How to check iPhone 2,3,4 with and without S factory unlock status

There are many discussion going around people concerned about how they can check that an iphone they got or purchased is FACTORY UNLOCKED here is what they need to do which I recently did
1. First of all you will be getting signals for any carrier sim you insert into iphone
2. To Confirm the FACTORY UNLOCK status you require following things
(a) Latest version of itune
(b) Latest version of ios download it to you laptop/pc desktop .
3. Connect you iPhone with itune using cable connection not wifi , Itune should stay open
4. press SHIFT button on your keyword for Windows and if you are on MAC you are going to hold option button then click Restore button and select the IPSW you have downloaded on your desktop and let restore process begain
5. Once this is done you will have iphone screen and strat completing the activation screen in most cases you will have carrier shown up on top before the activation process end
6, ocne done you will see on your Itune screen
just like attached image in post it means your iphone is factory unlock and now can be used anywhere
around the world.
7. Just keep in mind iPhone official support is available to those countries where iphone are officially being launch
Please comment if this post helps you thanks
Note: Above process are mostly used for new factory unlocked devices for rest you will get you carrier info on top
Thanks
Muddabir
THan

Please remove this AIX question from this Oracle forum, and repost it in an AIX specific forum, or use IBM's support site.
Please apologize for cluttering up this forum with non-Oracle questions.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

How to check iphone 4s is original factory unlocked

How to check iphone 4s is originaly factory unlocked

Purchase an unlocked phone from a legitimate source (i.e. Apple if they sell unlocked phones in your country or a carrier who sells unlocked phones. See this list: http://support.apple.com/kb/ht1937).
If you already have one, you should be able to call AppleCare and give them the serial number. They should be able to tell you if it's locked and who it's locked to.

How to check iphone 3gs is factory unlock

how to check iphone 3gs is factory unlock

Put a SIM from another carrier in it...
Where did you get it from? If you're in the U.S. There is no such thing as a factory unlocked iPhone 3Gs.

HT4061 How to check iPhone warranty

How to check iPhone 4 warranty?

Look here on the right of this page "More Like This" iPhone4 warranty
or goto https://discussions.apple.com/message/17288610#17288610

How to check the number of contacts with segment level 'food and beverage' in the segment builder?

How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.

How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Contact facebook to address the facebook issues.

How to check was the object bound or not without exception handling?

context.lookup("someName");throws NameNotFoundException in case object was not bound to someName.
How to check was the object bound or not without exception handling?

context.lookup("someName");throws NameNotFoundException in case object was not bound to someName.
How to check was the object bound or not without exception handling?

TS3406 I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

YOu will need to contact your cell phone provider to resolve those issue, those are carrier features.

HT1766 i have an unlocked iphone 3gs and need an upgrade how do i upgrade without losing my unlocked status?

I have an unlocked iphone 3gs how do i upgrade without losing my unlocked status without having to pay to unlock it again.

Updating and restoring does not lock, but if you have a jailbreak (not AppleSoftware) and you return to Apple Software then it will lock. After all Apple has to keep to the law. It is even possible, that the jailbreak software makes it impossible to install Apple Software again and your iPhone will be inoperable after you try the update.
So If you officially unlocked you are fine and if you had a jailbreak, there is nothing an Apple forum can do for you.

Bex Report with and without BIA . . Fails with a dump EXPORT_TOO_MUCH_DATA

Hi Folks,
We have a report thats has been running well in production for more about 18 months. This month it did not complete execution.
We did implement BIA couple of 4 months back and the run times have drastically reduced after the BIA. Now this query execution results in a Dump with and without BIA. FYI the underlying cube has 195,876,020 records only.
Name of Runtime error: EXPORT_TOO_MUCH_DATA
Short text: Too much data for export.
What happened? Runtime error
 The current ABAP program "CL_RSR_CACHE_DO_SPID==========CP" had to be
 terminated because one of the statements could not be executed at runtime.
Error analysis: The dataset stored under an EXPORT/IMPORT ID is restricted
by
1. The maximum possible size of 2 GB
2. The length of a data record and the capacity of the sequence counter. This error occurs only if the capacity of the
sequence counter does not go beyond 255.
Source Code Extract:
 1 METHOD if_rsr_cache_data_object~get_xstring.
 2
 3 FIELD-SYMBOLS:
 4 <l_xstring> TYPE xstring,
 5 <l_sp> TYPE ANY,
 6 <l_spinfo> TYPE ANY.
 7
 8 CREATE DATA r_r_xstring.
 9 ASSIGN r_r_xstring->* TO <l_xstring>.
 10 ASSIGN n_s_spid-r_sp->* TO <l_sp>.
 11 ASSIGN n_s_spid-r_spinfo->* TO <l_spinfo>.
 12
 13 *... Sp has to be the first component
>>>>> EXPORT sp = <l_sp> spinfo = <l_spinfo>
 15 TO DATA BUFFER <l_xstring> COMPRESSION ON.
 16
 17 ENDMETHOD.
Referred to the below note 0001232573
which says to have 'RSRCACHE_ITAB_COMPR' parameter using report SAP_RSADMIN_MAINTAIN
Note say the below (It might be a little tricky, to find an appropriate value for 'RSRCACHE_ITAB_COMPR' as it heavily depends on the query-specific data structures that are stored in the cache. The general recommendation would be to start with a value of about 5000. Test this with a query, that dumped previously. In case the dump persists reoccurs, reduce the value of the parameter significantly. Otherwise, if no dump occurs but you face noticeably longer runtimes, increase the parameter.)
We are trying not able to get to the right parameter value. (changed it from 5000, 4000, 3000, & 1000) without much help. Did any of you had to change this parameter. How low or High can this parameter be changed?
We would like to understand if changing any other parameters would help in RSADMIN table would help?
Any thoughts from the experts would be appreciated
Thanks,
FHF

Hi,
Are you running the report for all the selections(all the data )?
execute the report with data selection and check?
Is the data in the Ic - compressed?
Regards
KP

STO with and without delivery

Hi All,
sorry for troubling you all again. last question on STO.
1) when STO is required to be with delivery only then only we use IMG > step up stock transport order> Assign Document Type, One-Step Procedure, Underdelivery Tolerance
there is no need to assign document type in the step--> Assign Document Type, One-Step Procedure, Underdelivery Tolerance, if it is without delivery in step -- ? is it like this?
i created a document type zubd by copying the std UB. and did the setting in the STO with the help of SD consultant.
i assigned the new STO document type ZUBD in step
Assign Document Type, One-Step Procedure, Underdelivery Tolerance
now when i am trying to assign document type UB in the step;
Assign Document Type, One-Step Procedure, Underdelivery Tolerance
the system is giving me error message : an entry already exists with the same key
am i right if i make the interpetation for STO with and without delivery like this:
1) for STO without delivery there is no need to do IMG in the step Set up stock transport order. we can use the std doc type UB or the one created by copying UB.
2) for STO with delivery we have to do the settigs in IMG for set uo stcok transport order
thanks and regards
Kavita

Hi Kavita,
You are Right,
Assign Document Type, One-Step Procedure, under delivery Tolerance
In this step, you define which document type is to be used for a certain combination of supplying plant and receiving plant.
There is no need to maintain IMG setting forStock Tranfer Order Without SD delivery. because main moto of assignment of Document type is to specify which delivery type is to be used.
for this we allready maintain IMG setting before this srep >Assign Document Type, One-Step Procedure, Underdelivery Tolerance at
Assign Delivery Type and Checking Rule:
In this step, you specify whether an SD delivery is to be created in the case of a PO with a certain combination of supplying plant and document type. You can also specify which delivery type is to be used.
The delivery determines how a delivery is handled. I.e. stock transfers without a billing document or for stock transfers with a billing document.
Regards
Sanjay l

VA01: Creation of SD order with several material codes,with and without VAT

hi guys,
could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
We don't want a sales order with an combination with and without VAT.
Pls advise. Thanks.

could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
We don't want a sales order with an combination with and without VAT.
H i
1.The Vat ( Tax ) is applicable on basis of Customer and Mareial Tax classification.
2. So as far as material is concerned , group all VAT applicable material in One Division
Say in FMCG Company
Divisions are Soaps , Skin Care , Shampoo etc
Create Sub Divsions say for Eg Soaps-------Soaps 1( Taxable) & Soaps 2 .( Non Taxable ) and acordingly for other divisions
And then Create Sales Areas accordingly.
All this will need Reorganisation of your Sales Area
Regards
Rohit

HT1414 hello..i have purchaes iphone 5 from u.s it's a factory unlocked iphone 5 ..on may14th..it has warranty till may14th of 2014..and i came undia on july and after using the phone for imonth in india whaen i;m restoring th iphone 5 it doesn't restore

hello..i have purchaes iphone 5 from u.s it's a factory unlocked iphone 5 ..on may14th..it has warranty till may14th of 2014..and i came idia on july and after using the phone for 1moh in india ,when i'm trying to restore it doesn't shows apple iphone menu..it displays the screen image of connect usb cable to restore itunes .and i tried times and it shows the error (-1)..when i have contacted apple the said bring the phone to us we will replace it with new one....now i can't go to u.s so please kindly help me..as soon as possible...please

EDIT 2: It cannot be restored via iTunes 'cause I get a screen message saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a method for restoring it on the phone itself, without having to send the command through iTunes (connect the phone to computer, turn it off, hold both Home and Power buttons until the Apple logo disappears, release the Power button without releasing Home button, iTunes shows a message about an iPhone in restoring mode, restore, etc.). Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…
Please, help

Camera wont capture when Tethering Canon T5i in Lightroom 4.4. Tried with and without card.

I just unboxed a Canon T5i (700D). I've been shooting with a T2i for the past three years tethered to LR4 with no problem. Now with the T5i, i connect the camera, set up a new tether session and LR detects the camera in the pop up bar, but the sections for Shutter Speed, Aperture, and ISO are blank. The capture button is able to be clicked, but the camera does not respond. When the shutter on the camera is pressed, also no response. I have tried this with and without the SD card. I have used three usb cable and two different computers. I have checked for updates and my firmware is current. The camera is set to manual mode in the on position NOT the video position and I am tethering to a Windows 7 computer. Please help!

You will need LR5 for that camera to be supported for direct tethered capture. Or you can use the LR "Watched Folder" feature and use the EOS Utility or other tethering software packages. Here is a list of some options - http://www.tethertools.com/plugging-in/software/

How to check iPhone 2,3,4 with and without S factory unlock status

Similar Messages

Maybe you are looking for