How to check firmware level on 5140i and GPS cover...

Hello!
How do I check firmware level on my 5140i and my GPS cover?
Upgrade is not something I can do myself I guess (service shop only) or?
Is it usual to have 2-3 minutes to get a fix point with the GPS?
Is it normal to have just 4 hours of GPS before batery needs to be loaded again? Hten GPs has a limited usuage.
/Patrik

Thanks Glyn -- I opened up the airport utility summary page and it says version 7.3.1 and update is grayed out so looks like I am good to go.
Another question -- when I open the finder to get to the airport utility, the preview shows airport utility application version 5.3.1 but the summary page says 7.3.1.
Why the difference?
Thanks again

Similar Messages

How to check ink levels of a 4620 using windows 8.1

How to check ink levels of a 4620 using windows 8.1

Hi krmoss,
Welcome to the HP Support forums. I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.
The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”. If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to check ink level of HP 3500 series deskjet printer's cartridge?

How to check ink level of my new HP deskjet 3510 e-All-in-one printer's ink cartridge?

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to check patch level in SAP 6.0 ?

how to check patch level in SAP 6.0 ?
is there any T code available for this
thnx in advance

Hello,
In note [1076022|http://service.sap.com/sap/support/notes/1076022] we can see:
b) Minimum support package levels and SAP kernel patch levels
   For non-SAP BW systems the minimum 700 SAP_BASIS support package level is SP14.
   For SAP BW systems, the minimum 700 SAP_BASIS support package level is SP16 and the minimum 700 SAP_BW support package level is SP18.
   Please consult note 1152240 for the minimum DbSl kernel patch level and the minimum JDBC driver requirements.
Regards,
Eduardo

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

How to Check source systems in RSA1 and verify that connections are working

How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod

How can check rollup level and autoconfigure or not on 11i

Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks first

portcommand wrote:
Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks firstUsing AutoConfig to Manage System Configurations with Oracle Applications 11i [ID 165195.1]
Autoconfig FAQ [ID 218089.1] -- 7. Is AutoConfig compatible with Oracle Applications 11.5.x?
How to check, which EBS Techstack Patchsets have been applied on 11i or Release 12.1.x ? [ID 390864.1]
How to Get The Patchset Level of Oracle Applications Products in R12 [ID 550654.1]
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
Thanks,
Hussein

No Low Ink Notification / How to check ink levels

I don't know how it disappeared, but I no longer have an HP icon, and never get low ink notifications. I have nothing "HP" in program files, so can't figure out how to check the ink levels. Every time I lose color I have to change both cartridges. Printer prints fine. Any suggestions? Hopefully I don't have to disconnect everything and start installation over - there's always a chance it won't work when I'm done. Technologically inclined Im not. Thanks for any assistance you can give. Printer is PSC1510 All-In-One.
Message Edited by paz88 on 03-21-2009 10:10 AM

If you press the Cancel and the Start Copy Color button on this printer at the same time and release them, it'll print a Self Test Report that'll have an ink level gauge on it. you can check it there.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

How to check ink levels on hp d110 in Windows 7

How do I check the ink level of my D110 printer in the Windows 7 program?

Hi there,
I understand you are wanting to check the ink levels on your Photosmart D110 printer, but no longer have the Solution Center program to do so. I can definitely help you with that. Please click here and this document will show you how to check the ink levels on the front of the printer and in the Solution Center.
Hopefully this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How To Check Firmware Versi

I have a Zen Touch 20GB and it is acting very strange. It is a great MP3 player however when I go to select track ahead, it switches play modes from normal to random which is so frustrating! I was wondering if there is a way to see what version of the Firmware I have installed on the player? I remember I did flash the device when it was st purchased 2 years ago to support MTP transfers.
Can someone please explain if there is a simple way to check my installed firmware version on the device?
Thanks!

Wow - come on guys - I know this is not a top of the line MP3 player but I would think someone here knows how to check the firmware on the device?

How to check my level of standard of Java project

Hi,
I have finished a simple project in Java(Mostly swing),
MS-Access,JFreeReport.Then manual testing is also finished.
Now I want to test the coding,GUI desing and all that is simply I want to test the standard of the project.My plan for this is to use some test automation tools.
So Will you plkease which software I have to test my Java Project?
Thank you so much .
Meena.

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to check if an object exists and how to discard it?

Greetings,
I have a main GUI panel in a JFrame that creates a smaller JFrame with a progress bar and text area whenever a process is initiated. I've set the default close operation to DISPOSE_ON_CLOSE as when I set it to EXIT_ON_CLOSE the main GUI panel closes as well (!). But whenever I'm closing the smaller JFrame and initiate a new thread, then the same operation is perform in parallel 2, 3 ,4 times, etc. It seems that the object of the class ProgressGUI which carries all the components of the small panel is not disposed properly. So my question is how can I check if an object exists and if yes how can I discard it? Or in other words how can I discard the JFrame of the small panel without closing the main GUI panel as well?
thanks,
Thomas

I've set the default close operation to DISPOSE_ON_CLOSE thats right.
So my question is how can I check if an object exists Whenever you create an object, save its refrence somewhere, then just check
if(reference==null){
         //object does not exist
}else {
        //object exists
and if yes how can I discard it? Ensure that no references of the object to be discarded are remaining with any of the objects and then believe in 'Garbage Collector' to do the job! e.g. if there is only one reference to the frame (in your case) somewhere, you can just make an assignment like:
reference=null;by doing this, you have made the object a candidate for garbage collection. Rest is done by 'Garbage Collector', not you.
For cases like yours, it is better to make the small frame just once and whenever required just make the frame visible.
e.g.
JFrame smallFrame;
void showSmallFrame(){
    if(smallFrame==null)smallFrame=new SmallFrame(); //or something like that
    smallFrame.setVisible(true);
}Thanks!

How to check patch level applied or not?

how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
- FA.M mini-pack or later
or
- FIN_PF.E or later
and
-ATG H RUP4() or higher
thanks

Hi;
how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
- FA.M mini-pack or later
or
- FIN_PF.E or later
and
-ATG H RUP4() or higherPlease check :
- How to check which Techstack patchsets have been applied [390864.1 ]
Regard
Helios

N900, How to check firmware, and send operator com...

Good day to you all,
i recently got my N900 from a Nokia Store (Monday 23rd), i am living in UAE, Dubai
i would appreciate if someone could answer these 2 questions:
1- how do i check which firmware do i have (usualy in Symbian *#0000#)
2- when i dial *121* which is a service command to check my balance it gives me a wrong phone number, so is there any way to send these commands (maybe in terminal?)
thank you all
Az. At.
IT Support Engineer
DED

Wrong forum - goto the N900 Maemo Forum:
/discussions/board?board.id=maemo
We'll just be here talking about the shortcomings of Symbian S60v5.. lol
I love my purple screen, 1/2 day battery, sketchy touch screen and $800 price tag - I call it my Lumia 900

How to check battery level?

Is there a way to check the battery level on the iPod Touch? I recently acquired a new 32 GB Touch, and the first thing I did was upgrade to the 2.0 software. I have been unable to find an option or menu that will tell me how much battery life I have remaining.
In looking around I was able to find that on the iPhone there's a Settings > General > Usage menu, but I don't have that on my Touch.
All I ever get is the 20% remaining warning message. Is there no other way to determine how the battery is doing?
Thanks for the help...
-Gary

Hard to believe they don't have something that tells you where you're at. The icon is okay, but is not as helpful as an approximate percentage or number of minutes remaining. I realize battery life remaining can change drastically, say if you start watching a movie, but it would be nice to have something a little more substantial.
I submitted feedback...thanks for the link.
-Gary

How to check firmware level on 5140i and GPS cover...

Similar Messages

Maybe you are looking for