How to check DSP modules installed status

Dear All,
How will I check up the DSP modules installed status in cisco 7206 router.
How can i know whether those DSP modules are installed with
2 Channelized E1/PRI port(s) or in the chasis itself.
Thanks
Shibu

Dear Nick,
Please find the sh voice DSP.
-HQ#sh voice dsp
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
C549 010 01 g729r8 4.1.41 busy idle 0 0 1/1:15 30 0 6823409/5935
157

Similar Messages

How to check Internal, Concurrent Manager status in Oracle Apps R12 from fr

Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end and how to start them.

Richa wrote:
Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end Concurrent Processing - Concurrent Manager Generic Platform Questions and Answers [ID 105133.1]
and how to start them1) Using adcmctl.sh (from the backend)
2) Using Activate button (from the front-end) -- http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#4334248
Thanks,
Hussein

How can check which patch install in oracle 10g

hi experts,
i have use oracle 10g , i hv patch information but how can check which patch install ?

Run following command , it will give you list of patches installed on Oracle Home
cd ORACLE_HOME/OPatch
opatch lsinventory
For patchset and CPU patch , check/query DBA_REGISTRY_HISTORY
Virag

How to check oracle properly installed or not?

Hello Friends,
How to check oracle properly installed or not. cause during installation time the person who installed faced many problems. we have RISK base IBM p5 Series server and Oracle 10g RAC.
i want to check installation made properly or not.
Thanks,
Nikunj Patel

Installation for RAC environments means you are not only talking about one single installation, but several installations, and the number of installations and checking processes depend on factors such as the clusterware you are using, if you are using the Oracle clusterware or the proprietary clusterware, if you are using a separate oracle home to install the ASM or if you are using the same oracle home for both, the ASM and the RDBMS.
First you must ensure you have installed all prerequisites according to your platform, i.e. patches, packages, kernel parameters, etc. which are listed at the install guide corresponding to your platform. Then you should use the cluvfy (cluster verifier tool) to check if the different install phases are properly installed
The most critical and most of the times, problematic installation phase is the clusterware. So you should specify if you installed the Oracle clusterware or the proprietary clusterware. In a RAC environment if your clusterware is not properly installed, most probably you won't have a running RAC, so if your environment is functional there you may have high probabilities that it is OK, but to make sure, launch the cluvfy tool.
The cluvfy tool verifies the process since the beginning and it ensures your environment meets the required minimum requirements to be at an operational level, it checks the pre/post install phases for the clusterware, pre/post install of the rdbms, and it is launched from the OS. It can be obtained as a standalone product or you can use the one found at the clusterware Oracle Home. For further references on this tool I suggest you to read this
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for AIX
Part Number B14201-04
~ Madrid

How to check if XI installed

Hi,
I know this is a basic question.
Our basis guys installed, BI of NW2004s, how to check if they have installed XI.
Any links, documents in this direction would help me.
Thanks,
-Naveen.

Hi,
For the Java part of xi, you use this URL:
http://<host>:5<nn>00/rep
with <host> = your XI server hostname
with <nn> = your XI system ID (e.g 01)
Note: no user is needed to display this Java page.
For the Abap part, just use your SAP Logon with both parameters: <host> and <nn>. If you can enter a user and a password, that's means that ABAP part of XI is installed.
Mickael

How to check whether KMC installed?

Please tell me how to check that KMC is installed on the portal or not ?
Pls help me.

Hi Karan,
You can check all the installed components at http://<server host name>:<port>/index.html
Here under System Information, you will find all installed components.
Thanks,
Ami.
Reward for helpful answer.

How to check latest patch installed?

Hi ,
how to check which is the latest patch installed on oracle on window server?
Thanks,

sure...go to ORACLE_HOME/Opatch and run opatch lsinventory
> opatch lsinventory
Invoking OPatch 10.2.0.4.3
Oracle Interim Patch Installer version 10.2.0.4.3
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /u01/app/oracle/product/10/db
Central Inventory : /u01/app/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.4.3
OUI version : 10.2.0.4.0
OUI location : /u01/app/oracle/product/10/db/oui
Log file location : /u01/app/oracle/product/10/db/cfgtoollogs/opatch/opatch2012-03-15_12-14-59PM.log
Lsinventory Output file location : /u01/app/oracle/product/10/db/cfgtoollogs/opatch/lsinv/lsinventory2012-03-15_12-14-59PM.txt
Installed Top-level Products (2):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.

OBIEE11g: How to check current environment installed/applied patches?

Hi all,
Does anyone know how to check current OBIEE environment installed/applied patches? I don't have the patch installs anymore and now trying to figure out how to view them. My current environment is OBIEE 11.1.1.5.
Thank you in advance!

To check Patches applied, do changes where ever required.
Use this command
cd $FMW_HOME/Oracle_BI1
opatch lsinventory|grep applied
In Windows from C:\OFM\Oracle_BI1\OPatch
Use this command
opatch lsinventory applied
opatch.bat lsinventory –oh <EPM_ORACLE_HOME> –jdk <MIDDLEWARE_HOME>/jdk160_21
To check the version login to Answers-> Administration you can find the version a top use weblogic user to see.
Appreciate if you mark as correct/helpful

How to get to Factory Installed status?

Hello,
Mine is a MBA.
Do I have to boot to my original OS DVD to get back to factory installed status on my Mac Book Air?
Regards

Actually, that's a good question.
You have two choices. At the end of the installation process, you can shut down the Mac instead of going through the user registration and account process - that means the new owner will be able to set their account up just like factory.
But that means you won't be able to install the Apps DVD. To install the Apps DVD you'd have to go through the registration screens...
I guess you have to make the choice yourself.
\[By the way, the restore system you mention only happens on Windows machines that have been specially prepared with a restore partition, it's not the default way Windows works\]

How to check Temp/Power supply status like V210 in T2000

Hi
As I would like to know what is the command to check the Power Supply Status/Temp Status like V210 in T2000. I tried with /usr/platform/sun4v/sbin/prtdiag v command like V210 but it disaplys only below details.
System Configuration: Sun Microsystems sun4v Sun Fire T200
System clock frequency: 200 MHz
Memory size: 8184 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation Status
0 1000 MHz SUNW,UltraSPARC-T1 on-line
1 1000 MHz SUNW,UltraSPARC-T1 on-line
2 1000 MHz SUNW,UltraSPARC-T1 on-line
3 1000 MHz SUNW,UltraSPARC-T1 on-line
4 1000 MHz SUNW,UltraSPARC-T1 on-line
5 1000 MHz SUNW,UltraSPARC-T1 on-line
6 1000 MHz SUNW,UltraSPARC-T1 on-line
7 1000 MHz SUNW,UltraSPARC-T1 on-line
8 1000 MHz SUNW,UltraSPARC-T1 on-line
9 1000 MHz SUNW,UltraSPARC-T1 on-line
10 1000 MHz SUNW,UltraSPARC-T1 on-line
11 1000 MHz SUNW,UltraSPARC-T1 on-line
12 1000 MHz SUNW,UltraSPARC-T1 on-line
13 1000 MHz SUNW,UltraSPARC-T1 on-line
14 1000 MHz SUNW,UltraSPARC-T1 on-line
15 1000 MHz SUNW,UltraSPARC-T1 on-line
========================= IO Configuration =========================
IO
Location Type Slot Path Name Model
IOBD/NET0 PCIE IOBD /pci@780/pci@0/pci@1/network@0 network-pciex8086,105e
IOBD/NET1 PCIE IOBD /pci@780/pci@0/pci@1/network@0,1 network-pciex8086,105e
IOBD/PCIE PCIE IOBD /pci@780/pci@0/pci@9/scsi@0 scsi-pciex1000,56 LSI,1064E
IOBD/NET2 PCIE IOBD /pci@7c0/pci@0/pci@2/network@0 network-pciex8086,105e
IOBD/NET3 PCIE IOBD /pci@7c0/pci@0/pci@2/network@0,1 network-pciex8086,105e
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0,1 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0,2 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0,3 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/isa@2 isa
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/usb@5 usb-pciclass,0c0310
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/usb@6 usb-pciclass,0c0310
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/ide@8 ide-pci10b9,5229
========================= HW Revisions =======================================
System PROM revisions:
OBP 4.25.12 2008/03/23 13:27
IO ASIC revisions:
Location Path Device Revision
IOBD/SAS-SATA-HBA /pci@780 SUNW,sun4v-pci 0
IOBD/SAS-SATA-HBA /pci@780/pci@0 pciex10b5,8532.bc 188
IOBD/SAS-SATA-HBA /pci@780/pci@0/pci@9 pciex10b5,8532.bc 188
IOBD/IO-BRIDGE /pci@7c0 SUNW,sun4v-pci 0
IOBD/PCI-SWITCH1 /pci@7c0/pci@0 pciex10b5,8532.bc 188
IOBD/PCI-BRIDGE /pci@7c0/pci@0/pci@1/pci@0,2 pciex8086,341.9 9
IOBD/GBE0 /pci@780/pci@0/pci@1/network@0 pciex8086,105e.108e.105e.6 6
IOBD/GBE0 /pci@780/pci@0/pci@1/network@0,1 pciex8086,105e.108e.105e.6 6
IOBD/GBE1 /pci@7c0/pci@0/pci@2/network@0 pciex8086,105e.108e.105e.6 6
IOBD/GBE1 /pci@7c0/pci@0/pci@2/network@0,1 pciex8086,105e.108e.105e.6 6
IOBD/SAS-SATA-HBA /pci@780/pci@0/pci@9/scsi@0 pciex1000,56.1000.1000.2 2
I am interested in getting the same o/p which also gives status on Fan Status/Power Supplies etc.
Please let me know do we need to upgrdae the OBP Version else ?
Thanks
Rajan

Hi
In thee same ref. I would like to know the comand from OS/Bash prompt so that I can write the script in which it will compare the values and alert me accordingly.
In case sc> prompt there is commnand "show environment" which give all details.
Thanks
Rajan

How to check parallel work items status of a workflow

Hi Experts,
In a standard workflow, there is a task which can create a workitem to different agents by agents determination.
As per standard workflow, once the workitem have been opened by any user, the same workitem will disappear from all others inbox. Now there is a need of changing the workflow to perform the task by everyone. For this I am using BLOCK step with parforeach. In the definition, workflow completion is doing based on document status. If any one processed the task, then the doc status will change and then workflow will be in complete state. Now along with this workflow, all other unprocessed workitems are getting closed automatically. So there is any way/function module to check the status of all workitems of a workflow to check same before workflow completion step.
Thanks in advance...
Regards,
Suresh

Hi Suresh
In the definition, workflow completion is doing based on document status. If any one processed the task, then the doc status will change and then workflow will be in complete state.
How is this achieved in your copy workflow? Are you listening to an event in the workflow which gets triggered when the doc status is changed? Are you checking a condition? What is the technique followed to check that status and complete the workflow?
Depending on this, there can be different ways to bypass it till the last approval.
Regards,
Modak

IPod frozen than working... how to check it's health status?

A friend of mine gave me a 20GB classic iPod, it was supposed to be broken, took it home, connected to the usb cable and the icon to get to service it showed up, nothing else to do, no way to access diagnostics, nothing nothing nothing.
Now, connected again to my old Dual MDD it mounted on the desktop and seems to work, what and how do I check its health status?
It would turn very useful for me to have this thing to work so much that I already thought, in case it was the disc, to change it but now how do I get to make sure it doesn't fail again?
Could it be a battery problem?
thanks all for your attention
Giovanni
<Edited by Host>

BTW, I did SMC and PRAM reset and it was the same in Lion when I bought the MBPR. It was working for days until I started noticing disconnect and reconnect iPhone 4S.

How to check JVM is instaled - for 32-bit to 64-bit upgrade

Hi,
I need to upgrade my 9205 oracle instance from 32-bit to 64-bit. I intend to follow Metalink Note:62290.1. But it says its to be used if there's no JVM installed. How do I ensure that?
Thanks,

Hi,
you could use the database configuration assistant(dbca) to check:
choose configure database componenents and navigate to your databse and look at what shows up using the standard database components button.
=;-)
Lutz

Can anyone help me: How to check or update my status as SAP Certified Consultant / How to get my SAP Certificate ID Validated. - Reg.

Dear Concern / All,
Greetings of the day !!!
I am an Indian. I have applied / booked for SAP Certification examination through PearsonVUE and the test centre was in Dubai.
I have appeared and cleared SAP Certification Exam in the month of March, 2014 and received my SAP Global Certification which certifies me as "SAP Certified Application Associate" along with the Certificate ID after 4 weeks.
I am seeking support / information / help for the below mentioned:
How or where can I verify my SAP Certification details?
How or where can I validate / update my SAP Certification details?
How or where can I update my status as SAP Certified Consultant?
Where or how can I get SAP Logo?
I would be very thankful for extending your kind support / information / help in this regard.
With Regards and Thanks in Advance
Abhiman Surineni

HI abhiman,
How or where can I verify my SAP Certification details?
Pearson VUE - Authenticate Score Report --- go to this link and give your details and for
How or where can I validate / update my SAP Certification details?
Pearson VUE - Authenticate Score Report --- go to this link and give your details same link
How or where can I update my status as SAP Certified Consultant?
Pearson VUE - Authenticate Score Report --- go to this link and check once .... after 1 month the address which you have for pearson vue and address details of you all your SAP certificates will reach you in 1 month to your postal address.
Where or how can I get SAP Logo?
Previously there is one person names Kenneth , he will issuing the SAP LOGO for certified consultants but now you can contact [email protected] they will issue you the logo if possible
you will get all your documents and certification within short time , so no need to worry ...All the best and Good luck for your SAP carrer.
Thank you.

How to check indesign version installed by Apple Script

Hi Friends,
I want to make an apple script which will check for the version of Indesign installed in the "Applications" folder.
I tried using "exists" function of Finder. But seems something is missing/incorrect.
tell application "Finder"
exists application file "Adobe InDesign CS4" of folder "Applications"
end tell
Please can you suggest.
Thanks,
Abhishek

Hi Niel,
Thanks for your email.
Basically, I need to check whether a user has which version of Indesign on his mac like (CS3, CS4 etc)
Accordingly, I have to create different loops.
I have CS4 installed on my mac but when I run the below
tell application "Finder"
exists version of application file "Adobe InDesign CS4" of folder "Applications" of startup disk
end tell
The result is false.. even though I have CS4 installed. And, if I try
get version of application "Adobe InDesign CS4"
It gives o/p as "6.0.6.622"
Thanks for your help!
Abhishek

How to check DSP modules installed status

Similar Messages

Maybe you are looking for