How to check if device bought is legit

Hey I just purchased a "brand new in box" q10 and I wanted to know if there is anyway to verify if the item is brand new and not refurbished etc.
Isthere any way to find out if the device was already registered or if it under warranty?
Thanks

Call BlackBerry technical support and ask them to verify if that device was activated before.
877-255-2377 BlackBerry technical support.
Let me know if this help.

Similar Messages

  • How to check registered devices?

    I have registered several apple items over the years. I can usually see what is registered only after I register a new item. Where can I actually go to see all the items that's registered in my account? I don't remember if I registered my new ishuffle or not and want to double check. Can anyone tell me?

    Hi mtai,
    Perhaps the info in This Thread will be helpful.
    ali b

  • I think my ex has access to my Icloud, how can I check what devices has access to my Icloud?

    I think my ex boyfirend has access to my Icloud and has his iphone connected to my Imessages. How can I check what devices are all on my ID?

    YOu can try siging into icloud.com
    But you should just change your icloud password.

  • How to check the hardware vendor of a particular device

    Hi every one
    in the recent interview i have taken he asked me a question like
    how to check the hardware vendor of a particular device
    ex: hard disk ,nic card ,ram
    Thanks in Advance.......

    hi
    depends on OS version
    in RedHat like distros e.g.:
    lspci, lsusb, ls...
    dmidecode|grep -i manuf
    kudzu -p -s
    on Solaris you can use these :
    dladm show-dev
    dladm show-link
    prtconf -D
    kstat [-P]
    Edited by: g777 on 2011-03-11 07:24

  • How to check space on asm and raw device?

    Hi All,
    I want to know how to check the space on asm device.
    we are using asm device which is on raw partition.
    Our archive gets full.I need to check the space on asm archve partiotion.
    how can i check the archive destination space?
    we are using raw device partition for crs and voting device.
    how can we check the space on raw device and how can we know which device is in use and which are not in use
    Thanks in advance

    4 - 5 raw partitions...
    What oracle version?
    Install OCR + VOTE in raw device better than OCFS2. if you use 10g to 11gR1.
    If use 11gR2,keep OCR + VOTE in ASM Disk Group.
    you can check which raw device OCR:
    $ ocrcheck
    VOTEDISK:
    $ crsctl query css votedisk
    On 10g if use raw device for OCR + votedisk: recommend 1 file = 250M
    11g recommend 1 file = 512M
    Good Luck

  • How do I know that Homesharing is working - without waiting for hours to check destination device?

    How do I know or can tell that Homesharing is working between iTune devices without having to wait some time to check the destination device?

    1. How does the client device know which Airport to connect to?
    The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
    2. How can I tell which of the Airports the attached client device is using?
    On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
    Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
    If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
    Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
    There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

  • How to check where my device is made?

    can someone tell me how to check wich provider made my device
    Solved!
    Go to Solution.

    ermanturko wrote:
    Hey i got a new device now, The torch 9860.. but its only touchscreen.. how can i look at my vendor code with this device?
    On the 9860, from the home screen, do this:
    Hold down the ESCAPE key (just right of track pad)
    Now, holding that down, Touch the upper left corner of the touchscreen, upper right, upper left, upper right.
    The Help Me! screen will popup.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How often do Mobile devices "Check in"

    Does anyone the answer to the following questions:
    1. How often do mobile devices enrolled in Intune (integrated into SCCM 2012) check in for new policy/apps?
    2. Does this vary by device type? (i.e. does iOS check in x many hours versus Android)
    3. Are there any other trigger points that force a mobile client to check in?
    Just trying to understand what the typical delivery time is for an Intune managed device to receive a newly deployed app or setting, and if there is anyway to force a client to check in (from the client itself).
    Thanks!

    Hi William,
    According to official documentation, the sync interval is 8 hours for all platforms:
    http://technet.microsoft.com/en-us/library/dn376523.aspx
    However, on the internet various blogs report:
    Windows Phone 8 by default connects every 8 hours. You can force/initiate the sync from the enrollment UI (settings -> workspace)
    Windows 8.1 connects every 24 hours. You can force by running "Run MDMAgent.exe" from an elevated Command Prompt.
    iOS by default connects every 24-36 hours. It is rumoured (didn't test it myself) you can force a policy/app sync by installing an app from the company portal app. You can later de-install the app if you want. By installing the app, the company portall
    app is forced to connect to Intune and will get new policies and apps at the same time.
    The WP8 sync force works for sure. i use this option all the time during Intune deployments.
    If you found this post helpful, please “Vote as Helpful”.
    If it answered your question, please “Mark as Answer”.
    Christian Gude | www.itexperience.net

  • Quick Question - how often does a device check-in to see if it needs an iOS update?

    simple question which i cant get an answer from Apple or the Normal discussion forums, so thought i woudl try the developer forums.
    how often does a device check-in to see if it needs an iOS update?
    and if its perodically (something like 7 days) would that explain why on two devices - one would show as the latest update being 7.0.4 and one shows 7.0.6?

    How ddid you ask Apple?
    This information is probably simply not disclosed.

  • May I know how to check whether my WWAN is HSDPA or EV-DO Verizon?

    Hi I just bought a new IBM Lenovo Thinkpad X61. The type is 7675-4KU.
    May I know how to check the WWAN is HSDPA or EV-DO Verizon?
    After I install the driver, how should I do to connect to internet using WWAN??
    Thank You.
    Solved!
    Go to Solution.

    All X61's have the SIM slot, whether they have a WWAN card or not.
    You would also see the WWAN card under Vista: right click Computer > Properties > Device Manager > Network adapters.
    If the Advanced button under ThinkVantage System Information is disabled, either something is wrong with your ThinkVantage Productivity Center setup, or you have a permissions problem.
    I doubt that you have a WWAN card. Your system does not have one by default. You would have had to ask for one to be added when you bought it.
    I don't work for Lenovo. I'm a crazy volunteer!

  • How to get USB device in the list of VISA resource Name field of VISA Open VI

    I have followed the below tutorial to communicate with my device using USB port. But i didn't get the name of the USB port in Measurement & Automation Explorer devices list. How to get it? Can anyone suggest something?
    http://zone.ni.com/devzone/cda/tut/p/id/4478
    Solved!
    Go to Solution.

    Hi kimhyun,
                     I have attempted this.But succeeded.I used pendrive as my USB device.my sugesstion is you don't disconnect your device at any point of your work.Check the device is connected properly.IF your system has recognized your device,you can view the device in control panel>>Device Manager>>Then open your particular device from the list of connected device then Details>>device description>>Hardware Ids>>Then you can find your vendor id there.
    Try this.I think your device is loosly connected.Which USB device are you using??Also you must install THE DRIVER OF YOUR USB DEVICE.
    GOOD LUCK
    Thanks as kudos only

  • How to check if my all speakers are working or not?

    Hey ,wanted to know how t ocheck my speakers are working or not properly.model DV 66121 tx ,with beats enabled.i think my 1 speaker is not working ,how to check ?thank you guys.

    I Bought an Iphone 5s On a shop How Will I Know If Its Fake or not
    THANKS
    <Personal Information Removed by Host>

  • How to check my Blackberry 9360 Wtty?

    I loss the receipt and my wtty card without shop chop... How to check my set wtty?

    most likely.
    If your phone is truly unlocked you will see a message in iTunes when you restore or update your firmware.
    Did you purchase your phone new?  Was it purchased unlocked from an Apple-authorized dealer?
    If you bought your phone off of ebay or another grey-market seller, chances are you have a locked phone.  In that case, only the carrier to which the phone is locked can initiate an unlock.  Some carriers allow this, others do not for any reason.

  • How to display the device name during file sending with Bluetooth

    I get this Message:
    File Receive Conformation
    Do you want to receive a file from 00:13:70:69:95:84?
    My Question is how can it display the device name not the device address?
    Message was edited by: hazzaa

    The same situation when I want to send photo from mobile phone to my notebook. I didnt find any option how to change it.
    When I send photo from notebook to the mobile phone the notebook name (device name) is displayed. Try to check external device properties. Maybe you will find there way to change it.

  • How to check does my notebook use integrated or AMD graphic card?

    How to check does my notebook use integrated or AMD graphic card? Some games show me that they use integrated card: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?
    This question was solved.
    View Solution.

    Hello,
    First click in Start Menu, Control Painel in the up right side click in Category and left in Small Icons.
    Search Device Manager.
    Display Adapters.
    Which is your Operation System ?
    Windows 7?
    If yes.
    Click with the right clickpad in the desktop and select Display.
    Screen Resolution you can see how graphic your used or change if you want to.
    Att Cristian
    If this answer help you click in Kudos to tanks.
    Tanks
    If this answer help you click in Kudos to tanks.
    If you don't have more question click in Accept as Solution to close this case.
    Best Regards Cristian Derick.
    Senior Support Analyst.

Maybe you are looking for