How to check agent in windows server

The database I am working on is running in windows remotely - I got the error that agent is NOT responding so rman job soandso_weekday suspended on agent unreachable.
in unix - it was just a command - emctl status agent - after logging in server - I could not figure in windows - is there anywhere I can check in grid control as well. Thank you

+++
From Grid console:
Setup -> Agents
;)

Similar Messages

  • Can't install DPM agent for Windows Server 2003

    Hi,
    We have DPM 2012 backup server.i try to install DPM Agent on Windows server 2003 PC. but installation failed.below error are Occured.
    Install protection agent on (serverName.domain name) failed:
    Error 347: An error occurred when the agent operation attempted to create the DPM Agent Coordinator service on (serverName.domain name).
    Error details: %1 is not a valid Win32 application
    Recommended action: Verify that the Agent Coordinator service on(serverName.domain name) is responding, if it is present. Review the error details, take the appropriate action, and then retry the agent operation.
    HOW CAN SORTED OUT FOLLOWING ISSURE
    Thanks,
    Gayan

    Hi,
    The below blog outlines the needed steps for protecting
    Windows Server 2003 computers using Data Protection Manager 2012 R2.
    http://blogs.technet.com/b/dpm/archive/2014/06/11/details-on-protecting-windows-server-2003-computers-using-data-protection-manager-2012-r2.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
    answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

  • How to check Agent login details in a particular CTIOS

    How to check Agent login details in a particular CTIOS

    Yes, you'll need to provide more information.  If you login a supervisor to the CTIOS supervisor desktop who is part of every team you would be able to tell every agent who is logged in and what state they are in.
    david

  • How to merge partitions in Windows Server 2008 quickly and effectively?

    How to merge partitions in Windows Server 2008 quickly and effectively?

    Hi,
    In Windows systems we can only extend a partition to unallocated space behind it - so if we have 2 consistent partitions, we can only delete the second one and extend the first one.
    If the 2 partitions are on 2 different disks, you can also create a spanned volume - you will still need to delete the second partition and convert both disks to dynamic disk to create the spanned volume. 
    If you have any feedback on our support, please send to [email protected]

  • How to use itunes for windows server 2003

    how to install itunes for windows server 2003

    Purchased music from the iTUnes store is in a "AAC protected" format. It can only be used in iTUnes. Any music you buy online these days will have some protection on it where you can only use it in there program.
    The way around this is to burn the purchased songs to a CD in iTUnes. Then goto edit>preferences>advanced tab>Import sub tab and set your import settings to something like MP3.
    Now put the burned CD back in the PC and "Re"import it into iTunes so its imported in a MP3 format so you can use it in any program. Before importing it tho you need to manually add the name of the song, artist album ect ect

  • ACS agent on windows server 2008

    hi,
    We are migrating from windows server 2003 to windows server 2008, i want to install acs agent on the win 2008 DC, i have cco account on cisco i could not find the acs agent installation pacakge i only found the patch file. where can i find the most updated one?
    how i will check if acs agent is working?
    thanks

    Hi,
    Before testing, please ensure that the AD is binded to the ACS. Also ensure that the RA is defined and configured on the ACS.
    The link below gives description of AD integration with ACS:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrDb.html#wp353636
    The following link gives description of the RA configuration:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/NetCfg.html#wpxref7424
    I would request you to go through the COnfiguration guide for defiing NAS on the ACS:
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/NetCfg.html
    Testing can be done from the NAS by the test command:
    Router: test aaa group username password
    ASA: test aaa authen host username password
    Hope this helps.
    Regards,
    Anisha
    P.S.: Please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

  • How to install IE8 on Windows Server 2008 R2 Datacenter?

    Hello.
    Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
    I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
    /featurename:Internet-Explorer-Optional-amd64".
    And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

    you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
    IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
    What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
    You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
    This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
    Sometimes, the component store is damaged, or is missing files.
    you may need to check the CBS logfiles, and may need to perform SFC /scannow
    You may need to use CheckSUR to repair system health.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to enable hibernation in Windows Server 2008 R2

    Hi 
    I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
    but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
    Also checked with powercfg /energy & getting given below errors.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
    The hardware in this computer does not support the S3 sleep state.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
    The hardware in this computer does not support the S4 (Hibernate) state.
    Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
    PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
    with the hardware in this computer.
    Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
    Thanks.

    Hello,
    I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to port forward in windows server 2012 ? for IIS

    Hi,
    I have windows server 2012 in AWS cloud (Public IP)
    Installed IIS 8 and running website in the port 8980 and its working fine (Public IP)
    My question is
    I have CNAME record in Godaddy in the name of example.com which is pointed to my PUBLIC IP ... its working fine. 
    But I want to know how to port the 80 request to 8980 in windows server 2012 thanks.
    Wes

    Hi,
    According to your description, my understanding is that you want that example.com(in Godaddy) to transfer corresponding queries(port and website name) to the website on WS 2012(in AWS cloud).
    Since your domain example.com is supported by Godaddy, I recommend you to contact the supporter of Godaddyand confirm that if their product supports port forwarding.
    In general, if you useWindows ServerInstruction, we may enable NAT(Routing and Remote Service) on network interface to redirect services/ports.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to check whether the Application Server directory exits or not

    Hi,
    I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
    Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
    Can anyone help me on the same how to check whether the server directory exists or not.
    Thanks in advance.
    Best Regards,
    Pradeep.

    Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
      Store the directory name
        l_dpath = p_file+0(l_no).
      Validate the directory of the application server
        CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
          EXPORTING
            dir_name               = l_dpath
          TABLES
            dir_list               = l_i_dlist
          EXCEPTIONS
            invalid_eps_subdir     = 1
            sapgparam_failed       = 2
            build_directory_failed = 3
            no_authorization       = 4
            read_directory_failed  = 5
            too_many_read_errors   = 6
            empty_directory_list   = 7
            OTHERS                 = 8.
      If any problem occurs with the directory then display proper
      error message
        IF sy-subrc <> 0.
        Display error message
          MESSAGE e018 WITH 'Problem with directory entered'(008).
        ENDIF. " sy-subrc <> 0
    Regards,
    Joy.

  • End-User Experience error running agent on windows server 2008 R2

    Hi,
    I have installed implemented the end-Uer experience agent in a Windows 7 without issues but when we have installed the SDM 7.30 agent and the SAP GUI 730 in a Windows server 2008 R2 and we have configured the agent as End-User experience monitoring Robot in solution manager.
    We have distributed one script without issues but the executios are failing with the message:
    "SAPGUI Compontent" could not be instantiated (sapfewse):605
    We have reviewed the bellow notes but wothout success:
    1261706 - Kill bits set for SAP GUI Scripting
    1092631 - Remote vulnerabilities in SAP GUI for Windows
    We are able to run the scripts in the server directly in the SAPGUI and even with the EemEditor.
    SAP message is open since last week, but my be you can provide a faster response.
    Could you please help me.
    Kind Regards

    Have you followed installation procedure described in the following article: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html ?
    You can find troubleshooting hints in the following article: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_troubleshooting.html
    I'd reccomend to install CDA instead of AD agent (nice GUI...) but you'll have to create new (virtual) server for that: http://www.cisco.com/en/US/docs/security/ibf/cda_10/Install_Config_guide/cda_install.html

  • How to share file between windows server host and hyper-v windows server ??

    Hi there
    I installed windows server 2012 r2 as my host windows and again installed windows swrver 2012 r2 on hyper-v in one system .
    now when I go to file explorer > netwrok there is no computer name to share file or folder between them 
    How can join both windows to netwrok place in file explorer to share file and folder 
    before I try windows 8 as my host and server 2012 r2 as hyper and when I went to file explorer > network there were to pc's there . first windows 8 and second win server 2012 
    but when both windows are server there isn't and network pc's in network location on file explorer 
    please help me how can I bring them both server to file explorer > netwrok 
    Thanks
    Regards :
    Raha
    whit the best regard : Raha

    Hi 
    thanks to you both
    but when we install windows server as host there is not our windows in the 
    Internet\Network and sharing center\ ....... and in the file explorer > network 
    I found it when I add server host in server manager in guest server and manage it as host server user and then share files and folders from computer management and then create a shortcut from the share folder to desktop 
    and the did same for guest ... add guest server in server manager in the host server and manage it as guest server user and then share it's files and folders from the computer management and create a shortcut of share folder to desktop 
    if host windows be a client windows so this is so easy because after we install hyper-v win-server and go to file explorer > network > so we able to see both windows and all files and folders there but if host windows be a win-server we can't see them
    in file explorer > network 
    thanks you both again 
    Best Regards :
    Raha
    whit the best regard : Raha

  • How Configure background update on windows Server

    Hi,
    I read Admin guide from http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html page 17-19 for background update installation and configuration but Document ask to create directory structure in Linux style and i want to configure it on my windows server please advice me how i create directory structure on windows server for background updates.
    Your kind response much appreciated.
    Regards,
    Ahmed

    On the Server where you want to share \usr\sap\trans for the landscape( I assume Server1 or PC1 in your terms), login as windows domain admin ( or with admin rights) --> right click my computer --> Manage --> click on Local Users and Groups --> Double click on administrators --> and add users of SAPService<SID> of the other server ( your Server 2 or PC2) and clock pk Ok.
    This should resolve the problem.
    Concept is, giving other server to read and write access to shared drive of Transport directory. There can be no. of days do implement it depending on in House Windows Skills and Secuirty audits, but the above method works.
    Thanks,
    Krishna

  • How to RDP access my Windows server 2012 system with Windows 7 system

    In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
    1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
    2. Disabled the firewall in Windows server 2012.
    Can someone advice me on the below.
    1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

    Hi,
    Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
    Create a incoming UDP rule on firewall to allow port 3389 and give a try.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • How to check whether a Oracle server is installed or not ?

    Hi,
    How cani check whether a Machine has oracle server installed or not ?
    I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
    Thanks in Advance..

    user11000236 wrote:
    Hi,
    How cani check whether a Machine has oracle server installed or not ?
    I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
    Thanks in Advance..http://tinyurl.com/ngunhv
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Maybe you are looking for

  • Ping on music.app

    I have a dought. In the iPod touch or iPhone, when Ping is activated, isn't it supost to appera a like option on music.app? In iBooks's "iPod guide for iOS 5" it appears this image, so i think it is supost to appear a like and post option in music.ap

  • Issue with group by expression when using non-regular columns

    Hi all, Please help me out to find a solution for this issue. In case i need to group the values where one of the columns is not a regular column. How can i fix the issue? I tried the possibility of using the alias name, from clause query but still c

  • Macbook Pro - cant access password problem

    Hi there, I need some help regarding Macbook Pro, i7 processor. I have been locked out from my Mac (single user) and I dont have the installation cd. I tried some ways but nothing seems to work. Please can someone assist me on how to do it. Thank you

  • What S/W can I use to view files saved on NAS with WVC80N

    I have my camera connected to the network and recording to my NAS all the time.  It produces time stamped avi files.  Is there some S/W out there that will let me review these avi files similar to the way the Linksys Camera Utility works?  I would li

  • How to write agal2 code

    i can not find information about how to write agal2 coding. conditional forward jump code 'IFE' or 'ELS', 'EIF'... I cant know how to write agal code. and how to use Fragment depth. please give me writing agal code, or lecture page.