How to check for 12-bit versus 16-bit audio?

Several hours of my first digital recordings were done with 12-bit audio (factory default). Later I changed the camera's settings to 16-bit, but I'm not sure when I did that.
Is there a way to check the audio bit-rate of a clip if the camera doesn't display that information? I'd like to periodically check the imported clips to determine when I started recording with 16-bit audio, because at that point I'll need to change the Easy Setup settings in FCE.
Thanks.

Unfortunately not. FCE assumes you set the easy setup correctly and will capture the audio as if it's that sampling rate. It's unfortunate that some cameras don't display this. If you capture fairly short segments, around 10 minutes, you should be able to get away with it however, especially if you don't capture across a TC break.

Similar Messages

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

Want to know how to check for new line character in text file

Hi All,
I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
Thanks
static int readandwriteFile(Logger logger,String filepath){
          BufferedWriter out = null;
          BufferedReader in = null;
          File fr = null;
          int get_count = 0;
          try     {
          if(new File(filepath).exists())
          fr= new File(filepath);
                    System.out.println("FileName: "+fr);
               if(fr != null){
in = new BufferedReader(new FileReader(fr));
                         String text = in.readLine();
                         if(text != null){
                         get_count = Integer.parseInt(text);
                         in.close();
                         else{
                              get_count = 0;
     else{
out = new BufferedWriter(new FileWriter(filepath));
     out.write("0");
            out.close();
               }          //Reading of the row count file ended.
          catch(Exception e) {
               e.printStackTrace();
          finally {
               try{               if (in != null) {
                         in.close();
          if (out != null) {
                         out.close();
          catch(Exception e) {
                    e.printStackTrace();
          return get_count;
     }

You are calling the readline() only once which means you are reading only the first line from the file...
Use a loop (Do-While preferably)
do{
//your code
}while(text == "")

How to check for the sub folder in the document library Is already Exist using CSOM?

Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
            context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
            camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
                                        <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                                            </Eq>
</Where>
</Query>
                            </View>",
@"/sites/test/hcl/"
+ InputFolderName);
            Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
            context.Load(listItems);
            context.ExecuteQuery();
if (listItems.Count > 0)
                retStatus =
true.ToString();
else
                retStatus =
false.ToString();
catch (Exception ex)
            retStatus =
"X02";
return retStatus;
thanks
Sundhar

Hi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support

How to check for locks on a table inside a program?

Hi Gurus,
Kindly let me know how to check for a lock on a particular table inside a program.I know that we can see locks on table held by a user from transaction SM12 but my requirement is to check for lock on MARA/MARC/MARV if lock exist then bypass my code else do the code.
Kindly suggest or give code to check for a lock on a particular table.
Thanks in advance
Sudipto

FAQ. Locked.

How to check for updates on SCM packages?

Hey guys,
I wondered for some time now how to check for updates on SCM packages, i.e. -git
or -svn ones. Updates for binary packages are automatically updated by pacman,
no problem there. Checking for updates on non-SCM packages from the AUR is
easily done with one of the various helper tools available (personally, I use
slurpy).
However, SCM packages can change without their PKGBUILD changing, so I'm not
notified that I should recompile and update them.
Is there a "proper" way of doing this? Am I missing something?
Thanks in advance!

If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition.

How to check for impacts due to upgrade

We are plannining to upgrade from 4.7 to ECC6..How to check for impacts on FTP'S,shell scripts and RFC's etc due to the assesment..Please suggest

Hi,
FTP's and Shell scripts are OS dependant not SAP or Database dependant so there will be no change at all unless you upgrade OS too. RFC's are not afected as per guides, notes and my experience.
I´m doing an upgrade from 4.6C to 6.0 with connections with at least 10 systems and none of them had an issue during tests
Good luck

How to check for bootblk on Disk

Does someone know how to check for bootblk on solaris disk.

If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition.

Could someone please explain how to check for flashback, to a beginner?

Could someone please explain how to check for flashback, to a beginner? Thanks.

Install all of the available software updates. If you have flashback it will be automatically removed.

How to check if the WL is 32 bit or 64 bit?

I have installed WL 9.2 MP3 but I am not sure if it is 32 bit or 64 bit version. Is there a way to confirm the same? I am using it on Solaris 10. Also, how can I confirm if the JRE that came with it is 32 bit or 64 bit? Is there any command that I can run to check the JRE version too?
Thanks,
Gaurav.

It should be in your weblogic logs at startup time.
i.e.
####<Apr 10, 2009 3:12:13 PM EDT> <Info> <WebLogicServer> <> <> <Main Thread> <> <> <> <1239390733489> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
####<Apr 10, 2009 3:12:16 PM EDT> <Info> <Management> <> <> <Main Thread> <> <> <> <1239390736942> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
There is common weblogic binary for 64bit or 32 bit. It is a JVM where you can select 32bit or 64 bit version.
Hope this will help.
thanks,
jayesh@yagna

How to check for keyloger on Imac(intel)

I need help, I think I have a keyloger on my computer because my roommates can see everything I do. I also have a shared folder in my finder with their name on it that strangely comes and goes but I am the only one with a computer in the house but they all have a smartphones. I would like to stop this immediately. How can stop sharing folders, check for a keyloger and get it off immediately? Pleasee help

Hello, keyloggers can be tough to find, here's a bit of info on them...
http://forums.macosxhints.com/archive/index.php/t-41204.html
http://www.keylogger-mac.com/mac-keylogger-perfect-keylogger-for-mac-os-x.html
http://uglypufferfish.com/2008/10/31/mac-keyloggers/
In System Preferences>Sharing, what all is enabled?
In System Preferences>Security>Firewall, what are your settings?
Could anybody have your Password? Do you leave it running when you're not around?

How to check for archivelog backup on a particular date or time?

Dear All,
We have RMAN full database, cumulative and archivelog backup(eg location: Diskgroup A) scheduled on a regular period basis. Assume archivelog location is Diskgroup B. The diskgroup B became full and unable to archive further, since no space. Unable to connect to database, connect internal only until freed error. alert log also shows that archiver error. So the solution for this to clear some space in diskgroup B by removing some old archive logs. In our environment, everyday the archive logs are stored in a separated folder arranged in date wise. I can do that . But before clearing some space, i need to make sure that the folder( or any date folder what im going to delete) is backed up or not. How to check that? Any idea please?
eg: i have archivelogs like this in folders
01_11_2013/
02_11_2013/
03_11_2013/
04_11_2013/
05_11_2013/
06_11_2013/
If i want to remove the folder 01_11_2013/( and its contents ie archivelogs) , how to check whether the archivelogs in this folder 01_11_2013/ is backed up or not?
Regards,

Pradeepcmst wrote:
Dear All,
We have RMAN full database, cumulative and archivelog backup(eg location: Diskgroup A) scheduled on a regular period basis. Assume archivelog location is Diskgroup B. The diskgroup B became full and unable to archive further, since no space. Unable to connect to database, connect internal only until freed error. alert log also shows that archiver error. So the solution for this to clear some space in diskgroup B by removing some old archive logs. In our environment, everyday the archive logs are stored in a separated folder arranged in date wise. I can do that . But before clearing some space, i need to make sure that the folder( or any date folder what im going to delete) is backed up or not. How to check that? Any idea please?
eg: i have archivelogs like this in folders
01_11_2013/
02_11_2013/
03_11_2013/
04_11_2013/
05_11_2013/
06_11_2013/
If i want to remove the folder 01_11_2013/( and its contents ie archivelogs) , how to check whether the archivelogs in this folder 01_11_2013/ is backed up or not?
Regards,
rman> list backup;
Which begs the question .. why is the FRA getting filled in the first place? Is it seriously undersized? Are you not doing regular housekeeping with rman 'delete obsolete' and 'backup archivelog delete input'

How to check for missing fields in the file?

Hi friends,
I have a file to file scenario in which if any of the fields have a blank value, i have to put the file back in the source folder. If none of the fields are missing, the scenario should work normally.
Can anybody tell me <b>how can i check for the field lengths</b> and if any of the fields are blank, <b>how do i send it back to the original folder.</b>
Waiting for your responses,
Divija.

Hi Divija,
>><i>how can i check for the field lengths</i>
Since you need to basically check if the field has a value or not, i dnt think you need to check for the length of the field. Instead, you can use any one of the booloean functions available in the graphical mapping editor to check if the field has a value or not(filed value true or false)
>><i>how do i send it back to the original folder.</i>
You can maintain a flag variable in the target structure such that if any of the source fields donot have values, the flag's value becomes 1 else it remains 0.
Now, you can check if the value of flag is equal to 1/0 in the bpm and accordingly send the data.
If in case, you donot want the flag to come in the target file that is loaded/sent from the bpm in the end, i think even tat can be taklen care of.
You can create two receiver communication channels and define one file adapter in each such that one has the destination as the actual target directory and the other has the original source directory as the destination.
Regards,
Sushumna

How to check for the variable passed to a function inside a component

I'm trying to pass a variable to a function inside of a
component in a conditional statement.
How to check the existance of this variable inside the
function so that I can use the right <CFarguments>:
in aForm.cfm I have:
<cfinvoke component="#application.cfcroot#.business.Order"
method="selOrderItems"
returnvariable="q_OrderItems"
OrderItemAbbreviation="Min"></cfinvoke>
<cfset MCompIDs = ValueList(q_OrderItems.OrderItemID)>
<cfif listFind(MCompIDs,attributes.CompID)>
<cfset isM = true>
<cfelse>
<cfset isM = false>
</cfif>
<cfinvoke component="#application.cfcroot#.business.Order"
method="selOrderItems"
returnvariable="q_OrderItems"
OrderItemAbbreviation="SMEnroll"></cfinvoke>
<cfset SM_CompIDs =
ValueList(q_OrderItems.OrderItemID)>
<cfif listFind(SM_CompIDs,attributes.CompID)>
<cfset isSM = true>
<cfelse>
<cfset isSM = false>
</cfif>
<CFIF isSM>
<cfset temppath = frmcreator.buildFrm(isSMFlag=isSM)>
<CFELSE>
<cfset temppath = frmcreator.buildFrm(isMFlag=isM)>
</CFIF>
On aFormComp.cfc where the function is,
I checked the existance of isSMFlag this way and I got error
saying that :
Context validation error for tag CFARGUMENT.; The tag must be
nested inside a CFFUNCTION tag.
How can I properly check the existance of isSMFlag inside the
function so I can use the right cfarguments?
<CFFUNCTION NAME="buildFrm" access="public"
returntype="String" output="No">
<cfif StructKeyExists(arguments, "isSMFlag")>
<CFARGUMENT NAME="isSMFlag" REQUIRED="YES"
TYPE="NUMERIC">
<cfelse>
<CFARGUMENT NAME="isMFlag" REQUIRED="YES"
TYPE="NUMERIC">
</cfif>
........ etc
</CFFUNCTION>

<CFFUNCTION NAME="buildFrm" access="public"
returntype="String"
output="No">
<cfif StructKeyExists(arguments, "isSMFlag")>
<CFARGUMENT NAME="isSMFlag" REQUIRED="YES"
TYPE="NUMERIC">
<cfelse>
<CFARGUMENT NAME="isMFlag" REQUIRED="YES"
TYPE="NUMERIC">
</cfif>
........ etc
</CFFUNCTION>
NOT this way, that is for sure.
The <cfargument ...> tag is for defining the arguments
a function
accepts either optional or not, but they are not required.
Give this a
try to see the differences.
test.cfc
<cfcomponent>
<cffunction name="a">
<cfdump var="#arguments#">
</cffunction>
<cffunction name="b">
<cfargument name="foo">
<cfargument name="bar">
<cfdump var="#arguments#>
</cffunction>
</cfcomponent>
test.cfm
<cfset something = createObject("component","test")>
<cfoutput>
#something.a("blue","green")#
#something.b("blue","green")#
</cfoutput>
Not tested or debugged so watch out for typos.

HOw to check for the Child Elements USing only SAX Parsr?

HI Guyz,
How to check whether there are any Child Elements in an XML file using ONLY SAX parser ??? I have a requirement of checking first whether there is any Child Elements exists for a Element or not and based on that I have to take certain actions. Can anyone suggest me How to do that ???
Thanx
KK

Since SAX is event controlled, you wont know if there's a child element unless you actually bump into it with the Parser. You'll simply get another startElement event after your current one.
/Tom

How to check for a button

I have a form that submits to itself. My submit is the
standard :
<input type="submit" name="btnsubmit" value="Submit Your
Order">
When the form is submitted, I check for the existence of
btnsubmit using paramerexists or isDefined :
<cfif parameterexsits(btnsubmit)>
perform inserts, etc.
</cfif>
This works fine. But my question is what do I do if the
type=button instead of submit ? For example
<input type="button" name="btnSubmit" value="Submit Your
Order">
I have some javascrpt validation that will submit the form
when the button is clicked. Howver, how do I determine whether the
button was seleceted or not, so that I can do my processing
(insert, etc. ) ? I tried to use the isDefined or parameterexists
like before but that does not work ?
What is the command to check that a button was selected
?

Assuming your <input> button is inside of the form you
are submitting,
simply use
<cfif isDefined('form.btnSubmit')>
However - some browsers only pass the button value if that
particular
button is clicked.
In other words, hitting 'enter' in another field of the form
may not
pass in the submit button value as part of the form scope. In
this case
you'd want to check for another one of the form variables,
ideally a
required field.
trojnfn wrote:
> I have a form that submits to itself. My submit is the
standard :
> <input type="submit" name="btnsubmit" value="Submit
Your Order">
>
> When the form is submitted, I check for the existence of
btnsubmit using
> paramerexists or isDefined :
> <cfif parameterexsits(btnsubmit)>
> perform inserts, etc.
> </cfif>
>
> This works fine. But my question is what do I do if the
type=button instead of
> submit ? For example
> <input type="button" name="btnSubmit" value="Submit
Your Order">
>
> I have some javascrpt validation that will submit the
form when the button is
> clicked. Howver, how do I determine whether the button
was seleceted or not, so
> that I can do my processing (insert, etc. ) ? I tried to
use the isDefined or
> parameterexists like before but that does not work ?
>
> What is the command to check that a button was selected
>
Michael Evangelista, Evangelista Design
Web : www.mredesign.com
Forums: news://forums.mredesign.com
Blog : www.miuaiga.com

How to check for 12-bit versus 16-bit audio?

Similar Messages

Maybe you are looking for