How to check hacking attempts ?

Hi all;
Is there anyway to check who is trying or have tried to hack network ? I am using ASA 5520 firewall. Is there any command to check it ?
Thanks.

Hi,
You can start by using the 'show local-host' command. This would show you if there's multiple attempts for a half-opened TCP sessions. You could narrow it down to known IP such as servers.
Sent from Cisco Technical Support iPhone App

Similar Messages

  • How to check CRL validity time from client?

    Hello,
    I have one Windows Server 2003 R2 working as Standalone CA. It provides certificate for one of our internal IIS website.
    I have decreased CRL publish interval from 1 week -> 1 day and Published new CRL.
    However, our webserver is propably not aware of new CRL publishing interval changed on CA, because I suppose webserver has cached CRL locally.
    My question is, how to check cached CRL validity time from our webserver? Its running Windows Server 2003 R2.
    I attempted to run following command on webserver with 0 results: certutil -urlcache crl

    You basically have to wait it out when you are running an 11 year old operating system
    The certutil -urlcache CRL command was introduced in Windows Server 2008/Vista.
    The deletion/inspection of cached CRL data was not really an option in Server 2003
    Brian

  • How to check up Integrity of basis on the server ?

    How to check up
    1. Integrity of basis on the server
    2. Presence of necessary fields in bases
    Why ask ?
    There is for a long time imported in ZCM station XP.
    In properties of agent ZCM at this station I see that all politicians are applied successfully.
    In the https://zcmserver | ws Xp_KAP| Relationships | Assigned Policies | Inherited
    for Dynamic Local User Policy "01UsersRightsDLU" Deployment Status = Unknown.
    If remove (unreg) from ZCM this WS and import Again - all properies will be OK...
    ( I have some such for a long time imported machines with similar problems. )
    Serg

    Originally Posted by AndersG
    Skoltogyan,
    > Thanks. I will look forward to hearing
    Sorry. I shuould have spotted that myself. The command you entered is wrong. You entered:
    /opt/zdc # ./zdc verify -b /var/opt/novell/zenworks/database/zenworks_AMI_COMPANY_ZONE.db
    Should have been:
    /opt/zdc # ./zdc verify -b /blabla/zcm_10.x.x.zdc
    Ie you enter the full path to the baseline file, not the database for -b
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Novell has a new enhancement request system,
    or what is now known as the requirement portal.
    If customers would like to give input in the upcoming
    releases of Novell products then they should go to
    http://www.novell.com/rms
    cd /opt/zdc
    ./zdc verify -b
    and in the log-file get 3 errors:
    1)
    + Initializing native libraries.
    [ERROR] [ZDCNative]
    [!] Could not load native library, native features will be disabled
    [DEBUG] [ZDCNative] /opt/zdc/lib/native/libzdcnative.so: librpm-4.4.so: cannot open shared object file: No such file or directory
    java.lang.UnsatisfiedLinkError: /opt/zdc/lib/native/libzdcnative.so: librpm-4.4.so: cannot open shared object file: No such file or director
    y
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(ClassLoader.jav a:1751)
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java :1676)
    at java.lang.Runtime.loadLibrary0(Runtime.java:822)
    at java.lang.System.loadLibrary(System.java:993)
    at com.novell.zenworks.zdc.system.platform.ZDCNative. initialize(ZDCNative.java:20)
    at com.novell.zenworks.zdc.system.platform.ZDCNative. <clinit>(ZDCNative.java:33)
    at com.novell.zenworks.zdc.DiagnoseZen.startZDC(Diagn oseZen.java:105)
    at com.novell.zenworks.zdc.DiagnoseZen.start(Diagnose Zen.java:64)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.novell.zenworks.zdc.boot.Bootstrap.main(Bootst rap.java:110)
    [INFO ] [DiagnoseZen]
    + Attempting to connect to database.
    [TRACE] [DatabaseConnector] Establising JDBC connection.
    [TRACE] [DatabaseConnector] JDBC connection established.
    [INFO ] [DiagnoseZen]
    2)
    [ERROR] [ZDCNative]
    [ERROR] [FileVerifier] File '/opt/novell/zenworks/share/tomcat/webapps/zenworks-reportadmin/WEB-INF/web.xml' is missing!!!
    [ERROR] [FileVerifier] File '/opt/novell/zenworks/share/tomcat/webapps/zenworks-reportadmin/WEB-INF/classes/com/novell/zenworks/webservice/reportadmin/ReportAdminImpl.class' is missing!!!
    [ERROR] [FileVerifier] File '/opt/novell/zenworks/share/tomcat/webapps/zenworks-reportadmin/WEB-INF/classes/com/novell/zenworks/webservice/reportadmin/ReportAdminTieSkeleton.class' is missing!!!
    [ERROR] [FileVerifier]
    3)
    [TRACE] [DBObjectComparer] Constraint 'fk_zDevice_ZUID' is okay.
    [TRACE] [DBObjectComparer] Comparing Triggers
    [ERROR] [DBObjectComparer] Mismatch in Trigger 'tg_IsRetired_Ins_Upd' structure!!!
    Expected: [Name: tg_IsRetired_Ins_Upd, Table: zDevice, Definition hash: 5e61ed8]
    Found : [Name: tg_IsRetired_Ins_Upd, Table: zDevice, Definition hash: d789549a]
    [DEBUG] [DBObjectComparer] Additional Information:
    create trigger -- when zDevice is retired or unretired let NC_Workstation know
    tg_IsRetired_Ins_Upd after update on
    zenadmin.zDevice
    referencing old as oldtable new as newtable
    for each row
    begin
    declare @Retired1 tinyint;
    declare @RetiredDate1 datetime;
    declare @ZUID1 binary(16);
    if(newtable.Retired <> oldtable.Retired) then
    set @Retired1=newtable.Retired;
    set @ZUID1=newtable.ZUID;
    if(@Retired1 = 1) then
    set @RetiredDate1=newtable.RetiredDate;
    update NC_WORKSTATION set
    NC_WORKSTATION.IsDeleted = @RetiredDate1
    where NC_WORKSTATION.ZenWorksAgentID = @ZUID1;
    update NC_COMPONENT set
    NC_COMPONENT.IsDeleted = @RetiredDate1
    where NC_COMPONENT.IsDeleted is null
    and WORKSTATIONOID = any(select WORKSTATIONOID from NC_WORKSTATION where ZENWORKSAGENTID = @ZUID1)
    else
    set @RetiredDate1=oldtable.RetiredDate;
    update NC_WORKSTATION set
    NC_WORKSTATION.IsDeleted = null
    where NC_WORKSTATION.ZenWorksAgentID = @ZUID1;
    update NC_COMPONENT set
    NC_COMPONENT.IsDeleted = null
    where NC_COMPONENT.IsDeleted >= @RetiredDate1
    and WORKSTATIONOID = any(select WORKSTATIONOID from NC_WORKSTATION where ZENWORKSAGENTID = @ZUID1)
    end if
    end if
    end
    [ERROR] [TableHelper]
    [!] 1 errors found while verifying Triggers of Table zDevice
    [DEBUG] [TableHelper] Verifying table 'zDeviceCreationInfo'
    [TRACE] [DBObjectComparer] Comparing Columns

  • How to check weather my i phone is officially unlock of not

    Hi everyone
    Recently i got iphone 3g , but im not sure how to check weather its officially unlock or not. So that i should upgrade the os with locking it.
    Serial no 5K9098AKY7K
    Model MB496X
    IMEI 01 180900 090330 3
    Plz help me out

    Look i bought it from open market in pakistan
    Then there is no way to confirm that your phone was officially unlocked. Buying from a non-official source, especially an "open market", means you're at the mercy of the seller as to the accuracy of the phone's status. Based on postings here, most of these phones have been hacked. You'll find out for sure though if you update to 3.1.3.

  • How to check a network connected system is in power on?

    How to check whether a network connected system is in power on through its ip address? Is there a simple way in java to check that?
    Thanks

    How to check whether a network connected system is in
    power on through its ip address? Is there a simple
    way in java to check that?If you know that it normally has a server listening on a given port, then you can try to establish a connection on that port.
    If the connection succeeds, it's powered on.
    If the connection fails, you cannot know whether it's powered on or not. It may be on, but the server isn't running. It may be on with server running but the network path to that host may have a problem. It may be on, server running, good network path, etc., but the server may be very busy and the connection attempt may timeout. etc.

  • HT201304 How to check what is owed on your iTunes account

    Does anyone know how to check your iTunes account to see how much you owe

    DevSquare wrote:
    Well that is entirely incorrect.
    I'm not sure where else in the world you can but in Australia you can have Debit Cards which are linked to your main Bank Account. These work as Credit Cards but use the balance in you Main Account. So there is no fees incurred and its very simple to use.
    I have purchased apps from the store before and didnt realise that I didn't have the money in my account but it still let me buy it. Thus put my account into a negative and I had to fix the amount before my next purchase.
    It's a good idea to research what you're telling the community because people really rely on a comprehensive response.
    As for the OP: The feature to see how much you owe used to display upon re-entering your Security Code on your card when you had sufficient funds. Now when you have brought the balance from a negative it will send you a reciept.
    Good Day
    I'm sorry,but entirely incorrect?
    According to Apple's own Article on the subject, they attempt to bill in a specified order.
    Order of iTunes billing methods
    When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
    iTunes Store: How iTunes Store purchases are billed
    http://support.apple.com/kb/HT5582
    Nowhere does it say "we let you download if you don't have enough balance and then you can settle with us".
    Also its possible your debit card has a provision in Australia to allow the charge if there's not enough balance and the charge is below a certain threshold. In which case you would have to settle the pending balance with your bank, not iTunes directly.
    In any case, if you try to purchase something without enough credit on your accepted form of payment (which incidentally does not include Debit cards) then the charge will not happen and no download should ocurr.
    This I've seen many times. If my iTunes card balance is not enough, and my credit card limit has been reached (yes its happened a few times) I cannot download anything. I've seen it happen with friends too several times. 
    There is just no conceivable way iTunes would allow you to owe the system money, because it would be a logistics nightmare. Apple is not in the business of collecting past dues. There's no way they would allow that to happen.
    Best case, you settled with your Bank not directly with iTunes.
    With that said, I think its a little rude to claim the entire statement is incorrect. Clearly there were parts that were accurate and correct.
    There may have been a discrepancy with your experience, but the answer is based on research, of Apple's own statements, and articles which is at this point the Authority on how their billing works. If there's a difference in Billing in Australia, I cannot say, it very well may be, as far As I know based on reading Apple's articles, and my own experience, is there is no way to owe iTunes directly.
    So to you I say, unless you have concrete evidence, of more than one case, and a somewhat fuzzy one at that, refrain from stating other people's answers are entirely incorrect.
    Notice I never said your statement was entirely incorrect, which it very well may be.

  • How to check that iPhone 4 is factory unlock or not

    how to check an iPhone is factory unlock or not

    There is no way to check. This question gets asked all the time, and the simple fact is if you purchased your phone from an official source that sells officially unlocked iPhones, your phone is officially unlocked. If you didn't purchase from an official source, there is a good chance it was hacked.

  • How to check that iphone 4 is factory unlocked

    I have bought my first iphone 4 yesterday...its has iOS 4.3.5 (8LI)....i m using local sim and vedor said that it is factory unlocked but i don't have any idea that how to check this....i want to upgrade my iOS to iOS 5....PLZ guide me....
    thanks

    There is no way to check. This question gets asked all the time, and the simple fact is if you purchased your phone from an official source that sells officially unlocked iPhones, your phone is officially unlocked. If you didn't purchase from an official source, there is a good chance it was hacked.

  • How to check if application started succesfully

    Hi to all!
    I need a script to check if application and db side started succesfully after cold backup has finished. Db side can be tested by system tables. But how to check if all components of apps have been started succesfully ?
    Thanks in advanced

    If you need more extensive checking of your eBusiness environments you may want to check out the perl modules HTTP::WebTest and WWW::Mechanize. They allow you to check specific urls and login to the application via a script. You can do an end to end test of the login process. It doesn't work with forms but for the initial SSW screen they are very good.
    We do this to track our service levels and because we have integrated SiteMinder SSO into our environment which is not picked up by the Applications script. Also the SiteMinder service is controlled by an external organization.
    Does anyone know if the status script for oracle apps can pickup a jvm that has gone bad (ie. You attempt to login but the jvm process has had a problem and apache returns an error when you execute the jsp login page)?

  • How to check SSL/TLS Renegotiation Protocol Change?

    Hi:
    I am applying patch #12837860 (part of CPU jan 2012). The link below is the readme. I don't know how to check if I need SSL/TLS Renegotiation in step #8.
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=14106915#CHDECEJC
    8.After patching, see My Oracle Support Note 1301699.1, How the SSL/TLS Renegotiation Protocol Change Affects Oracle HTTP Server for more information on using SSL with Oracle HTTP Server.
    Would you please tell me how to check if I need and how to reset it? This is for EBS 12.1.3, DB 11.1.0.7, 10.1.2.3 and 10.1.34 on Linux.
    Thank you for your help in advance.

    Both. When you use the JSSE APIs you must explicitly initiate a rehandshake. Of course, if you are the responder and you receive a hello request or a client hello, you will respond to it. I'll have to think about if there is someway for the responder to reject a rehandshake attempt.

  • The database structure has been modified - how to check if it happend?

    Hello,
    I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
    My question is - does anyone know how to check if database structure has been modified?
    Regards,
    Hmg

    Hi Szymon,
    I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
    In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
    I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
    Satish.

  • How to check connection from SAP to reservation system?

    Dear Experts,
    May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
    Thanks.

    Hi
    You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
    For more information, see Technical Prerequisites for Travel Planning--
    Technical Prerequisites for Travel Planning
    Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
    Connection to an External Reservation System
    The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
    u2022 Availability query of travel services
    u2022 Transfer of additional information about selected travel services
    u2022 Price information
    u2022 Processing of reservation by the respective provider
    u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
    In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
    In order to carry out online booking via AMADEUS the following must have been carried out:
    u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
    u2022 A network connection to the AMADEUS computer center must have been opened
    u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    For questions about registration, contact the SAP & AMADEUS Competence Center:
    SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
    Cheers
    Mukta

  • How to check SSO user from database?

    Hi:
    I've posted this topic in Forms forum:
    How to check SSO user from database?
    then as I've been told, it's better to post it here, so ...... here is the question:
    I'm writing a "before delete trigger" to insert into log table before delete. Is there a way that I know from database the current SSO user when SSO users share one database user?
    Just like in Oracle Application Express there is v('APP_USER') to know the current user.
    Saad,

    End users are manipulating data through Oracle Forms(and SSO through portal) and the thing I need is to trace the SSO username from database without modifying forms, I mean purely from database taking into consideration that SSO users are sharing one database user. Is it possible?
    Saad,

  • How to check  if all values from a dataset  has come to  an internal table

    How to check  if all values from a dataset  has come to  an internal table ?

    Hi,
    After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
    Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
    For e.g.
    OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
        WRITE :/ 'No such input file' .
        EXIT.
      ELSE.
    READ DATASET p_inpfile INTO loc_string.
          IF sy-subrc NE 0.
            EXIT.
          ELSE.
            CLEAR loc2.
    *Spliting fields in the file-
            REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
           SPLIT wa_string AT const INTO loc2-pernr
                                           loc2-werks
                                           loc2-persk 
                                           loc2-vdsk1.
    Hope you get some idea.
    Thanks,
    Sakthi C

  • How to check vendor payment

    Hi gurus,
    how to check vendor payment is done are not in purchase order
    Regards
    murali

    Check through FBL1N vendor line item display, here you can check for the vendor libality generated during invoice (MIRO) posting once you get into the t-code FBL1N select the radio button open items only in line item selection give your vendor account, company code date (Key day at which the line items are open till now), and execute.
    In the report screen to help your self you can search using crtl + F and put reference as serach criteria.
    You will see the non cleared item the Status indicator tells you the line item is not yet cleared.
    BR

Maybe you are looking for