How to Check Enhancement Pack of ECC system

Hi Experts,
I want to check enhancement pack of My SAP R/3 ECC 6.0 system.
Where can i find this information can you please help.
In System --> Status --> in component version i can see "SAP ECC 6.0".
On click of the button provided below this component version , i can see following details:
SAP_ABA             700                     0011     SAPKA70011     Cross-Application Component
SAP_BASIS     700                     0011     SAPKB70011     SAP Basis Component
ST-PI             2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
PI_BASIS             2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
SAP_BW             700                     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP             700                     0007     SAPKNA7007     SAP Application Platform
LCAPPS     2005_700                     0003     SAPKIBHD03     LC Applications (LCAPPS) 2005_700
SAP_APPL     600                     0006     SAPKH60006     Logistics and Accounting
from this information can you please help me identify my SAp R/3 ECC 6.0 system's enhancement pack version?
Regards,
Ashish Shah

SAP_APPL 600 No EHP
SAP_APPL 601 EHP1
SAP_APPL 602 EHP2
SAP_APPL 603 EHP3
SAP_APPL 604 EHP4
SAP_APPL 605 EHP5
SAP_APPL 616 EHP6
SAP_APPL 617 EHP7
Sorry if i am wrong....thats how i find it...i am an ABAPer.
Regards,
Vishnu

Similar Messages

  • How to check the BW and BIA systems are up and working fine.

    Hi friends,
    how to check the BW and BIA systems are up and working fine. And also what is ICM, how to check whether it is working properly or not.
    ANd what is name resolution and IP , how to check whether this is running fine.
    regards, balu.

    Hi,
    you can use process monitoring or the alert function in the standalone TREXAdmin tool.
    ICM:
    http://help.sap.com/saphelp_nw04/helpdata/EN/0a/a7903febb15a7be10000000a11405a/content.htm
    name resolution
    http://en.wikipedia.org/wiki/Domain_Name_System
    IP:
    http://en.wikipedia.org/wiki/IP
    Please also have a look at the transactions TREXADMIN and RSDDBIAMON2.
    I think it´s better if you use the forum search and google/wikipedia before you ask such questions.
    Best Regards,
    Jens

  • How to generate CCMS report from ECC system

    Hi,
    I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
    Regards,
    Pradeep J

    Pradip_jag12 wrote:
    > I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
    >Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
    Hi,
    Contradicting statements.
    However check the link for CCMS Configuration:
    http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    Ideally the CEN system should be a double stack i.e. best if its a solution manager.
    Regards,
    Srikishan

  • SRM - Shopping Cart - how to debug BADI BBP_CREATE_BE_RS_NEW in ECC system

    Hi,
    We are using BADI BBP_CREATE_BE_RS_NEW (ECC system).
    We put external breakpoint on this BADI.   Made sure also that the BADI is activated.
    Our problem is it didnu2019t stop on our breakpoint.  Authorizations to debug/etc are there.
    When it was not possible to debug when shopping cart is created in internet link (SRM), we used tcode BBPSC01 (ECC system) to see if we can go to the BADI and debug it.  However still the program did not stop at break point at the ECC side.
    (SRM Module shopping cart)
    How do we debug this BADI in ECC?  Anything to set up or ?????
    SRM_SERVER   550   0013    SAPKIBKT13   SRM_SERVER 550: Add-on installation
    SRM add on to ECC 6.0
    Looking forward to hearing from you as soon as possible.
    Thanks.

    Hello,
    User calling BAdI in ECC must be a dialog one in order to be able to debug with.
    Check whom user is called in R/3 by having a look at RFC transactional assigned to your R/3 backend in SRM SM59 transaction.
    Then, in R/3, modify this user as a dialog one (type 'B') then put an external break-point for this user.
    Regards.
    Laurent

  • How to see enhancment pack level.

    Dear All ,
    what is enhancment pack?To install new enhancment pack TX-SAINT will be used?How to see curent enhancement pack level?
    Regards
    Ashok

    Dear All,
    Its requirment in my company to to upgrade the enhancment pack.I work on patch but i m confused regarding enhancment pack.
    Is both are same?Right now my basis patch level is SAPKB70015 Basis Support package 15 for 7.00 .Same with cross aplication componenet SAPKA70015 ABA SUPPORT PACKAGE FOR 15 FOR 7.00.
    So i have to increse the patch level.
    which TC we use for enhancement pack?
    Regards
    Ashok

  • How to check support packs

    Hi experts,
    Please any one can tell how to see support packs in bw.

    Hi Viswanath,
    goto Systems-->Status
    Click the Component Information button in "SAP System Data frame".
    Here you can see which Support pack is there in your system in the "Highest Support Package" column.
    Regards,
    Sreedhar

  • How to find Service Pack for R3 System...

    Hi
    Its very easy to find Service Pack for BI system.
    But once i try to do for R3 System , i find lot of software components like:
    SAP_ABA
    SAP_BASIS
    PI_BASIS
    ST-PI
    SAP_BS_FND
    SAP_BW
    WEBCUIF
    SAP_AP
    SAP_HRCRU
    SAP_HRCPT
    SAP_HRCPH
    SAP_HRCNZ
    SAP_HRCNO
    SAP_HRCNL
    SAP_HRCMY
    SAP_HRCMX
    and many more... so i m confused which software component i should choose to find exact software component.
    Thanks...

    Hi,
    Log onto your system. From any screen, select System > Status. In the block labelled "SAP system data", hit the magnfying glass. Although there are many objects that can be updated, the most critical is "SAP Basis". Under the column "level" you can see the highest rev you have installed.
    Hope it helps.
    Thanks and Regards,
    MuraliManohar.

  • How to call data from backend ECC system in Gateway Hub System?

    Hi Experts,
    We have a scenario where the GR process has to be done on Mobile app. We have a SMP 3.0 and Netweaver gayeway deployed as Hub.
    I really need quick pointers on how should we go about  this?
    My queries are mentioned below:
    1.I don't see SAP data in Gateway system.So will we need to create RFCs in ECC and call them in Gateway system.
    2. Will we need to install IW_BEP in backend system? Can someone explain its real purpose?
    3. How do we do our data modelling? How do i define it if I don't have my SAP data structures in Gateway system.
    Your guidance will really be appreciated.
    Regards,
    Saket.

    Hi sanket,
    Answering to your second question,
    IW_BEP Component is used to handle the events and actions activated in the SAP system and to publish these events and actions through SAP NetWeaver Gateway.
    The BEP functionality enables you to:
    Obtain and publish Business Object Repository (BOR) events without writing code. For example events raised as a result of changes in a business object: because of changes in a sales inventory, an event is raised and published to SAP NetWeaver Gateway.
    Obtain and send events for SAP Business Workflow, for example, an event is raised for a workflow user decision step.
    Obtain and send events from your code, for example, events raised as a result of implemented customer code, such as BAdI implementations.
    Read more about IW_BEP at:
    Business Enablement Provisioning (IW_BEP)
    https://help.sap.com/saphelp_gateway20sp08/helpdata/en/a2/15f0b42f2948f6bb9e51f98e8c39e9/content.htm
    Development with IW_BEP in SAP Netweaver Gateway
    https://help.sap.com/saphelp_gateway20sp05/helpdata/en/64/472d8e21a342ba9d83e403ff4cd9db/content.htm
    Hub Odata Channel without IW_BEP
    http://help.sap.com/saphelp_gateway20sp06/helpdata/en/32/5895449ac74783a3bd80a782c82f85/content.htm
    Regards,
    KK

  • How to check service failover  in RAC system

    Hi experts,
    We have 4 nodes with oracle 10G2 at redhat. we create some service with failover function. some service is not. total 4 services is in system.
    I try to use below SQL to find services failover function.
    ==
    select INST_ID,STATUS, FAILOVER_TYPE, FAILOVER_METHOD, FAILED_OVER
    from gv$session group by INST_ID,STATUS, FAILOVER_TYPE, FAILOVER_METHOD, FAILED_OVER;
    ==
    The above SQL does not return each service failover function.
    ==SQL> select INST_ID,
    2 STATUS,
    3 FAILOVER_TYPE,
    4 FAILOVER_METHOD,
    5 FAILED_OVER
    6 from gv$session group by INST_ID,
    7 STATUS,
    8 FAILOVER_TYPE,
    9 FAILOVER_METHOD,
    10 FAILED_OVER;
    INST_ID STATUS FAILOVER_TYPE FAILOVER_METHOD FAILED_OVER
    1 INACTIVE NONE NONE NO
    4 ACTIVE NONE NONE NO
    2 INACTIVE NONE NONE NO
    1 ACTIVE NONE NONE NO
    4 INACTIVE SELECT BASIC NO
    3 ACTIVE NONE NONE NO
    2 ACTIVE NONE NONE NO
    4 INACTIVE NONE NONE NO
    3 INACTIVE NONE NONE NO
    9 rows selected
    How do we explain about result for failover?
    This is a prod system we do not like to make a testing .
    Thanks for your help!
    JIm
    Edited by: user589812 on Sep 14, 2009 9:01 AM

    Hello Buddy,
    One of your users are using FAILOVER cause values SELECT and BASIC on query output. Another users connected on that moment no able to use FAILOVER probably caused by misconfigured TNSNAMES.ora file. Check it on client or apps server machines.
    I hope this help u.
    Sample of Tnsnames.ora
    PRD =
    (DESCRIPTION =
    (LOAD_BALANCE = ON)
    (FAILOVER = ON)
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = RAC2-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = RAC3-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = RAC4-vip)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = your_service_name)
    (FAILOVER_MODE =
    (TYPE = SELECT)
    (METHOD = BASIC)
    (RETRIES = 10)
    (DELAY = 1)
    Cheers,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • How to "install" Enhancement Pack Installer

    We have located and downloaded the SAPEHPI for both Windows and UNIX.  After accomplishing this we were really weren't sure how to "install" or configure this tool.
    We see LOTS of documentation and discussion about running this tool, but not much regarding what to do with it after you download it?
    We were expecting to see something on SAP's instguides page, but there was nothing there.
    We aren't necessarily looking for a walk through in this forum - just some documentation that we could read to get us going.
    Any information or suggestions would be much appreciated.
    Thanks,
    Jeff Hene
    We Energies
    SAP System Administration

    Hi Jeff,
    You have to unpack the file with SAPCAR:
    SAPCAR -xvf <download direc.>\<path>\<file>.SAR
    The installation program creates a new direcgtory called EHPI.
    To start the SAPehpi program the command is:
    <DRIVE>:\<path>\EHPI\STARTUP.BAT "jce_policy_zip=<policy zip file>"    mind the double quotes if you work on windows
    To get the policy zip file you have to read notes 1238121 and 1240081. It depends on the release but we downloaded the policy file from the sun page.
    The documentation more useful for this tool I have found is "How to install SAP Enhancement PAckage 4 for SAP ERP 6.0" version 1.07 from 2009-08-26.
    Hope this help you.
    Regards,
    Ana

  • How to check received mails in SAP system

    Hi Experts,
    I have a requirement where I need to send an email from Outlook to SAP system using SMTP.
    All the SMTP configurations and settings have been done.
    I had a query that how do I check that the mail is recieved in the SAP system.
    Like we have Utilities - Overview of send orders to check the mails sent from the SAP system, do we have some place to check the receiving mails also?
    I came to know about a SOOD table, but no entry is been made in it when I test sending mail.
    Any help would be highly appreciated
    Regards,
    Saumya

    Hi Saumya,
    You can try this just to see if your CRM is receiving emails.
    Go to t-code SCOT and then Utilities->Trace Settings. Activate the trace for inbox.
    Then send an email to your CRM system.
    Wait a few seconds and then go to SCOT again, and then Utilities->Trace Selection.
    Check if an entry corresponding to your email was created.
    If not, maybe some configuration is missing. I've always worked in a Interaction Center scenario, with ERMS integration. For that, the configurations steps need were:
    - Activated the workflow
    - Configurate t-code SO28 to generate the ERMS object
    - Used ERMS rule modeler to route my emails to an organization ID
    - Activated service SAPCONNECT (with an user associated for authorization)
    Hope that this may help you to go a little trough.
    Kind regards.

  • How to use Enhancement Framework in ECC 5.0 and 6.0

    hi
    is there any good tutorials on enhancement framework? i have gone through the help but its not very clear. if anyone has stepby step guide will be useful.
    ~Suresh

    This is an old question... but i think it is very useful for the developers if anyone search it and find my answer relevant like it with immediate effect.....
    What is Enhancement Framework?????????
    Enhancement Framework is the new paradigm to bring all enhancement techniques under one roof. It can also be switched using Switch Framework. The following are different enhancement technologies available under this framework.
    • Source Code Enhancement
    • Function Group Enhancement
    • Class Enhancement
    • Kernel-BADI Enhancement
    Semantically related enhancement options are grouped under a ‘Simple Enhancement Spot’. ‘Composite Enhancement Spot’ contains one or more of Simple and other Composite Enhancement Spots. On the other hand (implementation side), various related implementation elements are grouped under a ‘Simple Enhancement Implementation’. A ‘Composite Enhancement Implementation’ can contain one or more of Simple and other Complex Enhancement Implementations.
    1.Source Code enhancement
    Whenever enhancement needs to be incorporated directly into the ABAP source code, this technology shall be provided. Implementing this technology is also called as Source Code Plug-In. There are two types of Source Code enhancements possible.
    • Implicit enhancement option
    • Explicit enhancement option
    >>>Implicit enhancement option
    Throughout the ABAP system, enhancement options are automatically available at certain pre-defined places. Some of the implicit options are:
    • At the end of all the programs (Includes, Reports, Function pool, Module pool, etc.), after the last statement
    • At the beginning and end of all FORM subroutines
    • At the end of all Function Modules
    • At the end of all visibility areas (public, protected and private) of local class
    ******Note that, in order to implement any of these Source code enhancements, you need to be in the ‘Change Enhancement mode’ (the spiral icon available in the editor). Technically the source code plug-in implementations are stored in a separate include program and not as part of the original source program.***********
    >>>>Explicit enhancement option
    The Implicit enhancement options are provided at specific source code places explicitly by SAP (Note that these enhancement definitions can also be created by partners and customers in their code).
    There are two types of Explicit Enhancement options available. One which can be provided at a specific place - called Enhancement Point, and another which can be used to replace a set of statements – called Enhancement Section. For this, we now have two new ABAP statements, viz.
    • ENHANCEMENT-POINT
    • ENHANCEMENT-SECTION
    When the Enhancement-Section is implemented, only the implementation gets executed and the original code doesn’t get executed. This is a new technique, which didn’t exist previously in any of the old ways of enhancing, to exclude any standard SAP code from execution. Because of this, there can be only one active implementation of an Enhancement-Section. On the other hand, there can be multiple active implementations of an Enhancement-Point, in which case all the implementations will be executed with no guarantee in the order of execution.
    we mainly use above framework .......if nybody need further and more information let me knw...

  • How to check Java installed in my system

    Hi All
    I new to java i have not some doubts
    1)In my system I have this many JDK i dont know for this JDK what IDE version i need to download. I like to use netbeans which one should i need to download?
    C:\Program Files\Java\jdk1.5.0_01
    C:\Program Files\Java\jdk1.6.0_22
    C:\Program Files\Java\jre1.5.0_01
    C:\Program Files\Java\jre6
    But i dont have any IDE to develop my java like eclipse or Netbean etc ,I have Only Jdeveloper 9.0.3.5
    2)How to find apache tomcat server is installed in by PC or not how to test that ?
    please know the installion steps also in need to install ..
    Advance Thanks
    Aarasu

    I like to use netbeans which one should i need to download?You'd think you would go to the Netbeans website and find out, but I'm silly like that. Either a recent JDK 6 or the latest JDK 7 will do just fine. I would install Java anywhere except in program files. I install all my Java stuff in a directory called "java" myself, so I have C:\java\jdk6, c:\java\eclipse37, c:\java\tomcat7, etc. I never have to search for my stuff that way.
    (of course being a proper computer savvy user I partioned my harddrive to reserve the C drive specifically for the OS only, so it is in fact e:\java).
    2)How to find apache tomcat server is installed in by PC or not how to test that ?Use the search function of your OS of course. Its not even a Java related question.

  • How to check 10.2.0.4 system requirement

    Following are the system requirements for the installation of patch 6810189 in AIX 5.3 64-bit:
    1. IY73570: IBM C++ Runtime Environment Components for AIX PTF
    My Issue:
    ======
    My AIX administrator installed the patch and got the message of successful installation. But when trying to review the status through command instfix -ik IY73570 then got the message
    "There was no data for IY73570 in the fix database."
    2. If you have "XL C" installed on the computer, then apply the following patch as well:
    *.     IY73568: XL C Enterprise Edition V7.0 for AIX PTF
    3. If you have "XL C/C++" installed on the computer, then apply the following patch as well:
    *.     IY73569: XL C/C++ Enterprise Edition V7.0 for AIX PTF
    My Issue:
    ======
    How I can come to know whether the "XL C" and "XL C/C++" are installed or not? Can anyone help me what fileset does this means or any other help?
    Thanks in advance.
    Regards,
    Umair

    Please remove this AIX question from this Oracle forum, and repost it in an AIX specific forum, or use IBM's support site.
    Please apologize for cluttering up this forum with non-Oracle questions.
    Sybrand Bakker
    Senior Oracle DBA

  • How to check that whose access my system

    i am use computer and i want to check how many request comes my computer and which files or folder shered at that time ????

    I like to use netbeans which one should i need to download?You'd think you would go to the Netbeans website and find out, but I'm silly like that. Either a recent JDK 6 or the latest JDK 7 will do just fine. I would install Java anywhere except in program files. I install all my Java stuff in a directory called "java" myself, so I have C:\java\jdk6, c:\java\eclipse37, c:\java\tomcat7, etc. I never have to search for my stuff that way.
    (of course being a proper computer savvy user I partioned my harddrive to reserve the C drive specifically for the OS only, so it is in fact e:\java).
    2)How to find apache tomcat server is installed in by PC or not how to test that ?Use the search function of your OS of course. Its not even a Java related question.

Maybe you are looking for