How to check in IDCS4 the rgb images?

Apparently the Preflight panel does not consider this option and the links option (which shows this condition) is a calamity because you have to touch photo by photo and the vertical arrows to speed the process do not work at all...

Of course it's in the Preflight options!
[PS. What Ho? Why doesn't the image upload work anymore? It sez [The content type of this image is not allowed.] ... for a PNG?]

Similar Messages

  • How to check what is the full name of the installer is used?

    Hi,
    how to check what is the full name of the installer is used?
    Thanks,

    Very nice, but assuming you did deliberately fire the installer, don't you remember the command? Apart from that your question has (as usual) no version and no platform and no context. If you are still in the installer and using any variant of Unix you can very easily run 'ps' to see the exact command.
    You would have needed to provide platform and version information when submitting the SR. Can you explain why you have this forum guess at it?
    Sybrand Bakker
    Senior Oracle DBA

  • How to check what are the enhancement done for MIRO transaction

    Hi Experts,
    Please help me out, how to check what are the enhancement done for MIRO transaction.
    Thanks in advance.
    Thanks,
    Basanagouda

    Hi
    Use the BADI
    Please refer these documents: [Enhancements required in MIGO|Enhancements required in MIGO; and
    [Enhancement in MIGO for Goods Movement|Enhancement in MIGO for Goods Movement;
    Hope this helps!!
    Regards
    Vijay

  • Script to check resolution of the embedded images in illustrator

    Hi All,
    Is there is any script available to check the resolution of the embedded image in the illustrator.
    Regards,
    Vinoth

    Hi Kenny,
    I posted the following file to the NI outgoinng ftp site-- you'll have to grab it in the next few days before it gets automatically wiped off. 
    ftp.ni.com/outgoing/CompanyName.zip
    Look for the "Using ResultsList Menus.doc" file in the main "CompanyName" folder, it will have installation instructions and step by step how-to-use information.  Also feel free to email me with questions at [email protected]
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • After installing 3.6, Firefox's screen image is drasticallay rreduced, how do I get bact the screen image size that I had with previous Firefox?

    I installed Firefox 3.6 and when I restarted the program the display image size was approximately 2/3 the size of the image provided by the previous version of Firefox.I had to zoom-in 5 times before I could read the text. How can I recover the screen settings that I had with the previous version of Firefox or how can I set new defults for screen image size under Firefox 3.6?
    == This happened ==
    Every time Firefox opened
    == After installing Firefox 3.6

    Hello Michael.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
    Also, if you want to use an older version of Firefox, please use Firefox 3.5.11. Only versions 3.5.11 and 3.6.8 are supported, and both contain all the latest security fixes. Using any other version is unsafe and not recommended.

  • How do I copy only the flagged image in a stack to an album?

    Within a project containing many stacks, I want to make an album showing only flagged images from some of these stacks. But when I try to do this, I end up with the stacks in the new album - which is not what I want.
    For example, from a small gathering I have 94 photos in 24 stacks. (Among other things, I auto-bracket.) The correct image is the "pick" in each stack. I flagged 8 photos and uploaded them to a Picasa Web Album, for people to see. I want to make an album inside the project showing only the photos I uploaded, but I have not found how to do this.
    I can view the 8 flagged photos by filtering, and though each has a badge showing the number of photos in its stack, the remaining photos do not appear if I click on the badge or press Shift-K or select Open/Close Stack: all that happens is that the badge toggles between the number of images in the stack ("x") and "1 of x" - say, between "4" and "1 of 4", if there are 4 images in that stack.
    But when I put a flagged image into an album, I get its whole stack. It does not matter whether I drag it or choose New > Album and click the "Add selected items to new album."
    This seems like such an obvious task that I feel I must be missing something.
    Any help?

    Just to expand on Frank's answer: that's how Aperture works.  Stacks travel together.  You will see the same behavior regarding filtering in the Album that you see in the Project.  (Album is a container.  As with a Project, you can filter the Album container to show only items that meet your filter criteria, but the contents of the container don't change by being filtered.)
    This is why Album picks are so useful.  In Projects, the Stack Pick is the left-most Image in the Stack, and is the Image that shows when the Stack is minimized.  In Albums, you can specify an Album Pick.  (The default Pick is the Stack Pick.)  When a Stack in an Album is collapsed, the Album Pick is the Image that shows on top.
    Added the following paragraph:
    So you could have a Project with Stacks of bracketed exposures (an excellent use of Stacks), you could make the best of these the Pick, and then you could make an Album showing, say, the second best ones by putting them in an Album and designating the second-best Images as the Album Pick of each Stack.
    You should have no trouble creating an Album of your selected Images (in this case, you are selecting by "is flagged").  With Stacks collapsed, you should see what you seem to want, which is a group of the Images you selected to be in the Album.
    denke wrote:
    I want to make an album inside the project showing only the photos I uploaded, but I have not found how to do this.
    That the rest of the Images in the Stack are there shouldn't be a concern.  Why is it?
    Message was edited by: Kirby Krieger

  • How to check data in the cube

    for integration purpose, how can you go and check data in the cube and validate it against the query data ? i know we can go to corresponded infocube and right click "display data" but what's on the query is not available when i execute "display data"
    Thanks

    You can always use the similar set of Restrictions as used in RKF and get the value very close to what RKF is displaying.
    But getting the same values in CKF is a bit tough..I can suggest may be you can take few/1-2 examples and do the calculations manually and compare the query result and Infocube data.

  • How to Check and Uncheck the JCheckBox in the JTable?

    Dear Friends,
    I created a Table using JTable and it consists first column is JCheckBox (JCheckBox is included in JTable by using TableCellRenderer) and two more columns with Id and Name. How to enable the check and uncheck the JCheckBox in the Table and how to get the row id or values of the rows where the CheckBox is checked?
    Thanks in Advance.
    Sathish kumar D

    Read the API for JTable and follow the link to the tutorial on how to use tables, where you will find adequate guidance and examples.
    db
    edit And isn't this post on the same topic as your previous one? If so, please add a note that responses should be posted here and not on the other thread.
    [http://forums.sun.com/thread.jspa?threadID=5353422]
    Edited by: Darryl.Burke

  • Availability checking - How Avail check can see the Reservat linked to a SO

    Hii there,
    We have the following issue. When we create a Sales Order, we want to reserve the stock so that when another Sales Order for the same material is created, the standard Material Availability check will know the 1st SO has x amount of stock already reserved.
    We are running the standard BAPI - BAPI_MATERIAL_AVAILABILITY and using the Availabilty checking rule assinged in the Material Master and the Scope of check from Transaction OPJJ, but we are not able to force the Avail Check to acknowledge the Reservation created for the Sales Order.
    The standard Reservation check on the Scope of check is only for manually created Material Reservations but we are creating ours linked to a Sales Order (movement ype 231) and although you can see the Reservation in the RESB table, the Avail check does not take this reservation into consideration.
    Any ideas would be greatly appreciated.
    Thanks.
    Owen

    When we create a Sales Order, we want to reserve the stock
    1)  Go to material master and check what availability check is maintained.  Most probably, it should have been 02
    2)  Next go to OVZ9, select the combination 02 => A and execute.  There tick the box for "Include sales reqmts". and save
    3)  Now create a sale order and update the forum how it works
    thanks
    G. Lakshmipathi

  • How does Check Names in the Target Audience picker work?

    Can anyone tell me how the Check Names button in the Target Audience picker works? We are having problem with a specific audience in one of our web applications. I don’t think the problem is the actual audience though:
    The Target Audience is a global target audience named ”XYZ”. It is compiled and contains member. When an article is tagged with this audience all works fine as long as we use the Audience Picker dialog. But, when using the Check Name button the audience
    is not saved. This happens when I edit properties on the article (not customized UI) and also when I edit the article in a customized UI. No ULS messages.
    I have read that the Target Audience Picker searches for matches in AD Distribution groups, SharePoint groups and Global Audiences. When we write “XYZ” in the audience field and presses the Check Names button one suggestion is displayed, named “XYZ”. When
    I write “XYZ N” and press the Check Names button several suggestions are displayed: 4 “XYZ” and a couple of other suggestions “XYZ xx…” etc. We have no SharePoint groups starting with “XYZ”, we have no AD Distribution Groups starting with “XYZ”, and we have
    only one Global Audience starting with “XYZ”. Where are all the “XYZ” suggestions coming from? Can anyone help, please?
    We are using SharePoint 2010.
    Best regards Heidi Lillebuen

    Hi Heidi,
    The target audience picker is similar to people picker, it searches the content of User Profile Service to find the matching users or groups.
    I did a test based on your description. In my testing, everything worked well.
    Please check whether there are some users whose display names are like ‘XYZ ***’.
    Please create a new global audience using a different name, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How to open and validate the tif images via java?

    Is it possible to open and validating the photoshop images via java. Kindly advise me.
    Thanks for looking into this.
    Maria Prabudass

    I have recently looked at athe code for Image Processor.
    To avoid bailing on errors it uses two techniques.
    1) It turns off all PS error reporting in addition to just turning off dialogs with:     app.displayDialogs = DialogModes.NO;  (it restores the original settings when exiting)
    2) It uses the Javascript construct  Try.....Catch around the basic body of the code so "any" error will not abort the script but just jump to the "Catch" code.
    Hope that is useful

  • How Do I put in the same image for multiple songs on iTunes

    Hi,
    I know if I click on the song on "info", I am able to change the album image. Is there a way for me to select multiple songs and do a bulk change with the same image?
    Thanks.

    Yes.
    Select multiple songs, get info and paste the artwork.
    Or select multiple songs and drag the artwork to the artwork window at the lower left of iTunes.

  • ECM - How to check eligiblity of  the employees for a comp review item

    Hi
    We have one requirement in Compensation management,  While creating the Budget structures I need to determine the Eligible employee population (For amount calculation) depending on the Compensation Review Item selected on the selection of the Custom program. Compensation Review Item is in V_T71ADM09-CITEM. So with this condition how can I find all the Eligible Employees having the Comp Item selected.
    Thanks in advance,
    Shrinivas

    Hi,
    eligbility is maintained in IT0381 - Compensation Eligibility
    Wilfred.

  • How to check who locked the Tcode in SM01

    Hi to all experts,
    Is there a way to check who locked the Tcode in SM01 or in table TSTC?
    Thanks in advance.
    BR,
    Nancy

    Dear Nancy,
    Check the thread,
    [sm01 transaction logs;
    Regards,

  • How do I delete all the culled images at once?

    I'm importing masses of images and using the stack function to pick the best and nuke the worst of similar images. That part works fine.
    When I give an image a "0", Aperture puts them in the "Rejected" folder.
    How do I empty that folder in one step? What am I missing?

    nope. turning into list, selecting all, and deleting
    brings up the dialog, which always says "1"...
    Unstacking and then trying to delete the pile results
    in the same outcome. You can only delete one at a
    time. I thought I was missing something, but it
    appears that you can't empty out the reject pile. You
    delete things one at a time.
    I'd call this a bug or an oversight.
    I just went into the "Rejected" smart folder in my library, and was able to delete 23 versions (along with masters) at one time.
    Are you sure you don't have the "Primary Only" option set as another poster outlined? It makes Aperture behave exactly as you described - you select a few images, do some operation on them, and it only affects the primary selection in the group.
    To check, look down at the bottom middle control panel of buttons. Right to the left of the two rotation buttons is a button with a square on it - if this button is darker than the others next to it then you have "Primary Only" turned on.
    It's actually quite a nice feature, once you know that it's there and have it under your control instead of accidentally having it pressed. I was trying to rotate groups of images and kept wondering why it would not work until I ran across the previous posters tip about that.
    The hotkey is "S" if you prefer the keyboard...

Maybe you are looking for

  • Issue in registering ABAP stack into SLD

    Hi all The issue is as shown below. I appreciate your help. Environment: SLD host-Windows Server 2003, Oracle 10g, WAS JAVA 640 SP19 CRM ABAP+JAVA 640 host - unix, Oracle I was able to register CRM JAVA stack in SLD from Visual Administrator>SLD Data

  • Input file size limition in File Reader Adapter

    Hi, We have a File Read Activity(using File Reader Adapter) which works on a Polling model. Whenever a input file is found in a designated directory it invokes our BPEL web service. During load testing we found out that if input file size exceeds 7 M

  • Green screen effect?

    is there a way in lightroom to like erase the background. like selecting a certain color and replace it with another image? like a green screen effect? im asking for lightroom because the computers in the studio where i work uses that only from adobe

  • "unknown error" when I try to update my ipad

    I get an "unknown error" when I try to update my ipad... no problem signing on at the website from a desktop, but can't update any programs or purchase any new ones in the apple store.

  • Using OR in Contains

    hi .. Using contains i want to search for record containing any word from the given string.... i.e if i use select count(*) title from docs where contains(text,'first',1) > 0 i want the records containing first or document... Where should i place thi