How to check for transportation cost is greater then delivery cost??

Hi all,
My customer dont want to be billed if the cost of the delivery is lesser then the transportation cost...
i.e if the total delivery cost is $1000..
and transport cost is $1200
then what check should put in the configuration???
please reply ASAP...

hi Deep Blue
you need to check use the user exit of delivery save. It seems that you need check the route in delivery by that you can check the delivery cost for that route and taking reference of the sales order of the item you need to find out the billing value after comparing you cand decided on saving the delivery document.
Just try if you require any more input please let me know

Similar Messages

How to solve the error "Ref Count for this object is greater then 0"

Hi,
I'm trying to add UDF at runtime to an already created UDT which is of No Object Type.
my code is as follows:
dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
oUserFieldsMD = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
oUserFieldsMD.TableName = "@TI_ADDCODES"
oUserFieldsMD.Name = codetoinsert
oUserFieldsMD.Description = desctoinsert
'Add the field to the table
   lRetCode = oUserFieldsMD.Add
   If lRetCode <> 0 Then
   ocompany.GetLastError(lErrCode, sErrMsg)
   MsgBox(sErrMsg)
    Else
    MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
    End If
I got error msg as "Ref Count for this object is greater then 0" and error code is -1120
how to rectify it?
Thanks in advance!!!

Hi,
Have you searched the forum? You may check this first: error -1120 when adding UserTableMD.
Thanks,
Gordon

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

Want to know how to check for new line character in text file

Hi All,
I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
Thanks
static int readandwriteFile(Logger logger,String filepath){
          BufferedWriter out = null;
          BufferedReader in = null;
          File fr = null;
          int get_count = 0;
          try     {
          if(new File(filepath).exists())
          fr= new File(filepath);
                    System.out.println("FileName: "+fr);
               if(fr != null){
in = new BufferedReader(new FileReader(fr));
                         String text = in.readLine();
                         if(text != null){
                         get_count = Integer.parseInt(text);
                         in.close();
                         else{
                              get_count = 0;
     else{
out = new BufferedWriter(new FileWriter(filepath));
     out.write("0");
            out.close();
               }          //Reading of the row count file ended.
          catch(Exception e) {
               e.printStackTrace();
          finally {
               try{               if (in != null) {
                         in.close();
          if (out != null) {
                         out.close();
          catch(Exception e) {
                    e.printStackTrace();
          return get_count;
     }

You are calling the readline() only once which means you are reading only the first line from the file...
Use a loop (Do-While preferably)
do{
//your code
}while(text == "")

How to check for the sub folder in the document library Is already Exist using CSOM?

Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
            context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
            camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
                                        <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                                            </Eq>
</Where>
</Query>
                            </View>",
@"/sites/test/hcl/"
+ InputFolderName);
            Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
            context.Load(listItems);
            context.ExecuteQuery();
if (listItems.Count > 0)
                retStatus =
true.ToString();
else
                retStatus =
false.ToString();
catch (Exception ex)
            retStatus =
"X02";
return retStatus;
thanks
Sundhar

Hi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support

How to check for locks on a table inside a program?

Hi Gurus,
Kindly let me know how to check for a lock on a particular table inside a program.I know that we can see locks on table held by a user from transaction SM12 but my requirement is to check for lock on MARA/MARC/MARV if lock exist then bypass my code else do the code.
Kindly suggest or give code to check for a lock on a particular table.
Thanks in advance
Sudipto

FAQ. Locked.

How to Check for budget in WBS Element ?

Is there any mechanism to check if budget has been exceeded, in the respective WBS Element, while at or before approval of manhours in CAPP. It so happens manya time that, times are getting approved, and CAT5 Errors are taking place due to shortage of budget. How can we pro-actively check for budget being exceeded, and then avoid budget errors during CAT5 runs? Any suggestions?

Hi
You need to activate budegt availability control
Budget Control at WBS level
Budget Control at WBS level
Control Budget Across Projects
Control Budget Across Projects
Thanks
S.Murali
Edited by: S. Murali on Jul 15, 2009 6:54 PM

How to check for updates on SCM packages?

Hey guys,
I wondered for some time now how to check for updates on SCM packages, i.e. -git
or -svn ones. Updates for binary packages are automatically updated by pacman,
no problem there. Checking for updates on non-SCM packages from the AUR is
easily done with one of the various helper tools available (personally, I use
slurpy).
However, SCM packages can change without their PKGBUILD changing, so I'm not
notified that I should recompile and update them.
Is there a "proper" way of doing this? Am I missing something?
Thanks in advance!

If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition.

Check for Maintenance Cost Budgeting

Dear All,
From EHP 5, there is one button in Order create/change screen called "Check for Maintenance Cost Budgeting", but couldn't find any documentation regarding it. I want to know total functionality of that button. Can anyone help me regarding this?

From Solution Browser:
Functionality Enhancements
For critical, high-value maintenance orders, it is essential for the planner to check to see if enough budget provision is available for maintaining a technical object. Based on the results, the planner can request approval for the order and the cost controller can approve the work. The budget forecast is retracted from the maintenance cost budget. Actual utilization is calculated based on past orders and work in progress.
[ECC 6.0 EHP 5 Version for SAP PM|http://erp.fmpmedia.com/Search.aspx]

How to check for impacts due to upgrade

We are plannining to upgrade from 4.7 to ECC6..How to check for impacts on FTP'S,shell scripts and RFC's etc due to the assesment..Please suggest

Hi,
FTP's and Shell scripts are OS dependant not SAP or Database dependant so there will be no change at all unless you upgrade OS too. RFC's are not afected as per guides, notes and my experience.
I´m doing an upgrade from 4.6C to 6.0 with connections with at least 10 systems and none of them had an issue during tests
Good luck

How to check for bootblk on Disk

Does someone know how to check for bootblk on solaris disk.

If your system is booting then u can say that your bootblks are installed.Usually BootBlks are present in 0 & 1 slice of UFS Filesystem
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
An x86 FDISK partition for the Solaris software begins with a one-cylinder boot slice, which contains the partition boot program (pboot) in the first sector, the standard Solaris disk label and volume table of contents (VTOC) in the second and third sectors, and the bootblk program in the fourth and subsequent sectors. When the FDISK partition for the Solaris software is the active partition, the master boot program (mboot) reads the partition boot program in the first sector into memory and jumps to it. It in turn reads the bootblk program into memory and jumps to it. Regardless of the type of the active partition, if the drive contains multiple FDISK partitions, the user is given the opportunity to reboot another partition.

How much does TES transporter cost?

How much does TES transporter cost?

Please email me your contact information and I'll reach out to you ASAP.
A.Grissom
[email protected]
Virtual Sales Specialist
Cisco Systems

Could someone please explain how to check for flashback, to a beginner?

Could someone please explain how to check for flashback, to a beginner? Thanks.

Install all of the available software updates. If you have flashback it will be automatically removed.

How to check whether transport path exist between two systems in sld??

Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.

<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S

HT6114 how to check for malware on my mac

My macpro is running slow all of a sudden. How do i check for malware?

No need, really. You've shown no evidence that malware would be causing the issue. Furthermore, OS X has its own built-in anti-malware protection. It's unlikely your problem is due to malware. See the following:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

How to check for transportation cost is greater then delivery cost??

Similar Messages

Maybe you are looking for