How to check full version number of IPlanet 6.0
How would I check for the full build number of IPlanet 6.0 web server. This is on a Solaris 8 server, with SunOS 5.8.
Hi,
it's shows the support pack level of kernel.
patch 133 is quiet old you need to upgrade your kernel.
check Note 19466 - Downloading SAP kernel patches
regards,
kaushal
Similar Messages
-
How to Check ADI Version With Patch Number?
how to Check ADI Version With Patch Number?
Hi,
To find-out the version of 'Web ADI' , there are two methods
Method : 1
+. Login to Oracle E-business Suite and using 'Web ADI' , create a Document.
+. When Excel is launched with the created Document, a Menu is created on the Toolbar in Excel called Oracle (in between Data and Window).
+. From the Oracle menu select "About". A pop up window is displayed with the version of 'Web ADI' (something like 8.x.x.x)
Method : 2
+. Login into E-business Suite as System Administrator
+. Once the Home Page is up, paste the URL below into the same Browser window (replace hostname,domain and portnumber as applicable)
BNE ADMIN Servlet for 11i
http://hostname:portnumber/oa_servlets/oracle.apps.bne.framework.BneAdminServlet
BNE ADMIN Servlet for 12
http://hostname:portnumber/OA_HTML/BneAdminServlet
Cheers
Ajikumar G
http://oracleajidba.blogspot.com/
Edited by: Ajikumar G on May 11, 2010 2:19 PM -
how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris
If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg -
[AS] How to check document version?
Hi,
Does anyone know how to check the version of a Indesign file using Applescript? Is it possible to detect if a file is created in CS 5.5, 6, CC, CC2014 ?
Can this be done without opening the file ?
ThanxTry looking here
Re: [Ann] Identify Your InDesign File -
How to check ISA version?
HI,
We have ISA installed but I dont know how to check the version of what version of ISA is installed. It's ABAP+JAVA. Can some one help regarding this? I have tried system>>status>... nothing showing about ISA.
Your help is really appreciated.
Thanks,
Points will be given for sure.Hi Afi...
Go to SPAM.. and check all packages you should be able to find the component version ans SP level.
Not sure about this but...as far as i know ISA (Internet Sales) goes together with CRM so it must be the same version (i think)
Regards
Juan -
How to check DART version??
Hi All,
Can you please tel me how to check DART version??
Regards,
AnuHello All,
Everyone is asking how to check the release stand for Dart in 46C. The answers are ok over Se11 but there is a little more to it than looking in se11 like in the releases 47 and newer as in 46C the type group is hidden.
Here is how to find the release information:
47 and newer: SE11 Type group enter "Dart1" and view. The info is under Dart release
46C Se11, click Utilities and choose "other Dictionary Objects" enter Dart 1 in typ group
Hope this helps everyone out
Regards
mark -
How to check kernal version & Tp..
how to check kernal version & Tp..
check
tp -V at os level
or login to SAP then follow
System --> Status --> Other Kernel info ( <shift+F5> )
Thanks
Prince Jose -
How to check IGS version and procedure for upgrading IGS patch level
Hi all,
We are on BIW 3.5 .Iam not clear about how to check the version of IGS and its patch level .I went through various notes but still iam confused with tracing it , can someone plz help out?
Secondly want to upgrade IGS version i went through note 454042 but still confused with doing that , Can someone plz refer other notes or detailed procedure for upgrading IGS.
Our BIW Production and Test are on AIX and Development is on HP-Unix OS .
Points guaranteed for the same. Requested to revert at earliest as this is urgent .
Regards,
SaumyaHi,
Check this link which may help u:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/igs-upgrade-1455477
The installation/upgrade procedures for the integrated IGS are as follows:
Integrated Version Installation
The integrated IGS is automatically installed with the SAP Web Application Server.
Integrated Version Upgrade
You find the upgrade files for the integrated IGS version on the SAP Service Marketplace:
http://service.sap.com/swdc ® Download ® Support Packages and Patches ® Entry by ApplicationGroup ® SAP Frontend Components ® SAP IGS ® SAP IGS .
There, you find the IGS executables and libraries (igsexe_.sar) as well as the IGS folder structure (igshelper_.sar) containing among others font files.
With the upgrade files of the executables and libraries, proceed exactly like you would with kernel patches (for example, extract the Archive to the same location). More information about kernel patches can be found in the related note 19466 in the section Copying and Installing a Patch.
The upgrade files for the IGS folder structure must be extracted to the instance directory (DIR_INSTANCE). More information can be found in note 1028690.
After a restart of the Web AS the new IGS is up and running.
Information about finding out your IGS patch level is provided in note 931900.
For an upgrade of an integrated IGS please also check note 896400.
For more info check this SAP Help doc:
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
Hope these helps u...
Regards,
KK. -
How to check which version of Jdk installed on the machine?
How to check which version of Jdk installed on the machine?
& Which version of Oracle Insatlled on my machine?String version = System.getProperty("java.version"); %
-
How to determine full version of latest adobe reader
Hi,
How can I determine full version of latest Adobe Reader without installing Adobe Reader?
I mean I need to know 4th digit of version, it is the most important for me.
Adobe Shockwave and Flashdownload pages provide such informations via JSON from
HTTP request.
Reader download website shows me only 3 digits 10.1.3 and I need to read 10.1.3.23
to automate my security checker.
Thanks in advance for reply.
Daviddaviddavid3 wrote:
No it's not true. latest version is 10.1.3.23.
Latest digit is probably security patch.
The latest digit is the build number. This may be different for different modules; you may find DLLs that have a higher build number than AcroRd32.exe
If there is a new security release, it will be identified by the first three digits. -
Hi Guys
I have a SCCM 2012R2 in Windows 2008R2 box with a Secondary Site also in Windows 2008R2. Before proceeding with the upgrade to CU3 I took a snapshot, installed Windows Management Framework 4.0 to get PowerShell 4.0 in order to run a health Check, all
fine until this point.
I installed CU3 and checked that the value in CULevel in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Setup is 3 and also check the
version that is displayed in the About System Center Configuration Manager dialog box is
5.00.7958.1401
I checked the log file C:\Windows\Temp\cm12-r2cu3-kb2994331-x64-enu.log and all good in there as well. So it's fair to say the installation was successful..??
the next step was to upgrade my secondary site from the Primary site console, so I went to Administration / Site Configuration / Sites and when I right clicked my Primary Server to check its properties I realised that the Version number was still
5.00.7958.1000 and the option to upgrade my secondary site is greyed out.
I haven't been able to find any information regarding this issue, in fact I am not sure if is a technical issue or human issue :)
the questions are, how do I upgrade my secondary site and why the difference in between version?
Regards
Jesus GonzalezWorks as dessigned. The site version number will only show the version of the latest major build, which is R2 in your case. The same with upgrading your secondary site, that's only possible via the console, with a major build. For upgrading your secondary
site you can now use the created package R2 CU3 - server update.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
How to download full version of Illustrator?
I sent an invitation from the Team version to one of my employees. The download selection sheet show "install" for many of the apps, but for Illustrator (AI) it show "try" and when they download, it gives them a 30 day trial version and asks for a serial number to activate. How do I get a full version rather than a 30 day trial? I sent three invitations and they all worked except for this one.
It is pretty big. How fast is your download. Takes me about 3-6 hours to download a typical Adobe app.
-
How to get extension version number to update in exchange panel.
I was able to upload my Illustrator extension, set it to private and share it. Brialliant functionality. Now I have released a point update, and although it shows the correct version in the extension details on the Adobe Exchange website, the version number will not update in the panel itself, although my description modifications update just fine. The extension as shown in the "Not Published" list of the sight has the old version number. When I click on it to get to the main extension page, it shows the correct version number in title and in also correct in the details on the right. It does say "(Preview)" after the name. I don't intend to ever sell it, but want to keep sharing it privately. How do I get it to recognize version updates?
ThanksHi there,
It sounds to me like the reason your new patch (with the updated product version) is not showing in the panel is that it has not been "published". If it's showing up in the "Not Published" screen, this means that it's only available for you personally to make changes to in the producer portal - once you're finished making your changes (uploading a new ZXP etc.) you need to click Submit (with Auto-Publish) to make the new version go live to the people it's shared with (and show up in the panel). As long as the product is set to Private, clicking Submit (with Auto-Publish) will not make the product available publicly - it will continue to be private, visible only to the groups you specify.
Fraser -
Hi
I have windows XP installed and I want to know what version of JDK is installed. Can anyone know how to check that?
Thanks,
VishalVishal,
File "ojdbc6.jar" is available for donwload from:
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_111060.html
Good Luck,
Avi. -
How to downlaod full version of adobe photshop 7.0 i have only 30 days trail version
hey i am new in this forum and using adobe photshop 7.0 trial version but after 30 days it not work and display meassage to buy full version how can i extend its free version.
If you want to play, you have to pay, otherwise go away!
-Noel
Maybe you are looking for
-
I have a 3G Touch and my son has a 4G. We have an older Airport Express that is joined to our wireless network. The AE is connected to a set of powered speakers. It works great to play music from iTunes. I have never had a problem. The Mac is connect
-
My Mac will not let me download any new updates. I have Mac OS X Version 10.4.11, and I cannot download any new updates. This disables me to update Itunes which is the problem in the first place. How would I fix this?
-
Problem video streaming?
when i try to watch episodes on hulu or abc.com, the video doesnt' play, it's just a black screen...why is that? yesterday it was working fine. It doesn't even seem to load, nothing.
-
Thread was being aborted Exception while creating large number of Sites in SharePoint 2013
Hi All, I am getting threading exception while creating a large extent of sites in SharePoint 2013. I am reading data from an excel file and then looping each row. The sites are creating for first two rows then i am getting exception. This code worki
-
OneDrive Folder Invisible in Lightroom 5.5
I keep a selection of working images in OneDrive (Windows 8.1) to work on in various locations. I can't see the folder in Lightroom 5.5 so can't import into the app. Is there a workaround for this or am I missing something? Cheers, Simon