How to check configuration?

I have File2File configuration scenario.
Result after executing Check Function from menu
No errors identified during check
Sender works OK
But Receiver cannot get a message
XIChannel_FileReceiver Receiver Adapter v1027 for Party '', Service 'ABP_FileSystem_XIPattern2':
Configured at 16:02:02 2005-09-21
Up and running - no message processing until now
How to find out a reason of this error?
Message was edited by: Sergey A

Hi Sergey,
You have to send a new Message after activate the Communication Channel.
Than you see the Error Message in Adapter Monitoring or a success Message.
Robin

Similar Messages

How to check whether 620 routine is configured or not?

Hi,
I hv VOFM>Formulas>Conditional value--> 620 routine, its used to determine the SHIPMENT COST DOCUMENT creation and its talks about consolidating all the shipemts together belongs to same customer and there by creating only one shipment (cartons/volume/weight) cost document. (Its developed and done activated)
So, pls let me know that, How to check that whether this VOFM routine 620 is in place (configured) or not in the system?
I tried from SPRO/IMG, but, no use!!
Thank you

This should be in SPRO. See the link at the bottom of this [sap library topic|http://help.sap.com/saphelp_erp60/helpdata/en/93/7440d3546011d1a7020000e829fd11/frameset.htm]

How to check BO Log an Bo configuration

Post Author: Srividya
CA Forum: Deployment
How to check whether the BO log is enabled? As we are very new to BO, can you please tell us the steps to check the same.
Can you tell us the steps to get BO Configuration details from server.

Cmnghellmann,
I don't even know if it's in the database, there's certainly no
supported way to access it if it exists
Shaun Pond

Please help: How to fix error message: Connection error. Try again. Check configuration and if problem persists contact the administrator.

Please help on how to fix this error message when I'm trying to connect on my VPN
Connection error. Try again. Check configuration and if problem persists contact the administrator.

Thanks for the info.

How i check ads configuration working fine ?

Hi,
How i check my ads configuration working fine ?
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jun 9, 2008 2:15 PM

Thanks arafat,
I need some more help regarding this issue. I checked that working fine as u say.
But still my Interactive forms gives error like
com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../local/Test_Interactive/TestInteractive/~wd_key19_1213015656616/Error+PDF.pdf;jsessionid=(J2EE1769300)ID0821942250DB10853844897087772781End;saplb_*=(J2EE1769300)1769350?sap-wd-download=1&sap-wd-dl_behaviour=1&sap-wd-cltwndid=3c74abd1362211dd8c0f00144f411328&sap-wd-appwndid=3c74abd2362211ddb81100144f411328&sap-wd-norefresh=X
    at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:405)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:895)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
Please help me to trace this code.
Regards,
Gurprit Bhatia

How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users..
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The desktop ( w/ASUS Crossfire V Formula-Z mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do i configure the usb port on a draytek vigor 2820n router for use with my imac

i have an imac connected to the internet through a draytek vigor 2820n router. this router has a USB port with a HP Deskjet 5560 printer attached (for use as a network printer for other machines on the network). How do I configure this printer on the iMAC?

I checked on the HP web site. Your aswer is on the HP website under your printer type. Update your drivers and follow the instructions given by HP and the printer will work as you have it connected.
Good Luck

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

How to check the verity version in our PeopleSoft Installation?

How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?

yes. it says the version is 5.0.1
Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
============================================
D:\fs840\webserv\peoplesoft>mkvdk
mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
Usage: mkvdk [<option>...] <filespec>...
Where <option> can be a VDK switch, or any of:
-about Show the collection's about resources
-autodel Delete bulk insert file when no longer needed
-backup <dir> Specify collection backup location
-bulk Submit bulk insert file(s)
-charmap <name> Specify the character map to VDK
-collection <path> Specify the collection (required)
-create Create the collection
-credentials <user> Specify user[:passwd][:domain][:mailbox]
-datapath <path> Specify VDK datapath
-datefmt <fmt> Specify date format to VDK
-debug Enable debugging output
-delete Delete documents
-description <desc> Set the collection's description
-diskcache <num> Set VDK's disk cache size (kbytes)
-extract Extract field values from text
-help Print this usage information
-insert Insert documents (default)
-locale <locale> Specify the locale to VDK
-logfile <file> Save output in a log file
-loglevel <num> Set the VDK output level for the log
-mailboxes This option is depracated. Use the credentials option inste
ad
-maxfiles <num> Set VDK's maximum number of open files
-maxmemory <num> Set VDK's maximum memory usage (kbytes)
-mode <mode> Set the indexing mode
-modify Modify fields using field/value pairs from a bulkfile
-nohousekeep Disable housekeeping
-noindex Disable indexing
-nolock Turns off locking (dangerous)
-nooptimize Disable optimizations
-nosave Don't save collection work list
-noservice Prevents servicing of submitted work
-nosubmit Don't submit work to VDK
-numdocs <num> Number of documents to insert from bulk insert file(s)
-numpages <num> Synonym for diskcache for backward compatibility
-offset <num> Specify offset into bulk insert file(s)
-online Flag for online Bulk Modify
-optimize <spec> Optimize the collection
-outlevel <num> Set the VDK output level
-persist Service the collection forever
-purge Remove all documents from collection
-purgeback Purge in the background
-purgewait <secs> Specify delay before purge
-quiet Suppress all non-error messages
-repair Repair the collection
-servlev <spec> Advanced option for overriding service level
-sleeptime <secs> Interval between service calls for persist
-style <dir> Specify style directory for create
-submit Synonym for noservice for backward compatibility
-synch Perform work synchronously
-topicset <path> Specify VDK topic set
-update Update documents
-vdkhome <path> Specify VDK home
-verbose Output more information
-words Build word assist list
-wordindex Build word assist index
The <spec> for -optimize is a hyphenated string of:
maxmerge Perform maximal merging of partitions
squeeze Recover space from deleted documents
vdbopt Build optimized VDB's
spanword Create word list spanning all partitions
ngramindex Create ngram index into spanning word list
maxclean Really clean (not for read-write)
readonly Make the collection read-only
tuneup Fully optimize for read-write use
publish Fully optimize for read-only use
The <spec> for -servlev is a hyphenated string of:
search Enable search and retrieval
insert Enable adding and updating documents
optimize Enable opportunistic collection optimization
assist Enable building of word list
housekeep Enable housekeeping of unneeded files
delete Enable document deletion
backup Enable backup
purge Enable background purging
repair Enable collection repair
dataprep Same as search-index-optimize-assist-housekeep
index Same as insert-delete
Error: must specify collection
mkvdk done
D:\fs840\webserv\peoplesoft>

How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant Kunjir

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

How to properly configure a home network using both Mac and PC computers

Is there a book or set of guidelines that can tell me how to properly configure (exact specifications) my computers in a home network? Here is what I am trying to do and using:
1) Three computers: iMac (late 06 ver), Macbook (newest version), Dell laptop. The two Macs are using Leopard and the PC is XP.
2) Bellsouth modem which feeds into the Airport Extreme Base Station (AEBS)
3) The AEBS has a USB hub which is connected to a external hard drive and two inkjet printers. A third laser printer/scanner/fax machine is connected to the AEBS via ethernet.
4) All three computers use a wireless connection to the AEBS.
I would like the following:
1) Have a secured and password driven network - don't want outsiders connecting to the nework without permission.
2) All computers to be able to access the USB printers and ext HD.
3) The two Macs to read/write to each other with password access
4) The iMac to have read/write capabalities over the PC via VSFusion or Bootcamp if possible.
Currently, all three have Internet access via the AEBS and can print on the ethernet printer. Both Macs can see the Bonjour USB printers and print (however they to do not display on the AEBS configuration display utility and neither does the ext HD). The USB ext HD is shown on the iMac desktop and I have access to it, but does not display on the MacBook. I have not checked if the PC sees the external HD and it really does not matter if it ever does, although it would be nice.
I am hoping that there is some standard configuration that I can "cut and paste" that is generally used to allow a home network to share resources while still being secure.
Any advice and help is greatly appreciated.
Thanks,
Andrew

Andrew,
What you would like is fairly complicated so this will probably be a lengthy post, but hopefully I can assist you.
As others here have pointed out, networks can vary widely, but the best networks have one element in common: planning. The first thing you need to think about is how you would like all of these systems to cooperate. For instance, do you want one of the machines to serve files to the others and be a central repository, or are you just interested in having them share documents on occasion so that you don't have to carry around, say, a USB key all the time? That said, here is a basic list of things I think you should look into.
1. Network Basics
First step is to get your local network set up. I'd go for WPA or WPA2 wireless security as they are relatively strong standards and you can use human-readable passwords. Additionally, unless you have an explicit need for someone outside your network to initialize a connection (Windows' RDP for instance), do not allow any passthroughs or port redirects on your AEBS.
2. Network Topology
Decide how you want computers and networked devices to identify themselves and their relative locations in the network: in short, do you want static ip's or dynamic ip's? Most of the time, static IP's can be assigned on a DHCP router, the trick is to assign the statics higher than your number of devices (or lower on some routers - for instance Linksys routers start DHCP at 192.168.1.100 but you could have statics from 192.168.1.2 to 192.168.1.99). For instance, it is impractical to set a laptop to static because I'm often in coffee shoppes and other environments that assign via DHCP; on the other hand, it's a good idea to have a printer be static so that you always know where to find it. So, I have 10.0.1.x network (default on AEBS), and the printer is 10.0.1.24, since the likelihood of my encountering an IP conflict with 4 computers on the subnet is virtually zero. If you configure a static device behind your AEBS, defaults are usually
Default Gateway 10.0.1.1
IP Address 10.0.1.(your choice)
Subnet Mask 255.255.255.0
3. File-sharing.
3a) Mac OS X has a built-in SMB/CIFS (Windows file & printer sharing protocol) client, and a basic SMB [samba] server can be enabled in the sharing preference panel (enable file and/or printer sharing). Windows XP can use these shares, but must authenticate. For that reason, you may not be able to see your shares in the Network Places browser, however you should be able to get to them by mapping the network drive (tools menu) or executing RUN with \\computer.name\share.name. You will then be able to type in your credentials. I would also suggest relatively simple names for the Macs in question (set in Sharing preference pane). Typing Andrew's-iMac-G4 in every time you want to find it will get irritating after a while to say the least, especially if you need to troubleshoot.
3b) The reverse works similarly. You can Connect to Server... from Finder to get to the Windows shares. To do this you must have Windows File and Printer sharing enabled (most easily through the Network Setup Wizard in Control Panels - Use Classic View). It's really easy if your account names and passwords are identical on the Mac and PC, because when loading user profiles, the Mac will generally automatically try to authenticate against the Windows machine with your Mac logon credentials. (Windows seems to do this against the Mac as well) You can write an Applescript or there are some PLIST modifications you can make to mount Windows shares at login.
4. Printing
I'm not exactly sure what you had in mind here since I'm not sure what's connected to which computer or directly to the network. If it is possible, I personally find putting my printers directly on the network to be the easiest thing. Especially if printing large PDF or graphics files, the spooling on the host system can really slow the computer down, and slow down printing. For example, I used to have a laserjet on a Windows box and had to print a very large file. Going through a Win print server, it only printed a page every 30 seconds, but when I got a jetdirect adapter, the whole thing was done in under two minutes. If you have HP Printers, I would recommend the jetdirect print servers (I have used with both a laserjet and a supposedly unsupported color inkjet).

How do i configure my airport to work with my other wireless router

how do i configure my airport to work with my other wireless router? I want to be able to listen to itunes through my speakers wirelessly.

Please check out the following Apple Support article for details on the many methods to use an AirPort Express for iTunes streaming.

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

How to check whether transport path exist between two systems in sld??

Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.

<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S

How to Check WET610N is working?

I called and spoke to a Cisco representative and they told me all I have to do is get a WET610N and WAP610N in order to get my wireless situation set up.
We currently have the E3000N (which everyone said was the strongest router, but doesn't even go 300ft) it is connected to our cable modem.
It sends out it's wireless signal, and the Cisco representative told me if I get the WET610N to act as a wireless bridge, and then the WAP610N to act as a wireless access point we should be able to extend the wireless range.
I've set up the WET610N and the WAP610N. It claimed that everything was working correctly, that the wireless bridge was set up, etc.
I created a second SSID and it appeared to work. Then we moved the WET610N and WAP610N to their location in order to extend the range and it stopped working!
I know for a fact we are not out of the wireless range of the E3000N as I am using it to post this. The second SSID coming from the WAP610N is broadcasting and the signal is strong, but when I try to connect it says it has limited internet access, or no access.
So is something wrong with the WET610N in receiving the signal? Or is something wrong with the WAP610N? How can I check if they are working? Do I have to reconnect them to the E3000N to check? Is there a surefire way to make sure it all works?

How you have configured WET and WAP? have you setup a static ip on them or it is configured as dynamic ip? If you have setup a static ip then on your computer open the command prompt window and ping the ip address of the bridge and check if you are getting replies, If you are getting replies then the bridge is configured properly, then you need to check the settings for your AP.

How to check configuration?

Similar Messages

Maybe you are looking for