How to check COPA Data in R/3

Hi Experts,
There are some entries of COPA posted in BW are incorrect. Business wants to know who has posted these entries in R/3 . Could you please suggest me some transactions codes of R/3 for COPA related data so that I can investigate it.
The problem is with Profit Center and Sales District Data there are some extra entries for Profit centers not relevant to the Sales District assigned.
Reward points would not be a problem.
Thanks in advance.
BW USER

Hi,
Your records are in BW ?????do you have the CO_PA documnets number with you.???
then go to KE24 or KE25 as mentioned and here you can give the CO-PA doc number you will get a list of records just double on the recprds and it will take you the respective COPA docs....andhere check what is enetry maintained in the sales district field...and you can verifye whether the postings are correct or not.
These transactions are fast enough then the SE12 and RSA3.
try to give as much selection as possible when looking in KE24.
Thanks

Similar Messages

  • How to check the data of an archived table.

    I have archived a table created by me. I have executed the write program for the archiving object in SARA. Now how can check the data of my archived table.

    Hello Vinod,
    One thing to check in the customizing settings is your "Place File in Storage System" option.  If you have selected the option to Store before deleting, the archive file will not be available for selection within the delete job until the store job has completed successfully.
    As for where your archive file will be stored - there are a number of things to check.  The archive write job will place the archive file in whatever filesystem you have set up within the /nFILE transaction.  There is a logical file path (for example ARCHIVE_GLOBAL_PATH)where you "assign" the physical path (for example UNIX: /sapmnt/<SYSID>/archivefiles).  The logical path is associated with a logical file name (for example ARCHIVE_DATA_FILE_WITH_ARCHIVE_LINK).  This is the file name that is used within the customizing settings of the archive object.
    Then, the file will be stored using the content repository you defined within the customizing settings as well.  Depending on what you are using to store your files (IXOS, IBM Commonstore, SAP Content Server, that is where the file will be stored. 
    Hope this helps.
    Regards,
    Karin Tillotson

  • How to check the date and time when a material is blocked

    Hello,
       Please tell me how can i check the date and time when a material is blocked or unblocked.
    Regards,
    Priyanka

    Hi Pryianka,
    Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
    If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
    If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
    BR
    Csaba

  • How to check the date is initial in the calculated keyfigure

    Hi,
    While calculating the difference between the two dates , i need to check the date is having the values or not in the calucluated key figures .how to achieve this .
    number of days = delviered date -  creation date
    All the dates are key figures
    Regards,
    Raj

    Hi there,
    It depends on what you want to retrieve.
    If you have this:
    day 1 - day 2
    If day 1 is initial, you'll have day 2 as the result of the difference which is correct. If in the other hand day1 is initial you'll have - day 2 as the result. So you just need the ABS() formula to give the absolute value of the difference.
    What exaclty do you want to achieve? only do the formula when both day 1 and day 2 have values? Retrieve always a positive value of the formula no matter if day 1 is initial or day 2 or both?
    Can you give a complete example with values of what's happening and what do you pretend to achieve?
    Diogo.

  • How to Check UPL data collection at Solution Manager

    Hello,
    I had activated UPL data collection as per the document How to Guide –SAP Custom Code Management Usage and Procedure Logging.
    I can check UPL data in my managed system by Report “/SDF/SHOW_UPL"
    But I am not able to get the same data in Solution Manager by this same repot (/SDF/SHOW_UPL).
    When I run this report in solman it show me only Solution manager data.
    How I can read Manage System data in Solman? And what are the check point (for both Solman and Manage system) I need to check for ensuring my UPL date collection is working fine.

    Set up CCLM and the custom code setup and you will be able to view UPL data that way,

  • How to check loaded data Master Data Hierarchy?

    Hi
    Please let me know the way of checking available data which was loaded into the Master data hierarchy objects.
    when i go into that particular infobject's hierarchy it is showing maintain hierarchy in its infoprovider execute function colum. How to see the data of it. coz i have to cross check whether the data has been loading/not.
    Thanks

    Hi,
    For Example:
    If its a 0Customer Info Object , then in the 0Customer hierarchy table data can be checked in the H - table.
    That is in the 0Customer info object in the Hierarch Tab there will Hierarchy table /BIC/HCUSTOMER when you double click it you can see the data loaded to it.
    Regards,
    Adhvi

  • HT3939 how to check manufacturing date of iphone 4s

    how to check the manufacturing date of iphone 4s

    Hi
    Please check the below links
    www.s-url.ro
    http://www.chipmunk.nl/klantenservice/applemodel.html

  • How to check manufacturing date of Z2?

    Hello, so the title pretty much sums it all. On earlier xperia phones you could check it under the battery, with xperia Z it was written on the back at the bottom but what about Z2? How to check it's manufacturing date?
    Solved!
    Go to Solution.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    This label can be found in the MicroSD-slot, check the following link:
    http://userguide.sonymobile.com/referrer.php?region=en&product=xperia-z2#IMEI-number.html
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How to enhance copa data source.

    Hi,
    I have to enhance copa data source 1_co_pa300beka_o01. Actually I have to add one field vstel from VBAP table to this data source.
    Can you tell me full procedure about enhancing data source ?
    It can not be done directly. I think i have to delete and re-create data source in R3 system.
    For this i have to do all thing in KEB0 .
    Am i right?
    So please tell me full procedure to enhancing copa data source also tell me if i enhance copa data source , which type of problem can be come at BW side.
    Thanks
    Devesh Babu

    I'm not sure if we can enhance CO-PA datasources. Even if you can enhance, whenever there are changes to the Operating concern in R/3 you would have to delete and re-create the datasource. While doing this you would have to re-do the appends again. DS 2lis_11_VAITM extracts data from VBAP. Check if the datasource already brings this field. Otherwise enhance it. In the CO-PA dataflow lookup the DSO which has VBAP data from the datasource and get the necessary field.
    Other option is to ask functional folks to add the field to the CO-PA operating concern.

  • How to check the data in a temporary table

    Hi,
    A procedure inserting data into a temporary table , data exists in the table now. so, how to see the data from the temporary table. Is it possible to see from the sqlplus by selecting, right now i'm not getting any data. .thanks Bcj.

    If you are referring to Global Temporary Tables, then the only way to see the contents of the table are to select from the table while connected to the same session that inserted the data into the GTT.
    Please note however that there is not a 1 to 1 correspondence between sessions and users (shcemas). A user may be connected to 1 or more sessions, but it is only the session that inserted the records that will be able to view the records.

  • How to check PSA data size for a particular datasource

    Hi All,
    Please let us know how to check the size of a PSA for a particular datasource in BI 7.0.
    But i am using DB02OLD transaction code to identify the size of the change log table or active table of a DSO.

    Hi,
    I'm not sure but i think that with the tablename you can find the size in the DB02.
    To know the PSA Tablename, double click on datasourse > go to > Tecnical attributes
    There you have the name of the PSA Table.
    Regards,
    Dani

  • How to check the date of an Oracle session

    hello
    How to check how long a session was opened?
    thx

    set lines 100 pages 999
    col ID          format a15
    col osuser     format a15
    col login_time     format a14
    select      username
    ,     osuser
    ,     sid || ',' || serial# "ID"
    ,     status
    ,     to_char(logon_time, 'hh24:mi dd/mm/yy') login_time
    ,     last_call_et
    from     v$session
    where     username is not null
    order     by login_time
    Regards,
    Andy Barry

  • How to edit copa data source or change delta method.Need t-code/procedure

    Hi gurus,
    I have a copa extractor in production.The copa extraction is costing based.
    I need to get an extra field from CE1**** table. when i go to KEB0 and display , i see my required field under the chracteristics from segment table. It is unchecked.
    I want to know the transaction where i can go and  edit the datasource to check that field and bring that data in.
    I tried going to T-code KEDV. But i couldnt figure out what to do there?
    I also tried deleting and recreating the datasource, then i am able to check that field. The problem is earlier existing data source used to say,
    Delta Method     Time Stamp Management in Profitability Analysis
    now it says
    Delta Method         Generic Delta.
    how do i change the delta method from generic delta to Time Stamp Management in Profitbility Analysis. During creation in KEB0 it doesnt give any option to change.
    and what exactly is the differnce between both delta methods?
    plz post your inputs.
    Thanks in advance,
    > Points will be assigned for inputs
    Message was edited by:
            ravi a
    Message was edited by:
            ravi a

    Hi Ravi,
    I would expect you are communicating to your users that you will need some downtime for you to change this.  To add characteristics to COPA you actually have to first the delete the datasource in KEB0 then re-create the datasource.  I would work with your CO-PA config team to get the T-Codes necessary to assign those objects to PA.
    Please reference OSS note 392635 for further reference on your CO-PA timestamp question.  This should answer your questions here.
    Pls. assign pts if this helps.
    Thanks,
    -Alex

  • How to Check the date and get the latest date?

    Hi Everyone,
    I've an internal table which holding few records which contain date field. How I can check this internal table by getting the record which contain "latest date" only? Kindly advise. Thank you.
    eg:
    I should only get the record which contain lastest date. (eg: I should picked up Record3)
    Table i_test
    Field 1              Field 2(date)
    Record1            20090322
    Record2            20090101
    Record3            20090601
    Moderator message - Please search before asking and do not ask basic questions - post locked
    Edited by: Rob Burbank on Jun 17, 2009 9:21 AM

    Its easy...sort the internal table using the field i.e. date field in DESCENDING manner
    SORT gt_final BY date_field DESCENDING.
    Read the first entry of the internal table..it will have what you require
    READ gt_final INDEX 1.

  • How to check installation date

    Hello,
    i am wondering how i could easily check the installation date of mac os x (in this case leopard)
    Is there a special function implemented to check this or are logs (searched there already, but the log rotation wasnt helpful here) and the creation date of specific files my only chance ?
    Would be great to learn where to check to get this information
    Best regards
    fidel

    Thank you Barney,
    that is exactly what i was looking for.
    Thumbs up.
    Best regards
    fidel

Maybe you are looking for