How to check if my battery is working perfect or not ?

cycle count is 124.please help
thanks

Since you know your charge count, you also know the other battery-related statistics. What's the problem? You should familiarize yourself with the online documentation that is available.

Similar Messages

HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
Will the data on my iPhone be preserved?
No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
copied from Apple - Support - Service Answer Center

How to check SQL Tuning Advisor task is exist or not

How to check SQL Tuning Advisor task is exist or not using DBMS_SQLTUNE,
I want to remove SQL Tuning Advisor task only if it is exist using DBMS_SQLTUNE.DROP_TUNING_TASK function

Two approaches.
1. Look up in DBA/USER_ADVISOR_TASKS, if it exists, drop it.
2. Drop it, ignore the exception
3. Drop it, catch the exception (specific exception if you want to rightly avoid such constructs as when others then null) obviously within an inner block is you want to catch and then move on to do other work.
SQL> declare
2   e_no_such_task exception;
3   pragma exception_init(e_no_such_task,-13605);
4   procedure forgetaboutit
5   as
6   begin
7      null;
8   end;
9 begin
10     begin
11       dbms_sqltune.drop_tuning_task('NON_EXISTENT_TASK');
12     exception
13          when e_no_such_task then
14               forgetaboutit;
15     end;
16     -- do something else
17     null;
18 end;
19 /
PL/SQL procedure successfully completed.
SQL> P.S. Ignore procedure forgetaboutit - just amusing myself...

How to check weather a material created is active or not

Dear Friends
1 How to check weather a material created is active or not.
2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
3 In case of material valuation is Standard (Price control), the costing is done on the basis of the Standard Price or actual cost of the raw material.
I will be thankful for your advice.
Sanjeev

1 How to check weather a material created is active or not.
There is a Blue "i" button for the Material, pls click that it will show you the current status..
2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
for PR you can see the check button( CtrlShiftF3) beside personal settings

How to check whether set up tables are filled or not

Hi Gurus,
How to check whehter set up tables are filled or not?
Cheers,
Reddy.

Hi Reddy.......
And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
1) First u hav to run init with data transfer(After filling the set up table)
2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
Check this.....
Re: question on LBWQ and RSA7
Regards,
Debjani.....

When I try to sign into my iMessage account, it pops up 'could not sign in. Please check your network connection and try again'. I've checked my connection and it works perfectly. What can I do?

When I try to sign into my iMessage account, it pops up 'could not sign in. Please check your network connection and try again'. I've checked my connection and it works perfectly. What can I do?

You could try going into settings then messages and seeing if you have it turned on. You will need to use your apple ID then, hope that helps.

How to check wheather the project is having 'AUC' or not.

Hi friends,
How to check wheather the project is having 'AUC' or not.
Regards,
Safiq.

Hi Basha ,
as per my knowledge , WBS will have AUC ,Settlement rules etc, so u need to check asset tables based on the WBS element .
regards
Prabhu

How to Check MRP/MPS ASCP planning manager running or not

Hi Team,
How to Check MRP/MPS ASCP planning manager running or not.
Could you please navigation for the same.
Regards
Jagadeesh

Hi Jagadeesh,
You can check whether the planning manager is running or not from the following navigation:
Material Planner (R) -> Setup -> Planning Manager
You can get more information on planning manager from the below note:
11.5 - Planning Manager Related Issues - A Complete Troubleshooting Guide (Doc ID 131051.1)
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

How to check if the GPS Antenna works?!?!?

Dear all,
I've a "small" problem.
As most of you have experienced I cannot fix the signal from the satellite.
I tried everything...45°, open sky (I tried even in open sea!!!) etc...
So my doubt is the following: how can I be sure that my antenna is working?
Do you know if a SW to verify it exists????
Do you know how to check it???
If yes, pleaseeeeee tell me!!
cheers
MArco

No - there's no software which can tell whether the GPS antenna is working or not. Within Maps v2 in the bottom right hand corner there is an indicator which will let you know once it has obtained a satellite lock - but not whether the actual hardware is working or not.
Having said that I have never come across any instances where the GPS antenna has not worked on a phone. What phone do you have ?
You should definitely have got a lock after 3 hours !
It is definitely worth checking your settings. Make sure you quit Maps before doing this.
Goto the menu, click Tools then Settings.
Then click General and choose Positioning.
Within here click Positioning methods.
Ensure the options below are ticked :
- Assisted GPS
- Integrated GPS
- Network based
However please be aware that for Assisted GPS and network based, your network operators will charge you for any data transmitted.
Then load Maps again and give it some time to get a lock.
Please let me know how you get on.
Regards,
Edward

How to check whether Output ES is working or not.

I am able to see Output ES in the services list of the admin console of my server. Please let me know how to check whether this is working or not.
Regards,
Shabeer

LiveCycle ES2 (and LiveCycle ES) ship with three undersold and unadvertised web applications that are VERY useful. Each is referred to as an Installation Verification Sample (or IVS) but they are great testing tools you can use during development and QA. There is
1) Assembler IVS,
2) Forms IVS, and
3) Output IVS
Output IVS looks like this...
The pattern for deploying and using all three IVSs is very similar as what I am about to describe for Output IVS. The following directions apply to the JBoss turnkey on Windows.
1) go to C:\Adobe\Adobe LiveCycle ES2\deploy and locate adobe-output-ivs-jboss.ear
2) copy adobe-output-ivs-jboss.ear to C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\deploy
3) if necessary, start LiveCycle
4) open a browser and go to http://localhost:8080/OutputIVS/
5) click Check/Change your preferences
6) add Admin Credentials
7) click Save
8) click Test your form designs
9) Select an .xdp from Form designs
10) Click Use EJB (or Use Web Service if you feel so inclined) to invoke LiveCycle Output ES2
Steve

How to check my RAC private interconnect working properly?

All,
Is there any way to check whether my RAC private interconnect is working properly or not?
Thanks,
Mahi

Mahi wrote:
All,
Is there any way to check whether my RAC private interconnect is working properly or not?
Thanks,
MahiCVU verifies the connectivity between all of the nodes in the cluster through those interfaces.
$cluvfy comp nodecon -n all -verbose
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm

How to check whether a user session is null or not

Hi
I am using Jdeveloper 11.1.2.2
I have a use case of running some Junit test case, this is the problem I have :
There are some Junit tests which are written for some VO's. While testing insert and update operation in Junit there is two mandatory columns Created by and Updated by to be entered for committing into the database.
These values are taken from the UserName of the current UserSession .
So for getting the these values for each user I thought of displaying a JPanel before the test is run, where the user enters the Username and password which is validated and the user is verified.
First, I need to check whether there is a session present or not. For checking this, I wrote a createUserSession() and did like this inside it :
if(fixture.getApplicationModule().getSession().getUserData().isEmpty())If so to show the Jpanel and get the user details and verify the user.
But while running the test itself I found that the session is already present, now I just have to input the values based on who is the user.
But Junit doesn't run the tests in the order in which the test are written. So I have to call this in all the test cases.
The Question is :
How can I check whether the session is already present or not, so that I don't have to ask the user every time while every test is running to enter the Username and Password ?
Thanks,
Nigel.
Edited by: Nigel Thomas on Jul 30, 2012 10:26 AM

Hi,
wondering why don't you create test users and then automatically log them in as Jan Vervecken did on the threads I pointed you to. This way your test cases run without user interaction. To test if a session exists for a user, I would put a custom property into user data. If this property exists, the user session is an existing one. However, make sure the information you save into the user data survives passivation as otherwise the information you get out of this is not accurate. See: http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/
Frank

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
    l_dpath = p_file+0(l_no).
Validate the directory of the application server
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
      EXPORTING
        dir_name               = l_dpath
      TABLES
        dir_list               = l_i_dlist
      EXCEPTIONS
        invalid_eps_subdir     = 1
        sapgparam_failed       = 2
        build_directory_failed = 3
        no_authorization       = 4
        read_directory_failed = 5
        too_many_read_errors   = 6
        empty_directory_list   = 7
        OTHERS                 = 8.
If any problem occurs with the directory then display proper
error message
    IF sy-subrc <> 0.
    Display error message
      MESSAGE e018 WITH 'Problem with directory entered'(008).
    ENDIF. " sy-subrc <> 0
Regards,
Joy.

How to check whether the report is being called or not

Iam using srw.run_report.for calling another report. I have registered both the report in oracle apps11.0.3. When i run the master report in oracle apps I want to see whether the second report is called or not. How to check this.
Thanks.

try to check it in C:\Reports6i\Bin
C:\Reports6i\Bin <-- this may varry depending on the location of your reports.
btw, are you generating a pdf file?

Howto check my backup TAPE will work properly or not.

Hi all,
I am taking every day offline backup to my production server.
now i want check my tape, in case of restore it will work properly or not.
Thanks & Regards,
Satish kumar-k

Hi,
A point to add.
The Oracle DBVERIFY tool is available for both types of verify, that is, backup tape readability (but without a byte-by-byte comparison) and database block consistency.
To perform a backup verification, start BRTOOLS or BRGUI and choose Backup
and database copy → Verification of database backup and Backup and database
copy → Verification of archivelog backup respectively. Select the backup to
be verified from the list and select the type of verification in the option Use
DBVERIFY (use_dbv):
no means that only tape verification will be performed.
yes means that tape verification is performed and database block
consistency is checked.
Hope this helps.
Pl award suitably.
Regards

How to check if my battery is working perfect or not ?

Similar Messages

Maybe you are looking for