How to check Exchange smtp relay logs successed/failed
We have a quite a few servers in the company that allow to relay smtp through our current Exchange environment. Often time, the recipients did not get those messages that was send out from our SQLservers. We would like to get these logs from Exchange to see
why those messages were sent from SQLservers that did not go through. Is there a way to track those messages?
Hi ThaiFL,
Any updates?
Frank Wang
TechNet Community Support
Similar Messages
-
- How to Check Exchange Rate History -
Hi,
Is anybody knows the name of the "exchange rate history table", for I would like to check which user have modify the rate, in which I can't check it in change log. Thanks for your help and time.
Cheers,
sereneDear,
It is the sytem current behaviors that "show history function" doesn't work for Exchange Rates and index window.
But You could run the Financials > Exchange Rate Differences report to check the difference.
In the Selection Criteria, set Execution Date 01/08 and
select used Currency.The Exchange Rate Differences window will show the difference for each BPs and Accounts, to double click the one line, Line Details will show the all transactions for each account.
There are some differences if the transaction use old exchange rate (such as 0.1234) since we have the current exchange rate (such as 0.1238)
If the transaction use the new exchange rate 0.1238, then the difference will show as 0.
Wish the information could solve your issue.
Regards
Apple -
How to Check Exchange Database Size with PowerShell in Exchange Server 2013
I been trying scripts in powershell to Check Exchange Database Size
Get-MailboxDatabase -Status | select ServerName,Name,DatabaseSize
but it doesn't work for me any suggestion or help?
Also what is the default size limit in exchange server 2013 (both edition) ?I been trying scripts in powershell to Check Exchange Database Size
Get-MailboxDatabase -Status | select ServerName,Name,DatabaseSize
but it doesn't work for me any suggestion or help?
Also what is the default size limit in exchange server 2013 (both edition) ?
That command seems to work for me. Do you get an error when you run it? What happens? To answer your second question, the limit of the databases, the maximum supported size is about 16TB. Best practices are to keep the database to under
a 2TB or even smaller depending on your backup and recovery objectives.
https://technet.microsoft.com/en-us/library/ee832792%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396#Best
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
How to check Exchange rates are daily updating in BW
Hi All,
How can we check whether currency exchange rates are updating from R/3 to BW.
If not how can we update daily from r/3 to bw in Background Job?
How can we do manully in BW?
Thanks in Advance,
C.V.Hi,
First of all check what time and how frequently the R3 system gets updated with the new/changed exchange rates. Depending on that you'll need to fix up the timings after the R3 system has been updated.
If you use PCs or any scheduling tool you can easily schedule them in the background using the background jobs.
Cheers,
Kedar -
SAPROUTER - how to check if SAP is logging in ?
Hi,
after i have created a message and opened connection for SAP in Marketplace, while waiting for their reply on the solution, is there any log i can check to verify that they have connected or are connecting to my system via saprouter ?
i know a way to check is to check the logon status of the ID we provided to them, other than this what else can we check ?
comment and advice will be highly appreciated.
thanks.
regards,
kentkaran & ashutosh's answers are the approach of checking the logon status in application or at OS level which i already know, anyway thanks for your suggestion.
vamshi, well, logbook is a good place to check the status of the logon which i didn't make use of last time. i just did and found that it isn't that accurate also. because today SAP had problem logging in to my system via telnet 5250 connection, just now i checked the log, the status it shows "Log on" but actually they didn't manage to logon. later when i restart my saprouter and asked them to retry to logon, they manage to logon, and the logbook status also shows "Log on". one thing good about this logbook is it does show me the name of the SAP support who logged on.
sergo, yup this is the way, it shows the time when it connects and when it disconnects, it shows the IP from SAP and the IP of my server that they are accessing. i had activated the log from below link, now only know how to make use of it.
http://help.sap.com/saphelp_47x200/helpdata/en/4f/992ed3446d11d189700000e8322d00/frameset.htm
well, with the log from both the Logbook (marketplace) and saprouter i can tell WHEN and WHO logins to my system via saprouter.
thanks all.
regards,
Kent -
How to check BO Log an Bo configuration
Post Author: Srividya
CA Forum: Deployment
How to check whether the BO log is enabled? As we are very new to BO, can you please tell us the steps to check the same.
Can you tell us the steps to get BO Configuration details from server.Cmnghellmann,
I don't even know if it's in the database, there's certainly no
supported way to access it if it exists
Shaun Pond -
How To check in Ironport log which is server is giving bad response to SMTP connection?
How To check in Ironport log which is server is giving bad response to SMTP connection?
You probably want to create a new log subscription for "SMTP Logs"
Go to System Administration/Log Subcriptions.
Click Add Log Subscription
Pick SMTP Conversation Logs.
Pick a log name (will be the folder name that gets created for the log files)
The defaults for the rest should be fine... maybe tweak rollover...
Make sure to remove it after you're done, its going to eat space and probably a little proc... its VERY verbose, but it should show you what you need. -
How to use multiple mail sending address in SMTP relay for exchange online
We have one SMTP relay configured with [email protected] credentials. one oracle application automatically shoots mail to users using this [email protected] to users. So if recipient reply on auto-generated mail it goes to mailbox of [email protected] (so that application
team see and reply to any query raised by recipient).
Now my requirement is, I want to notify users about their password expiry before 10 days (something like that) I have made the script and tested it in lab. But the main requirement is I want to use [email protected] mail ID for sending mail. And if any recipient
reply on the auto-generated mail it goes to [email protected] mailbox (which is managed by different team).
So the query How can I use two different mailbox enabled IDs for sending mails on a single SMTP Relay server
Thanks
Pankaj SharmaThanks Ed and Mavis for the reply and suggestion, but here scenario is different.
We have one SMTP relay configured with [email protected] credentials. one oracle application automatically shoots mail to users using this [email protected] to users. So if recipient reply on auto-generated mail it goes to mailbox of [email protected] (so that
application team see and reply to any query raised by recipient).
Now my requirement is, I want to notify users about their password expiry before 10 days (something like that) I have made the script and tested it in lab. But the main requirement is I want to use [email protected] mail ID for sending mail. And if any recipient
reply on the auto-generated mail it goes to [email protected] mailbox (which is managed by different team).
So the query is can I use two different mailbox enabled IDs on a single SMTP Relay, If yes then how..
Thanks
Pankaj -
How to check the success/failure of e-mail sending from Sharepoint?
Dear Expert,
I connect Exchange 2010 and SharePoint 2010. When user create workflow in sharepoint, it will send the email to confirm. if it's done. but I checked from user they didn't get the email. I would like to know how to check the success/failure of e-mail
sending from Sharepoint?
Thank youBy default, there is no logging mechanism in SharePoint for outgoing mails.
Mails in SharePoint are sent by giving an SMTP sever IP address in Central Administration. SharePoint never sends email directly. It relays or routes mails to the SMTP server. So, logging should be done in the SMTP server itself.
There is also another way of doing it. You can enable SMTP service of IIS for sending emails from SharePoint, which would also just relay the mails to an SMTP Server. But in this case, you can enable logging in your IIS SMTP Service. Please visit this blog
for more details.
In your case you need to check your exchange server for any failure for relaying mails.
Regards, Vikas Patel -
How to log successful logins to a syslog server in NX-OS
Does anyone know how to do this in NX-OS? I do it in IOS with the following commands:
login on-failure log
login on-success log
logging x.x.x.x
With that I get a syslog message that I can then log to a file to track who has logged into which device and when. But I can't find the syntax to do the same thing in the Nexus switches that we have. Does anyone know what the equivalent commands are?
Thanks,
BenHi Ben,
By default, failed logins are logged.
You can checked the log using:
show logging logfile | last 15
and for every logging failed (by default) you will get something like this:
2012 Dec 18 14:51:08 Nexus5010-B %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication
failed for user en from 2.2.2.1 - login
To get the success-login to show up in the logs we need to increase the level of the authpriv to 5 (it is 3 by default), and doing this will add a new log for failed or succesful connections.
Use the following command:
Nexus5010-A(config)# logging level authpriv 5
You can check loggin levels by using:
#show logging level
After you do this with the logging level you will see in the log something like this when a succesful login takes place:
2005 Jan 6 03:29:48 Nexus5010-A %AUTHPRIV-5-SYSTEM_MSG: admin :TTY=unknown
; PWD=/var/sysmgr/vsh ; USER=root ; COMMAND=/usr/bin/strings/proc/18340/environ
- sudo
Now for a failed login and after increasing the authpriv level you will see the following logs:
2005 Jan 6 03:31:36 Nexus5010-A %AUTHPRIV-4-SYSTEM_MSG: pam_unix(aaa:auth):check pass; user unknown - aaad
2005 Jan 6 03:31:36 Nexus5010-A %AUTHPRIV-5-SYSTEM_MSG: pam_unix(aaa:auth):
aut
hentication failure; logname= uid=0 euid=0 tty= ruser= rhost= - aaad
For logging *****
Nexus7018(config)# logging ?
console Set console logging
event Interface events
ip IP configuration
level Facility parameter for syslog messages
logfile Set File logging
message Interface events
module Set module(linecard) logging
monitor Set terminal line(monitor) logging level
origin-id Enable origin information for Remote Syslog Server
server Enable forwarding to Remote Syslog Server
source-interface Enable Source-Interface for Remote Syslog Server
timestamp Set logging timestamp granularity
You can use logging source-interface ....
Thanks-
Afroz
***Ratings Encourages Contributors **** -
Hi,
How do I set up an account to receive email from my SMTP Relay Server?
I've setup the SMTP feature and set my Server to use anonymous authentication.
Things appear to look ok.
But I can't connect make a test connection to it when I am trying to add an email account in Outlook.
I could be doing something wrong here.
This is my process.
1. I have setup my SMTP Server.
2. Created a user account in AD and given it an email address.
3. Opened Outlook and tried to manually add a POP3 account by specifying the incoming and outgoing Server details.
But when I go to test the connection on the email setup it keeps failing.
Please help.
ThanksHi Midi25,
As Florent suggested, please use Telnet to test SMTP Communication. For more details, please refer to following articles.
How to Use Telnet to Test SMTP Communication
XFOR: Telnet to Port 25 to Test SMTP Communication
In addition, please also refer to following article and check if can help you.
How to Configure a Windows Server 2003 Server as a Relay Server or Smart Host
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
On-premise Exchange 2010 SMTP Relay to O365 mailboxes does not resolve Display Name
Dear All,
We have SMTP relay receive connector in our on-premise Exchange 2010 server that accepts emails from anonymous users.
The Externally Secured check box is checked. Display Name of the sender in Emails to mailboxes in on-premise is resolved correctly.
But the display name of the sender in the same email to mailboxes which are migrated to O365 is not getting resolved.
Please let me know if anyone has seen this issue. Some of our mailboxes are in O365 and some are in On-premise server.
Thanks
FredDo you have a hybrid configuration set up, and if not, is there any particular reason?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
SMTP Host logs - How many users are authenticating - How many emails with distinct titles
hello,
can anyone help me out with gathering the following SMTP host logs to see:
How many users are authenticating.
How many emails with distinct titles
Can this be done in powershell or do i need to be looking somewhere else.
This is for O365Hi ,
Since the emails are hosted with office 365 i would suggest you to raise a ticket with Microsoft and request assistance from them which will make this task much easier
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
How to check ..the user who is currently logged in ..
... suppose i m logged in as HR schema ...so while using SLLplus * environment ...how to check ...that which use is currently logged in..
If you want to use the name in some program then you can use
select user into :variable from dual;
Regards
Kaustubh -
How to Check BPM success or fail in SXMB_MONI_BPE ?
Hi Experts
Help me...and i am new to BPM
I have done a simple BPM scenario and i am not sure it is working fine or not
So I open TS code : SXMB_MONI_BPE and here how to check the BPM
Working find or not ? if success means what is the response number?
Failure means what is the response number ?
Can any one explain me in detail....step by step of Monitoring of BPM?
Adv thanks and Points
Prasad KHi Prasad,
Two ways you can check your BPM has successfull or not.
1. Go to SXI_CACHE , Double click on Integration Process Check the Return Code has 0. If return code Non-zero, select the Integration Process and activate now it will come to the Return Code is '2' again activate and you will get Return Code as '0'.
2. Go to SXMB_MONI or SXI_MONITOR or SXMB_ADMIN
Execute the XML message, find out your message and that message has 'PE' that means that is a BPM message.
Click on PE you will see how BPM steps worked in your scenario where it failed exactly.
select the particular step and In Application toolbar there is ICON called 'Technical overview' click the buttion it shows the everything.
Regards,
Venu.
Maybe you are looking for
-
OSX 10.6.8 hangs: troubleshooting tips?
Hello All Using a MacPro1,1 Dual-Core Intel Xeon, 7 Gb ram and plenty hard disk space. My Mac recently started to hang. I have the beach ball appearing randomly and computer freezes for a number of seconds. It is not like a rogue process is hogging a
-
Where does iPhone store backups in Mac and Windows?
Sorry I could not find the answer elsewhere. Where does iPhone store backups on Windows and Mac? Can the location be changed? Thanks!
-
Derar experts, In any orgn, it is common to give some amount (cash) on account without knowing the purpose. And at a latter day the same person (employee) will come to finance and settles his transaction. (Either he may return the balance of amount t
-
SNMP OID for AssociatedAPs in Virtual WLC 7.4.100.0
Hello Guys! I need you help for something that I need to do to monitor my Wi-FI network. I'm using a Virtual WLC (SW Ver 7.4.100.0) where most that 30 APs are associated with, but I would like to monitor each disaciossiation of APs using SNMP. After
-
New Ipod Nano For My Niece...
I'm trying to help my 12 year old niece with her nano, and I can't seem to figure her problem out. She was by her cousin and plugged her nano into her computer. Somehow a ton of her cousins songs got onto my nieces that she does not want. I want to d