How to check for broken links on my remote site?
How can I check for broken links on my _remote_ site using DW10 (i.e. DWCS4)?
I know of the Link Checker tab so as to check the local site.
I've been using the app Integrity to do this, but it would be convenient to be able to also do this in DW.
Running OS X 10.8.2.
Thanks for any advice.
Ron
Over the years I've had both happen.
I'm not saying this happens often... it doesn't... but it does happen.
And this is with my site links working fine locally.
So it is either happening on upload or on the servers.
I can't tell you the number of times I've asked webhosts (I've had many) why a site is not working at all... and they have told me that they are either doing work on their servers or that they're 'upgrading' and moving my sites to another server. So perhaps this is part of the problem.
Again... rarely happens but it does happen.
Similar Messages
-
Is there a solution out there for checking broken links in a content area in Oracle Portal?
I think a third party products will check broken links by identifying links which return a 404 error.
Portal (at least 3.0.6.6.5) does not respond with 404 but gives WWC-46000. I doubt a third-party product will recognise this as a broken link.
Analyzing apaches log files is of no use either. The error log gives no entries, the access log shows apache has responded the request with HTTP-200 , which is correct if you see the problem from Apache. Apache does a request to modplsql, a page is returned, and Apache passes it on.
The problem becomes somewhat more complicated if you consider access rights to folders. A link can be OK for userA, but can be broken for userB.
Ton -
Deleting songs and scanning for broken links.
I've encountered a couple weird problems today. I've read through every area of the preferences, right-clicked everywhere I can think of in the iTunes window to see what pops up in those menus, and can't find the solutions to my problems.
1) It used to be that when I tried to delete a song from iTunes, it would ask if I wanted to delete it from the PC. It doesn't do this anymore, but I really wish it did. Is there a way for me to delete something from my iTunes library AND my PC with one action?
2) Since I could not delete songs through iTunes, I went straight to where my music files reside and deleted them that way. I know iTunes can scan the library for broken links and stuff -- it's done it before, though I don't know what triggered it. How can I make it scan my list for broken links and remove them? I deleted something like 300 songs -- that's a lot of links to delete individually.
I'm not computer illiterate. I've right-clicked everywhere, gone through all the menus and the preferences menu and still can't figure out how to get iTunes to do these basic functions. It's really frustrating because I know it's done them before. Please help.open itunes, right click on the song you want to delete, click clear.. and why are we not allowed to give you a link. This is FREE help, and any link could have told you told you that.
-
How to check for a function module with its description and functionality
Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod -
Want to know how to check for new line character in text file
Hi All,
I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
Thanks
static int readandwriteFile(Logger logger,String filepath){
BufferedWriter out = null;
BufferedReader in = null;
File fr = null;
int get_count = 0;
try {
if(new File(filepath).exists())
fr= new File(filepath);
System.out.println("FileName: "+fr);
if(fr != null){
in = new BufferedReader(new FileReader(fr));
String text = in.readLine();
if(text != null){
get_count = Integer.parseInt(text);
in.close();
else{
get_count = 0;
else{
out = new BufferedWriter(new FileWriter(filepath));
out.write("0");
out.close();
} //Reading of the row count file ended.
catch(Exception e) {
e.printStackTrace();
finally {
try{ if (in != null) {
in.close();
if (out != null) {
out.close();
catch(Exception e) {
e.printStackTrace();
return get_count;
}You are calling the readline() only once which means you are reading only the first line from the file...
Use a loop (Do-While preferably)
do{
//your code
}while(text == "") -
How to check for the sub folder in the document library Is already Exist using CSOM?
Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
</Eq>
</Where>
</Query>
</View>",
@"/sites/test/hcl/"
+ InputFolderName);
Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
context.Load(listItems);
context.ExecuteQuery();
if (listItems.Count > 0)
retStatus =
true.ToString();
else
retStatus =
false.ToString();
catch (Exception ex)
retStatus =
"X02";
return retStatus;
thanks
SundharHi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support -
How to check for locks on a table inside a program?
Hi Gurus,
Kindly let me know how to check for a lock on a particular table inside a program.I know that we can see locks on table held by a user from transaction SM12 but my requirement is to check for lock on MARA/MARC/MARV if lock exist then bypass my code else do the code.
Kindly suggest or give code to check for a lock on a particular table.
Thanks in advance
SudiptoFAQ. Locked.
-
How to check for updates on SCM packages?
Hey guys,
I wondered for some time now how to check for updates on SCM packages, i.e. -git
or -svn ones. Updates for binary packages are automatically updated by pacman,
no problem there. Checking for updates on non-SCM packages from the AUR is
easily done with one of the various helper tools available (personally, I use
slurpy).
However, SCM packages can change without their PKGBUILD changing, so I'm not
notified that I should recompile and update them.
Is there a "proper" way of doing this? Am I missing something?
Thanks in advance!If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition. -
Where is the "check for purchases" link in the store menu?
I purchased music, and it shows up in my purchase history, but it didn't download. iTunes support told me to click the "check for purchases" link in the store menu, but for some reason (maybe I'm blind), I can't find it anywhere--can someone please tell me exactly where to look on the page? Thanks!
I opened my eyes, and lo and behold, there it was, on the top of the screen the store MENU, not the iTunes store page. Duh.
-
Does anyone know a way to script checking for modified links? I have written some export scripts and would like to add this safety check. The more scripts I provide our operators the less thinking they do. lol
-SteveTake a look at rasterItems and RasterLinkState… Modified is one of these…
-
Search for broken links to images
Is there an efficient way to search for broken links to
images?Hi there
I'm not sure if you are meaning to ask about links inside
topics that point to images that you are popping up or linking to
outright or if instead, you mean that some of the images that are
supposed to be displayed inside topics are maybe missing and you
wish to know about them.
One easy way to spot a missing image reference is by using
the Project Manager. Not sure if you are using RoboHelp 7, 8 or
older here, but if on 7 or 8 look in the Project Manager pod.
Otherwise it will be found on the left panel of the application.
Expand the Images pseudo folder and quickly scan the list of images
and expand sub folders inside. Any missing image should be listed
with a red x to indicate the status. You may then examine the image
properties to see which topic(s) is/are still referencing it.
Cheers... Rick -
How to check for impacts due to upgrade
We are plannining to upgrade from 4.7 to ECC6..How to check for impacts on FTP'S,shell scripts and RFC's etc due to the assesment..Please suggest
Hi,
FTP's and Shell scripts are OS dependant not SAP or Database dependant so there will be no change at all unless you upgrade OS too. RFC's are not afected as per guides, notes and my experience.
I´m doing an upgrade from 4.6C to 6.0 with connections with at least 10 systems and none of them had an issue during tests
Good luck -
How to check for bootblk on Disk
Does someone know how to check for bootblk on solaris disk.
If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition. -
Could someone please explain how to check for flashback, to a beginner?
Could someone please explain how to check for flashback, to a beginner? Thanks.
Install all of the available software updates. If you have flashback it will be automatically removed.
-
How do I place a link to a web site on my iPad screen? I have done this on my iPhone, but I don't remember how I did it. Getting old I guess. Thanks.
In Safari (on the page that you want the link for) press the icon of the box with the arrow coming out of it,select the 'Add To Home Screen' option, and then chose what you want to call it (as you can't change the name after it's saved).
Maybe you are looking for
-
Installing Adobe Reader & i get the following message "error 1324 path my documents or volume invali
installing Adobe Reader & i get the following message "error 1324 path my documents or volume invalid". Can anybody help. I have just installed windows 8 on my lptop..
-
Need instructions on how to order Tiger
I have the following system: PowerBook G4 (3.3) 17-inch Serial Number V73161WXMVZ OS 10.3.9 1 MB DDR SDRAM 55.88 GB hard drive with 6.2 GB free I want to upgrade to at least Tiger (10.4) or maybe even Leopard (10.5) if my system will support it. I w
-
Hi All, We have made a Vendor Bank Guarantee through F-57 with spl G/L indicator. Ran FBL1N to see the list of bank Guarantess for a particular vendor where the due date i.e. expiry date of bank Guarantee is also displayed. Now at the time of MIRO/Ad
-
My podcast shows a broken chain link in the image graphic area?
I ping and it gets received, but I don't see updates and my graphic has NEVER shown up?
-
Datafile containing rollback segment crashed
Hi, In one of our production box (oracle 8.1.7.4 and HP UX), datafile containing rollback segment crashed. To open the database, i commented rollback segment line in init file and started the db and brought the crashed datafile to offline for droppin