How to check Cancelled invoices

Hi Gurus,
Can anybody please let me know how to check cancelled invoices in costing. Also please let me know the importance of VBRP table in costing. Thanks.
Regards,
S.Sumana.

HI
VBRK-FKSTO field can be used to check the cancelled invoices,
If you mark this field as X then you can get the list
Thanks
Prashant

Similar Messages

How to reactivate cancelled Invoice, Avoid Duplicate Manul Condition Type

Salute!! Masters,
I am sending detail about error, please provide solution for it.
I shall thankful to you.
1. How to reactivate cancelled Invoice for which Excise Invoice has been created.
Reason is; user has created commercial Invoice first then Excise Invoice subsequently. Afterwards cancelled Commercial Invoice, by the time all detail has been posted to different department & paid Excise charges to the respective department.
Now commercial Invoice detail is required to be maintaining at book level at factory as excise has been paid for the same.
User canu2019t create new commercial Invoice as for this have to maintain Excise Invoice too & pay.
2. How it is possible to restrict it ME21N Stock Transfer Order at order level only to not to allow 0 value & repeat entry for the same condition type?
While making a stock transfer (purchase order) by ME21N from supplying plant (Factory) to other plant (depot), if user make mistake & donu2019t put value for Manual condition type ZMRP, system accept & save the order.
Afterwards when he realizes the same or immediately come to know about not putting value & put again, system take that second line entry also & create double entry.
When invoice come then it pick the value from first line & show in negative.
I have triedu2026.
a). At pricing procedure, there ZMRP is required entry.
b). Condition Type - ZMRP, there is C No Limitations
We can not put D Not possible to process manually or fix this condition type as then we have to maintain condition record & prices are varies depot to depot & day by day.
c). Since this is a Header Condition, so canu2019t restrict at Access Sequence level.
This is only has to put manually by user according to the instruction of sales department.
Got Suggestion to change at user exit level to put check at delivery to not to allow printing or invoicing by putting 0 value/without any value.
Please suggest at configuration level only as itu2019s difficult to create User Exit for all requirement.
3. PGI should not happen for forward date; user can put only either current date or back date.
Rgds.
Srivastav
+91-9694096833
Edited by: Srivastav100 on Jun 14, 2010 11:22 AM
Edited by: Srivastav100 on Jun 14, 2010 11:24 AM

Unsolved, Closed.

How to reverse canceled invoice

HI gurus,
       I have created an invoice through MIRO, it has posted one million to the exchange rate gl. It's very huge amount difference. so canceled that invoice through MR8M, then the forex amount is not totally reversed, it split into forex some part and to ppv some part...
      1) Could any one explains how it was not totally reversed to forex,
      2) How to reverse the Invoice with full forex?
      3) Can I re-reverse the canceled Invoice?

You cannot re reverse the cancelled invoice. You have to do MIRO again. Check the settings in SPRO in transaction OMRW-Configure how exchange rate differences are Treated. One possible cause for the foreign exchange difference not being posted on reversal could be that the settings for treatment of foreign exchange differences here have changed.
Thanks and regards
Kedar

How to check duplicate invoice

Hi
How to check the duplicate invoice postings?
Is there is any tcode to check the duplicate invoice postings?
Kindly need your inputs?
-Prabu

Hi
you can download the List of Invoices from RBKP table usiong SE16 whcih stores the Reference invoice number , if two invoice have similar refernce number then this is aduplaicate invoice. Check the Purchase order to Verify the Same
Thanks & Regards
Kishore

How to configure cancel invoices status to be cleared automatically

Hi Sd gurus,
created sales order,delivery and invoice and i have canceled the invoice. The document flow is like
Sales order - completed
Delivery- Being processed
invoice- completed
accounting document-not cleared.
cancel invoice(s1)-completed.
accounting document-not cleared.
but my client needs all cancel invoices should be cleared automatically, he dont want to do manually. how to configure this,
please help me urgent.
points will be awarded.
Thanks,
Reddy

I resolved this issue my self,because special general ledger assigned for this co code, so not cleared auto matically.
issue closed.
Regards,
Nooka

How to Correct Cancel Invoice

Hi Experts,
The Users did some cancellation Invoices but they changed the date to 15.10.2010 instead of the original 18.10.2010 of the original Invoice. Now, the Cancel Invoice is not being posted to Accounting because the system displays an error "Cannot Post Document Before 18.10.2010." And now we cannot change both the Invoice Document and the Cancel Invoice Document by VF02. We cannot even Cancel the Cancel Invoice.
What should the proper process here?
Thanks for your Answers.

Don't worry about cancelled invoice as accounting document is not generated.
Probably there might be user exit to post invoice documents on current system date that might be cause of this error.
You can cancel invoice using VF11 on current date or ask abaper's to change logic to allow posting for 3 days back dated.

Canceled Invoice view

Hi SD Gurus,
please suggest me how to view or print the canceled excise invoice.
Thanks in advance
V.S.Aasish

if you go to J1IIn and then check cancel invoice you can see the cancel screen here when you do F4, you can search on invoice .
if you want to get data from table , check J_1IEXCHDR and J_1IEXCDTL
Regards
Jitesh

How to Cancel the Cancel invoice? How to reverse the vf11 entry?

Hello Experts
Need suggestions on the following.
I have created wrongly the cancel doc in VF11. This was suppose to do for this year but did for last year.
How can I cancel/ reverse this doc which is generated in vf11.
Regards
RaviRaj

Hello
Please make search before putting up you specific query.
Refer following link:
- Cancel / reverse billing document cancellation document?
FYI - Based on standard config you can not cancel a "cancellation Invoice".
As if you check the Std Cancel. Invoice (S1), don't have Cancell.billing type.
Regards
JP

How to cancell Invoice by VF11

Salute Masters !!
I have created one new Sales Order Type PW00 Warranty Order for Plant P&YE (Port & Yard Equipment), Copied from Existing Sales Order Type EW00 Warranty Order Type for Plant BMHE (Bulk Material Handling Equipment) in which I have given separate No. Range From 3330000000 To 3339999999.
In PW00, I have given Delivery Document Type PY00 by No. Range from 3270000000 To 3279999999; Delivery Related Billing Type PY01 by No. Range 3290000000 To 3299999999 and have assigned to respected document.
Now, Sales Order has been created by 3330000000, subsequent Delivery has been done by 3270000001 and Invoice has been done by 3290000003, Released to Accounting and Excise Invoice done by 3290000003.
Now user wanted to get the same No. by which Accounting document generated internally which was created by FI side through FBN1, No. Range 3601000001 To 3791099999, for their Financial Accounting Document Type (OBA7), as it was given in my Billing Document type PY01, that is PB (Standard was EB), instead of 3290000003,
as his other plants Nos. are same as well as Invoice No. & Accounting Document No.
I have changed No. Range from 3290000000-32999999999 To 3601000001-3601999999 in VN01.
After wards user cancelled the excise invoice and tried to cancel Commercial Invoice by VF11, now system is giving error,
No Billing Document were generated
When check error log, its saying, Data inconsistency during processing of Document 3290000000
The Billing Document 3290000000 is already cleared
I have changed again the No. Range from 3601000001-3601999999 To 3290000000-32999999999
Still system is giving error,
No Billing Document were generated
When check error log, its saying, Data inconsistency during processing of Document 3290000000
The Billing Document 3290000000 is already cleared
Please suggest how to cancel invoice & give the same No. Range as per user requirement and we can do Excise Invoice.
Thanks & Regards
Srivastav
+91-9973504950

As I already mentioned, you need to remove Copying requirements in Cancellation section of Billing Doc type-PY01 (tcode VOFA).
As the routine is for cancelling an invoice that has been cleared in accounting. So, this copying requirements are FORM routines that check certain requirements as a precondition for the copying process. This requirement checks if a billing document has been paid in AR prior to permitting cancellation. For example, If an error has been made in invoicing, it is possible to create a cancellation invoice and then re-bill the customer for the correct amount. This process, however, should not be allowed if the invoice has already been forwarded to the customer and payment has been received and applied. This requirement can be assigned to the billing document to insure that no paid invoices are allowed to be canceled.
So, remove that and try.
And check you doc number 3290000003 with tcode FB03
Also, Doc type PB in tcode OBA7, check
- number range for doc type.
- Reversal Doc type and number range for reversal doc type.
Hope this can assist you.
Thanks & Regards
JP

How can I cancel a cancellation invoice which is not released to FI? TKS

Hello;
In my company, there is a S1 cancellation invoice which can't be released to FI.Now we want to cancel it. Is there anybody know how to do it?
Thanks

Refer following SDN thread for your understanding/reference:
- Cancel / reverse billing document cancellation document?
FYI
FYI - Based on standard config you can not cancel a "cancellation Invoice".
As if you check the Std Cancel. Invoice (S1), don't have Cancell.billing type.
Regards
JP

CIN: How to check the material document posted without excise invoice

Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
Pakorn

Hi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy

How to delete the document of cancel .invoice.

dear expert:
the document of cancel.invoice is open ,i use vf02 to process it in manually ,system prompt as followed .
yellow info ::
Automatic clearing of billing document 90193616
and canc. doc. 90210214 not poss.
Automatic clearing of billing document 90193616 and canc. doc. 90210214 not poss.
Message no. VF 208
Diagnosis
The system cannot clear billing documents and cancellation documents because, for example individual item updating
is deactivated.
System Response
The billing document can be created.
Procedure
The FI documents are cleared manually.
red error info )************************************************
Account 51010100 requires an assignment to a CO object
Message no. KI 235
Diagnosis
You have not defined a CO account assignment for an account that is relevant to cost accounting.
System Response
Account 51010100 is defined as a cost element.
This means that you must always specify a CO account assignment.
Procedure
Enter one of the following CO account assignments
Order
Cost center / cost center/ activity type
Sales order item (for a project or cost relevant)
Project / WBS element
Cost object (Process manufacturing)
Network/ Network activities
Business process
Profitability segment
Real estate object
The posting row affected is 0000001006, account 51010100.
please help me analyse it .

dear expert :
in the posting how can i assign a CO account assignment (Cost centre, etc.) since it is created as a cost element..i donn't know use whick transaction code to process it ,please tell me detailed info.
best regards.

How to reverse the cancellation invoice?

Dear Experts,
Our user had an invoice document posted through MIRO:
86 GR/IR ACCOUNT     XXXX
50 Stock in Transit        YYYY-
Then reverse the invoice document through MR8M, journal as follow:
96     gr/ir account                    xxxx-
83     exchange rate variance     xxxx-
93     exchange rate variance     xxxx-
40     stock in transit                 yyyy
My question is:
-why exchange rate variance occured in journal cancellation invoice (mr8m)?
My client did'nt want had variance posting; therefore the cancellation invoice journal above
should be reverse.
How to reverse the 'cancellation invoice'?
Kindly advice.
Thank you.

Hi
Please, see SAP Note 46564 - Cancelling/reversing an invoice/credit memo: Posting logic and related notes for a proper understanding of reversing.
I hope this helps you
Regards
Eduardo

How to Restrict Excise invoice of cancelled Proforma Invoice?

How to Restrict Excise invoice of cancelled Proforma Invoice?
I have cancelled (Completed ) Proforma invoice and now I want to restrict creation of excise invoice

Try with J_1I7_USEREXIT_EXCISE_BEF_SAV
thanks
G. Lakshmipathi

How to remove a System Hold from an Cancelled Invoice in 11i

Hi All,
I have a Cancelled Invoice with "Dist Acct Invalid" hold that we need to release from the invoice.
After some analysis I found that there is an invalid account segment value in Invoice distribution that we need to correct.
But, I am not able to modify the distributions.
The invoice is imported from iExp and not accounted.
I am not sure whether it is because of canceletion or I am missing anything.
Please suggest a way out to modify a cancelled Invoice.
Thanks
Sandy

Hi Sandy,
The ap_holds_pkg.quick release function will not release the following type of holds:
('DIST VARIANCE', 'NO RATE', 'CANT FUNDS CHECK', 'INSUFFICIENT FUNDS',
'FINAL MATCHING', 'FUTURE PERIOD', 'CANT TRY PO CLOSE',
'DIST ACCT INVALID', 'ERV ACCT INVALID', 'LIAB ACCT INVALID')
Even if you change the hold to a different hold type and use the quick_release procedure to release the hold, the item will not account.
I would recommend that you re-enable the distribution account. Once you have processed the accounting and sent the data to GL, you can disable the account again.
Cheryl

How to check Cancelled invoices

Similar Messages

Maybe you are looking for