T-Code -SE09 and copy all released transport request from each client from Sandbox,Development,Quality,Production and match all request manually.
this is just a way other may be to see manually all the settings in all the clients
best regards
ashish

Sound Check Audio Quality

Hi,
I have many CD's ripped in apple lossless encoding stored on my Apple TV. I use the optical output for optimum audio quality. Does anyone know how Sound Check actually works and does it affect the sound quality.
Thanks,
Paul.

No idea how it works, but I assume it reduces dynamic range.
Whatever it does it sounds awful.
AC

Satellite P500 - How to check HD viewing?

How to check either I'm viewing my new Toshiba notebook into HD viewing? Is there information on my notebook that has this information where it tells me either it is HD or not? Dosnt look HD at all unless it is.
thank you

Hey tagvic7,
I think I did never read such a question before...
Well, first of all you must make sure that you are watching HD film material. For example if you have film in 640*480 pixels thats not HD quality. HD material has a resolution of 1280*720 (720p) and full HD 1920*1080 (1080p).
So if your P500 has a HD screen you need at least videos in these resolution to enjoy HD viewing. ;)

How to check roles ?

Hi
I need to know how to check what are the roles assigned to a particular user ? I want to know the user has SAP_XI_RWB_SERV_USER and SAP_XI_RWB_SERV_USER_MAIN roles. How do I find this out ?
Midhun

Midhun,
Note that you can assign roles to both Java and ABAP stacks
SU01 is correct for ABAP.
This is an example from PI 7.1 but a similar concept applies foe XI 3.0 etc
For J2EE administration go to the url http://hostname:50000/nwa
Users and Access
Identity Management
Search Criteria - Select as required then enter a username
ABAP
UME Database for J2EE functions
etc
Then select the user to view details
Hope this completes the picture.
Regards,
Mike

The database structure has been modified - how to check if it happend?

Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
Hmg

Hi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish.

How to check connection from SAP to reservation system?

Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.

Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta

How to check a quality of a picture

Similar Messages

Maybe you are looking for