How to check duplicate invoice

Hi
  How to check the duplicate invoice postings?
Is there is any tcode to check the duplicate invoice postings?
Kindly need your inputs?
-Prabu

Hi
you can download the List of Invoices from RBKP table  usiong SE16 whcih stores the Reference invoice number , if two invoice have similar refernce number then this is aduplaicate invoice. Check the Purchase order to Verify the Same 
Thanks & Regards
Kishore

Similar Messages

  • How to block duplicate invoice posting in MIRO

    Hello,
    How to block duplicate invoice posting in MIRO?
    Regards,

    Hi Niteen,
    In addition to the expert's comment use the note 305201
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=305201]
    Please check and revert.
    Thanks,
    Hrishi

  • How to check Cancelled invoices

    Hi Gurus,
    Can anybody please let me know how to check cancelled invoices in costing. Also please let me know the importance of VBRP table in costing. Thanks.
    Regards,
    S.Sumana.

    HI
    VBRK-FKSTO field can be used to check the cancelled invoices,
    If you mark this field as X  then you can get the list
    Thanks
    Prashant

  • Check Duplicate invoice

    Hi everyone,
    Generally the system currently uses the keys to check for duplicate invoice in FB60 ( vendor number, invoice date, invoice number and invoice amount. MIRO only checks for three keys (vendor number, invoice number, and invoice date).
    Is there anyway where i can change the config for the MIRO to also check the invoice amount.
    Thanks in advance
    Genie

    Hi
    In FI module,for checking duplicate invoice is differ with MM module.When you ticked the flag for refence no. in Tcode OMRDC,system will not check the amount in MM.Otherwise,system will check it.
    Only the Company code, Document date, and Reference fields are configurable in transaction OMRDC  If none are checked, then the system only looks at the Currency, Vendor,and Amount.
    Please also read the following online documentation,
    If you activate the reference document number in IMG,
    Depending on the reference document number entry,the system checks
    as follows:
    1.If you have entered a reference document number,the system checks
    whether the invoice matches in the following attributes:
       Company code                       *
       Vendor                                  *
       Currency                               *        >no amount check.
       Invoice date                           *
       Reference document number   *
    2. If you have "not" entered a reference document number, the system
    checks whether the invoice matches in the following attributes:
       Company code                       *
       Vendor                                   *
       Currency                                *
       Invoice date                            *
       Amount in document currency  <         *!!!
    Depending on the system settings, a warning message or an error message appears if the system finds an invoice that matches all attributes.
    Please also keep in mind:The field Chk double inv(Check for duplicate invoice) must be flagged on the Accounting view in the vendor master record.
    I hope it useful.
    Regards
    Ravinagh Boni
    Rewards me If it useful.

  • Check Duplicate Invoice in FB60 and F-43

    Dear Experts,
    I want to check duplicate invoice in FB60 and F-43. Normally, system only check if company code, vendor, currency, reference no. and invoice date are match. If I only want to check for company code, vendor, currency, reference no. are match except invoice date.
    Anybody can help?

    Unfortunately, standard SAP only allows a fixed duplicate invoice check in F-43/FB60.  Unlike LIV, you cannot configure which fields get checked.
    Use BTE 00001110 (process module) and build a function that reads the MM LIV duplicate invoice configuration (table t169p).  The BTE will be called appropriately for F-43/FB60.  I developed and implemented this a while ago and it works great.
    I hope this is useful.

  • How to check duplicate in a very large table

    How  to  check duplicate  value (say mobile number) in a table  having 50 million records

    I need  to  know whether  the data(Mobile Number)  is  already  there  in  the  table whenever a new  row  is  inserted
    You can also use the MERGE statement and the WHEN NOT MATCHED clause to insert rows only if that value is not there.
    But if you are just checking the one column then a unique index would do it.
    Does that column allow a NULL value?
    Do you care about existing duplicate values?
    If you only want to check NEW inserts then create a UNIQUE constraint and use the ENABLE NOVALIDATE clause:
    http://docs.oracle.com/cd/B28359_01/server.111/b28286/clauses002.htm
      ENABLE NOVALIDATE ensures that all new DML operations on the constrained data comply with the constraint. This clause does not ensure that existing data in the table complies with the constraint.
    That will check new data but leave the old data alone - no performance hit for the old data.

  • How to check duplicate entries in internal table??

    Dear Friends,
    How to check duplicate entries in internal table??
    Exp: In my internal table if I am having the same records more then ones then I need to print the error message, here I am using steploop for selecting the values from screen, and the values are coming into my internal table if user enter the same value more then ones I need to print the error message.
    Thanks,
    Sridhar

    Hi,
    After storing the data into internal table say ITAb, move the data into another internal table.
    t_dup[] = itab[].
    LOOP AT itab.
        count1 = count1 + 1.
        itab-count1 = count1.
        MODIFY itab.
    ENDLOOP.
    LOOP AT t_dup.
        count2 = count2 + 1.
        t_dup-count2 = count2.
        MODIFY t_dup.
    ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM itab.
      LOOP AT t_dup.
        record_dup = 'N'.
        READ TABLE itab WITH KEY count1 = t_dup-count2.
        IF sy-subrc = 0.
          record_dup = 'Y'.
        ENDIF.
        IF record_dup NE 'Y'.
          t_dup-message = 'DUPLICATE ENTRY'.
          t_dup-flag = 1.
          MODIFY t_dup.
        ENDIF.
      ENDLOOP.
    Use this sample code.
    Reward pts if it is helpfull.
    Regards
    Srimanta

  • ERS does not check duplicate invoice check

    Hi there,
    We have all the vendors in the vendor master set up with duplicate invoice check on. However this does not work during MRRL process.
    Any sugegstions, information is greatly appreciated.
    Thanks,
    Gajanan

    Hello Gajanan,
    If you create an invoice with transaction MRRL (ERS) then this invoice
    will be created automatically in the background (not online).
    Unfortunately I have to inform you that the function 'Duplicate
    invoice check' is not implemented for ERS. This check was primarily
    written for the online transactions, like MIRO.
    A possible solution to this issue is contained in  note
    48121 which describes how you can create your own validation user exits
    in the FI interface (function module ckmv_ac_document_create). In such
    an user exit you can implement your own coding, for example the double
    check for the invoices:
    the following
      CALL FUNCTION 'MRM_FI_DOCUMENT_CHECK'
        EXPORTING
          i_bukrs                = i_bukrs
          i_lifnr                = i_lifnr
          i_waers                = i_waers
          i_xblnr                = i_xblnr
          i_bldat                = i_bldat
          i_wrbtr                = i_rmwwr
          i_blart                = i_blart
        EXCEPTIONS
          invoice_already_exists = 1
          OTHERS                 = 2.
    will be called in the validation user exit and if the sy-subrc = 1
    (invoice already exists) then your own error message will be proceeded
    and the invoice won't be posted.
    Hope this helps
    Ray

  • Special GL - F-65 Check duplicate invoice

    Dear All,
    I have a requirement, we use F-65 and apply BTE Process "00001110" DOCUMENT POSTING: Check on invoice duplication
    to check against duplicate invoice for Reference + Currency + Vendor Code. That is OK.
    But now, user would like to check special GL posting too. But it seems cannot check it. Trace the program, it will not
    call Process 00001110.
    Can anyone help on this ?
    Thanks.

    Unfortunately, standard SAP only allows a fixed duplicate invoice check in F-43/FB60.  Unlike LIV, you cannot configure which fields get checked.
    Use BTE 00001110 (process module) and build a function that reads the MM LIV duplicate invoice configuration (table t169p).  The BTE will be called appropriately for F-43/FB60.  I developed and implemented this a while ago and it works great.
    I hope this is useful.

  • Tcode FV60 with ECC 6.02 does not check duplicate invoices

    Hi,
    We use FV60 top enter all invoices.  We have config (under MM) for duplicate invoice check against company code and "ref field" only.  When we enter an invoice with the same ref field value, it gives error message as expected.  However, when we change the date, the error message is gone and we are allowed to create the invoice and post the invoice.  This is not desireable and behaves very differently than tcode MIRO. 
    Is there any solution to have tcode FV60 perform the same checks, look to the same config for duplicate invoices in SPRO as MIRO and not allow for invoice creation if the "ref field" is identical?

    Hi all,
    Any solution on this..  Even we have the same kind of issue in our organization.  I am also trying various ways.  Plz help me if anyone has found the solution for this.  If I get something, i will update.
    Regards

  • Check duplicate invoice and amount

    Hi All,
    Can anyone help me with this issue.
    In T.code FB60 (invoice input field), I want the system to check the duplicate invoice and amount (If invoice number and amount are same) and it should not allow the user to proceed further.
    Please help..
    Regards,
    Vinay

    Thank you...
    But this is not an automatic posting.  Using FB60 manual posting.  Also in the vendor master if we check the double invoice field it will give a warning and proceed further and allows user to post entries.
    But my concern is "If the amount and invoice number matches the system shouldn't allow user to proceed further"  hope i am clear now.....
    Regards,
    Vinay

  • How to find duplicate invoice in Vendor..

    Hi Friends,
    I have Question in invoice duplicate are there how to see particular duplicate invoice what transaction code for this how to see.
    Thanks,
    srinu

    Your response is not clear.  Are you referring to Apple's lack of information?

  • Regarding user exit for FB60 Duplicate invoices

    hi experts,
    I want to fnd out how to check  Duplicate invoices in fb60 and disallows posting.
    Any kind soul can help?
    Thnaq.

    Transaction Code - FB60                     Enter Incoming Invoices
    Exit Name           Description
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    No of Exits:         14
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • Check for duplicate invoices and trigger a workflow

    Hello All,
        I have a requirement to check for duplicate invoices in AP(Accounts payable) and trigger a workflow when duplicate invoices are found. I a not sure how to do any of the above. Please  let me know if you have any information on:
    1) Checking for duplicate invoices in AP
    2) Trigger a workflow
    Are there any standard workflows that checks duplicate invoices?
    Thanks.
    --Mithun

    Hi MD,
    I doubt if system gives an error on FI side when a duplicate invoice is posted.
    I feel you would require a BAdi for it, where you can call your WF using FM SAP_WAPI_START_WORKFLOW.
    Hope it helps.
    Aditya
    P.S also ask your Func Consultants, if there are any settings in the Customization, where you could capture Inv Dt, Inv Amt, Vendor, Company code.
    Edited by: Aditya Varrier on Oct 15, 2008 9:38 AM

  • Duplicate invoice check in park invoice

    hello gurus
    what are the settings for duplicate invoice check at the time of invoice parking.
    Thanks
    Venkat

    HI Venkat,
    Let me  explain how the check for duplicate invoices work in FI:
    In FI,when checking for duplicated invoices,the system compares the following
    Note 305201 clarifies this in a more detail.
    The following fields must be identical for Duplicate invoice check
         Company code                             (BUKRS)
         Vendor number                             (LIFNR)
         Currency                                      (WAERS)
         Reference number                         (XBLNR)
         Amount in document currency        (WRBTR)
         Document date                             (BLDAT)
    If the document is having any one of the above filed different then the system does not consider it as a duplicate invoice.
    and also It will check duplicate invoice check in vendor master data and in posting key is there check box selected for sales related
    The setting you making in OMRDC i.e Materials management->Logistics Invoice Verification->Incoming Invoice ->Set Check for Duplicate Invoices is only valid for MM and not  FI invoices posted via FB60/FB65.
    You should check the F1 help on field "Chk double inv." (LFB1-REPRF) in the relevant vendor master record (transaction FK03).
    Please also check, that message F5 117 has been set correctly in the IMG using this path:
    Financial Accounting -> Financial Accounting Global Settings -> Document -> Default Values for Document Processing -> Change Message Control for Document Control For Document Processing
    Finally & mainly, go to the relevant posting key is defined as sales related in transaction OB41. You have to flag this field if the duplicate invoice check should work.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

Maybe you are looking for

  • Purchase orders for equipment rentals

    We often rent equipment for durations of between 1 - 12 months.  Usually we do not know ahead of time how long we will be requiring the equipment, so we would issue an "open purchase" order that is valid until we return the equipment.  We are invoice

  • Using URL Parameters with HTTP Comms Channel

    Hi, I need to build a new interface (HTTP - RFC) which will use several URL parameters. I've created a HTTP communications channel and Sender Service and this works. I'm able to define several URL Parameters by checking 'Adapter-Sepcific Message Attr

  • Do i need cable tv if i have apple tv?

    I am just wondering if I need cable tv if I have apple tv? can I just stream content over the internet?

  • I am trying to load a PMS Coated color swatch using InDesign CC and it indicates it does not exist...

    When I go to "New Color Swatch", then to "Pantone+ Solid Coated" Color Mode, Spot Color, and enter "582" it automatically adjusts to "5825". Indicating that there is no "PMS 582 C" – but there is a 582 C. What am I doing wrong?

  • I create files so big I can't play them?

    I just can't wrap my head around this idea. How come, when I render out a video file (and it doesn't have to be a long movie) in 1920 X 1080 - H264, I end up with a MULTI-Gigabyte file that is so large I can't play it on my Apple TV, can't even watch