How to check for Oracle AS installation on Windows XP

How can I check to see if Oracle Application Server is installed on my machine? I am using Windows Service Pack 3.

also in Windows Services, you may find Like 4 or 5, depend on what you installed. they goes like
Oracle<instancename><oraclehome>ascontrol
Oracle<instancename><oraclehome>processmanager
and so on.
Regards

Similar Messages

  • Steps For Oracle10gR2  RAC installation on  windows 2003 enteprise edition

    can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

    Hi,
    Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
    Check: System architecture
    Node Name Available Required Comment
    rac11 unknown 32-bit failed
    rac22 unknown 32-bit failed
    Result: System architecture check failed.
    Can anyone throw more light to resolve this issue.
    Note that i have successfully does this on Windows 2003.
    Any help will be highly appreciable.
    Thanks
    Nilanjan

  • Oracle 9i installation on Windows 2003 Cluster

    Hi
    I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.

    Complete Guide is here
    http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm

  • SUNWsprox package with solaris 10 for Oracle 10g Installation....

    Hi
    I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
    Thanks
    Mohammed Tanvir

    Hi...
    I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
    The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
    Roger

  • Checking for Oracle Home incompatibilities ...

    While installing oracle client 10.2.0.4. I came across this error. See below
    Checking the Components installed in Oracle Home
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for Oracle Home incompatibilities ...
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Failed &lt;&lt;&lt;&lt;
    Problem: This software can only be installed into an existing Oracle Database 10g Oracle Home.
    Recommendation: Choose an existing Oracle Database 10g Oracle Home for installing this software.
    Solution:
    make sure you set ORACLE_HOME and more IMPORTANTLY make sure you are not imstalling client patch.
    You should install 10.2.0.1 /10.2.0.2 full client first before installing the patch. If you don't, hence the above error.
    Edited by: solara on 05-Feb-2009 09:13
    email : [email protected]

    Hi,
    I think the error message is quiet clear: You are installing a patch and the installer throws the error that cannot found an ORACLE_HOME to where the patch should be installed, and tells you to install a full client (10.2.0.1 or 10.2.0.2), set the variable ORACLE_HOME to the home of the recently installed client, and then apply the patch...
    Regards

  • How to check for a function module with its description and functionality

    Hi all,
    How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

    Hi,
    You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
    Say for example you need to search something regarding converstion.
    Search for * CONVERT * and press F4.
    If there is something specfic like converting date to something you can give
    DATE * CONVERT *
    OR
    CONVERT * DATE *  and press F4.
    Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
    Regards,
    Pramod

  • Want to know how to check for new line character in text file

    Hi All,
    I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
    Thanks
    static int readandwriteFile(Logger logger,String filepath){
              BufferedWriter out = null;
              BufferedReader in = null;
              File fr = null;
              int get_count = 0;
              try     {
              if(new File(filepath).exists())
              fr= new File(filepath);
                        System.out.println("FileName: "+fr);
                   if(fr != null){
    in = new BufferedReader(new FileReader(fr));
                             String text = in.readLine();
                             if(text != null){
                             get_count = Integer.parseInt(text);
                             in.close();
                             else{
                                  get_count = 0;
         else{                    
    out = new BufferedWriter(new FileWriter(filepath));
         out.write("0");
                out.close();
                   }          //Reading of the row count file ended.
              catch(Exception e) {
                   e.printStackTrace();
              finally {
                   try{               if (in != null) {
                             in.close();
              if (out != null) {
                             out.close();
              catch(Exception e) {
                        e.printStackTrace();
              return get_count;
         }

    You are calling the readline() only once which means you are reading only the first line from the file...
    Use a loop (Do-While preferably)
    do{
    //your code
    }while(text == "")

  • How to check if Oracle Data Access Components  is installed?

    How to check if  Oracle Data Access Components is installed and version on my computer?
    Also How to check if Oracle Data Provider is installed and version?
    TIA
    Steve42

    Regedit HKLM->Software->Oracle.  See what's there...
    At the very least, that can give you paths and can check file versions from there.

  • Where can I find Documentation for Oracle financial installation

    Hi
    Where can I find Documentation for Oracle financial
    installation as which all modules to be downloaded for linuk server etc
    here is what I have found
    ===================================
    Oracle9i Application Server, Version 1.0.2.2.2 CD Pack for Linux x86 [Act as Server][to be installed on main linux server]
    ===================================
    Oracle® Applications 11i Release 9 CD Pack for Linux x86     [Act as client][to be installed on client sean,AJ,Vinod]
    ===================================
    Internet Developer Suite (1.0.2.4.1) CD Pack (with iAS Pack) for Microsoft Windows (32-bit)
    ===================================

    user11872870 wrote:
    Hi Tubby,
    http://www.quest.com/documents/list.aspx?SearchOff=true&ContentTypeID=20&prod=1
    This link has many pdf files but none has the useful information. Those pdf's are just 2 or 3 pages each.Sad Christmas for you then i suppose.
    Perhaps you could contact the vendor (quest) and get them to help you in your search for whatever it is you're looking for. An Oracle SQL and PL/SQL forum is not the venue for this, please mark the question as answered, and good luck in your search.

  • How to check for the sub folder in the document library Is already Exist using CSOM?

    Hi,
    My requirement is to create the  folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
    I able to check for the parent folder.
    But cant able to check the subfolder in the document library.
    How to check for  the sub folder in the document library?
    Here is the code for the folder
    IsFolder alredy Exist.
    private
    string IsFolderExist(string InputFolderName)
    string retStatus = false.ToString();
    try
    ClientContext context =
    new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
                context.Credentials =
    CredentialCache.DefaultCredentials;
    List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
    FieldCollection fields = list.Fields;
    CamlQuery camlQueryForItem =
    new CamlQuery();
                camlQueryForItem.ViewXml =
    string.Format(@"<View  Scope='RecursiveAll'>
    <Query>
                                            <Where>
    <Eq>
    <FieldRef Name='FileDirRef'/>
    <Value Type='Text'>{0}</Value>
                                                </Eq>
    </Where>
    </Query>
                                </View>",
    @"/sites/test/hcl/"
    + InputFolderName);
                Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
                context.Load(listItems);
                context.ExecuteQuery();
    if (listItems.Count > 0)
                    retStatus =
    true.ToString();
    else
                    retStatus =
    false.ToString();
    catch (Exception ex)
                retStatus =
    "X02";
    return retStatus;
    thanks
    Sundhar 

    Hi Sundhar,
    According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
    Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
    public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
    ClientContext clientContext = new ClientContext(siteUrl);
    List list = clientContext.Web.Lists.GetByTitle(libName);
    CamlQuery camlQuery = new CamlQuery();
    camlQuery.ViewXml =
    @"<View Scope='RecursiveAll'>
    <Query>
    <Where>
    <Eq>
    <FieldRef Name='FSObjType' />
    <Value Type='Integer'>1</Value>
    </Eq>
    </Where>
    </Query>
    </View>";
    //camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
    camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
    ListItemCollection items = list.GetItems(camlQuery);
    clientContext.Load(items);
    clientContext.ExecuteQuery();
    Console.WriteLine(items.Count);
    if (0 == items.Count)
    //create sub folder here
    Best regards
    Patrick Liang
    TechNet Community Support

  • How to check your oracle is 32 bit or 64 bit?

    How to check your oracle is 32 bit or 64 bit on windows?

    SQL*Plus has it's own banner that gives the same information
    >
    SQL*Plus: Release 11.1.0.6.0 - Production on Thu Jun 7 11:19:06 2012
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    Enter user-name:
    >
    Just make sure that you run the right version if there are multiple versions installed on the machine.

  • How to check for locks on a table inside a program?

    Hi Gurus,
    Kindly let me know how to check for a lock on a particular table inside a program.I know that we can see locks on table held by a user from transaction SM12 but my requirement is to check for lock on MARA/MARC/MARV if lock exist then bypass my code else do the code.
    Kindly suggest or give code to check for a lock on a particular table.
    Thanks in advance
    Sudipto

    FAQ.  Locked.

  • How to check for updates on SCM packages?

    Hey guys,
    I wondered for some time now how to check for updates on SCM packages, i.e. -git
    or -svn ones. Updates for binary packages are automatically updated by pacman,
    no problem there. Checking for updates on non-SCM packages from the AUR is
    easily done with one of the various helper tools available (personally, I use
    slurpy).
    However, SCM packages can change without their PKGBUILD changing, so I'm not
    notified that I should recompile and update them.
    Is there a "proper" way of doing this? Am I missing something?
    Thanks in advance!

    If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
    /usr/platform/platform-name/lib/fs/ufs
    directory where ufs boot objects reside.
    An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition.

  • MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

    OS:WINDOWS 2000 SERVER
    DB:8I
    FORMS:6I
    I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
    BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
    WHERE I CAN DO THIS CONFIGRATION
    Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
    This file gives details of the configuration steps done for you by the installation process
    (marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
    this file and perform the requested actions.
    [ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
    [ACTION] Please configure the following virtual path with your web listener: /dev60temp for
    physical directory F:\devnt\tools\web60\temp.
    [INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
    the Forms Server.
    [ACTION] Please configure the following virtual path with your web listener: /forms60java for
    physical directory F:\devnt\FORMS60\java.
    [ACTION] Please configure the following virtual path with your web listener: /dev60html for
    physical directory F:\devnt\tools\web60\html.
    [ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
    physical directory F:\devnt\tools\web60\cgi.
    [INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
    created for you in the Oracle Forms program group.
    [ACTION] Please configure the following virtual path with your web listener: /jinitiator for
    physical directory F:\devnt\JINIT.

    Hi Guys,
    Any help on this request will be very helpful.
    Thanks,
    Ashok Kumar.G

  • How to check version Oracle Datawarehouse Builder

    How to check version Oracle Datawarehouse Builder?
    thanks alot

    How do you check which version you have of the Oracle Datawarehouse Builder ?
    Opatch gave an error, so is there any other method to check it?

Maybe you are looking for