How to check delta field in EDIDS table

Hi,
I have to create generic delta based on EDIDS (Status record) table. Since there is lot of data so i have to set delta point for this data-sources.
Could you please help to find delta field in this table?
Thanks & Regards
Devesh babu

Seems like there is no other fields which an be relevant delta.
check docnum is possible to use as numeric pointer.
Numeric pointer can be used when table allows for entering new records only.
if there is no delta relevant field, go with full load every time.
Use dso inyour data flow. so that we can introduce delta between dso to cube.
data flow like this
data source---> Every time full load to PSA--->You use delta or full load. it pulls latest request which is full to dso---> dso to cube, load delta dtp.
Need to delete the psa request before every load.
thanks

Similar Messages

How to check which fields of a table are changed

Hi
I have a FM in which i pass VBAK and VBAP. I store records of table in internal tables and update the values during execution and at the end of this i have to cpmare VBAK and VBAP with internal tables to chcek which field value is changed in both VBAK and VBAP. Its not possible to check all fields bcause there are so many fields in VBAK and VBAP. Can any body help me.
Thanks and Regards
Aditya

Hi,
Try using where used list.
click on the field. pree F1. select Technical Info from the pop-up. then from the field data, double click one the field name. it will navigate to the table/structure where the field is used. double click on the field there or
press CntrlShiftF3.
It will give you the where used list.
Pls reward poins if useful.
Regards,
Chandru

How to pick the fields of ABC table in Payslip

How to pick the fields of ABC table in Payslip, So i want to add the calender days(absent days) in my payslip

You can do it through PE51_CHECKTAB
Yogesh

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How to Identify Delta Field in DS

Hi Gurus,
1. My understanding is if a field in datasource(DS) is
set as Delta, whenever that field value changes in DS
then the delta process will initialize. (please correct
me if i am wrong) Do we need to replicate everytime
the field value is changed so that the value is updated
in the data target, if so is there a process to
automate it...
2. Can someone tell me how to identify Delta Field in a
DS for example in 0FI_AP_4. i tried to search for it in
help.sap.com but all i could find is that 0FI_AP_4 is
delta capable but couldn't find which field is set to
delta...
Thanks,
SM

Sri Mal,
   1. Yes, there should be one field enabled enabled for delta.
   2. no need to replicate every time when ever data changes. we need to replicate when DS changed. i mean not business data, if meta data changes we need to replicate the DS. let us assume you made one field for selection and one field as hide. then you need to replicate this.
3. OFI_AP_4 is standard DS. you can't enable delta for this one if SAP didn't provide that. we need to active data for this. in the SAP Documentation you can see whether it is delta capable or not.
comming to 0FI_AP_4, IT IS DELTA CAPLABLE.
Hope this helps.
All the best.
Regards,
Nagesh Ganisetti.

How to check duplicate entries in internal table??

Dear Friends,
How to check duplicate entries in internal table??
Exp: In my internal table if I am having the same records more then ones then I need to print the error message, here I am using steploop for selecting the values from screen, and the values are coming into my internal table if user enter the same value more then ones I need to print the error message.
Thanks,
Sridhar

Hi,
After storing the data into internal table say ITAb, move the data into another internal table.
t_dup[] = itab[].
LOOP AT itab.
    count1 = count1 + 1.
    itab-count1 = count1.
    MODIFY itab.
ENDLOOP.
LOOP AT t_dup.
    count2 = count2 + 1.
    t_dup-count2 = count2.
    MODIFY t_dup.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab.
LOOP AT t_dup.
    record_dup = 'N'.
    READ TABLE itab WITH KEY count1 = t_dup-count2.
    IF sy-subrc = 0.
      record_dup = 'Y'.
    ENDIF.
    IF record_dup NE 'Y'.
      t_dup-message = 'DUPLICATE ENTRY'.
      t_dup-flag = 1.
      MODIFY t_dup.
    ENDIF.
ENDLOOP.
Use this sample code.
Reward pts if it is helpfull.
Regards
Srimanta

How to update the field ZLSPR of table BSEG

HI Friends,
Can anyone tell me how to update the field ZLSPR of table BSEG? I've a 700 line abap program and I should include some logic in this program to make an entry into BSEG-ZLSPR. Is there any FM/BAPI available? Is BDC a healthy approach?. My team lead do not want me to use UPDATE statement....please help.
Thanks in advans,
Varsha.

Hi,
Hi ,
You will need to group that radiobuttons so that SAP knows they are linked together. To do this using the grahical layout editor simply select all the radiobuttons and then right click on them, Now choose define group. Once you have done this you should not need any of the "clear" or "='X'" statements SAP should control it all for you.
hope this helps
Reward if found helpfull...
Venkoji Babu.

Reg : delta field for vbbe table while creating generic extractor

hi
i want to know which field should i use to do delta from vbbe table.
do i have to ask my functional consultant for what field should ibe using or
should i decide on my own
your answer would be defintely rewarded
thanks a lot
pallavi

Hi,
I would suggest you to create a new sales document and try to find out how does it the new entry is entered in VBUK, VBUP, VBEP and VBBE tables. Also, try to change / modify and delete existing record and see the changes in the table. You need to check which date fields or any deletion indicator is set / modified or not. Do all this one by one and see the changes in the tables. Also, all these changes will be logged in change log table such as CDHDR and CDPOS. This will have all the history of changes for one sales document. Once you identify all this then it will be very easy for you to identify the delta fields. The other way is to speak to functional consultant and ask him how all these tables are affected when you change / modify / add / delete records.
Hope this helps.
PB

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

How to make the fields of the table mandatory while creating new entries..?

Hi,
I have created a new Z table which has 6 fields. All the 6 fields are KEY fields and all are of CHAR type. I have generated the table maintenance generator for the same. My requirement is all the fields should be MANDATORY while creating the entries. No field should be BLANK.
When creating the new entries in the table, even if I don't give any values to some of the fields, it is saving the entry. But, it shouldn't happen like that. If any of the field is kept blank, it should not allow the user to save the entry. Can someone tell me how to approach this. Will there be any settings while creating the table which takes care of this.
I read somewhere that this can be done using the Table EVENTS. Can someone tell me what is the code that we should write there in the Events which prevents the user from saving the blank fields. While writing the logic in the events, how to check whether the particular field is BLANK or not. Will the values be stored in any internal table kind of thing..?
My table name is ZCRF_TAB and the fields are FLD!, FLD2, FLD3, FLD4, FLD5 & FLD6. Can someone provide me sample code for my requirement. Thanks in advance.
Best regards,
Paddu.

Hi,I think u have generated Table Maintainance Generator, goto Environment->Modifications->Events
Select appropriate option by using F4,I think value 05 is appropriate for u r requirement.Enter From routine name.Dbl click on the routine.
Write the appropriate code like:
If ZTABLE-FIELD1 is initial.
Message (E000) with "Fill all the manadatory fields".
Thats it.Just look at the following docu with screenshots,by this understand how u can use Table Events:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards,
Rock.

How to update ABSKZ field in the table EKPO

Hi
Is there any way to update the rejection indicator (ABSKZ) field of table EKPO?.
I am looking at BAPI_CHANGE_PO FM, But it does not have ABSKZ field in the item structure BAPIMEPOITEM.
Do I need to extend the BAPI structure with ABSKZ field ?
Regards
Raj.

Hi
To extend BAPI_PO_CHANGE for EKPO-ABSKZ field , we have to add field in the structure BAPI_TE_MEPOITEM to pass it to EXTENSIONIN. As ABSKZ field already availble in the EKPO it is not allowed to add ABSKZ in the structure BAPI_TE_MEPOITEM. it is throwing below error message.
Field ABSKZ in table EKPO is specified twice. Please check
Since it is not Z field and also not availble in the structure BAPIMEPOITEM not sure how to update ABSKZ field in the EKPO table.
Please advice.
Regards
Raj

How to deactivate the fields in a table control of a standard screen

Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

How to check if a DSO Active Table is being used in any look-up's?

Hi Gurus,
We have a DSO that is being loaded on a weekly basis. Now this DSO is being loaded right from the time our project went live. There are no reports built on top of this DSO and the DSO is not being used as a Data Mart i.e. it doesn't feed any other DSO's or InfoCube's. Also this DSO is not being used in any MultiProviders.
So the only sensible reason for using this DSO that we can think of is that the data from this DSO is being 'looked up' by some other DSO's or InfoCube at run-time. So Is it possible to check if the active data table of an DSO is being ;looked up' at run time by some other data loads? I already tried using an 'Where Used List' on the active data table of the DSO, but it didn't show any results.
Thanks
Arvind

Try the following:
Check the table RSAABAP in SE16, you can search the technical name of DSOs active table in field EDIC.
You get all Code-IDs, where this table is used in ABAP coding.
In RSAROUT you can check, which code-type it is.
Now you know, if the DSO is used in any routines.
Hope this helps.
Regards
Tobias

How to make screen field enable when table control gives an error

Hi,
I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
How to make the other parameter enable when table control throws an error.
Regards,
Jaya

Hi Gobi,
Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
Thanks
Jaya

How to check Le field is missed?

Hi,
When the protocol is T=1, I have problem with Le field.
When the card recieve Case 2 format command without Le(like '00B2010C' - Read Record) , how to check the Le field is missed?
I tried below but not working.
if(APDU.getProtocol() == APDU.PROTOCOL_T1 && apduBuffer[ISO7816.OFFSET_LC] != 0 && apdu.setIncomingAndReceive() != 0){
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
I look forward your feedback.
Many thanks in advance!
글 수정: user11280436
글 수정: user11280436

Hi,
You should check the response from apdu.setOutgoing() to see what value was passed in as Le. This will return the number of bytes expected by the terminal.
You only need to call apdu.setIncomingAndReceive() if the INS expects data. You can also use it to ensure that there was no data passed in (returns 0).
Cheers,
Shane

How to check delta field in EDIDS table

Similar Messages

Maybe you are looking for