How to check is my SATA Hard Drive in AHCI Mode?

Hey all. I'm trying to install Mac OS X (iPC distro), but it can't be done cause it always returns an error: Still missing root device. I've read that my Hard Disk must be set on AHCI mode, but I don't have an idea how to check is it set correctly or not. I didn't find the information about that in BIOS V2.4.
I'm using MSI K9N Neo v3 (MS-7369) -> NVIDIA Chipset
How I can find out that information?

That's illegal ==> https://forum-en.msi.com/index.php?topic=126115.0
Topic locked.

Similar Messages

How can i install a sata hard drive in my compaq nx6110

There is a rediculously small hard drive installe in my laptop 40gb. I want to install at least a 240 gb but only can find sata drives that size. How do I go about installing the sata drive.

You cannot install a SATA drive, and you can't go up to 240
because the BIOS is not "48 bit" compatible.
This limits you to 137 GB or less. There are plenty of 120 GB drives
on Ebay for pretty good prices; just search this phrase:
"2.5 PATA 120"
Good luck

HT5634 How to put windows 8 on MacBook Pro via sata hard drive USB off of other computer

Hi I have recently purchased a MacBook Pro 15 retina. My old laptop was windows 8 but the motherboard crashed and I have the sata hard drive that has all of my data info including OS would I be able to use the OS on Boot camp without purchasing a new license? Also how would I do that? I have put the hard drive into a portable USB device so I can access it via USB 3.0.

Others will give a better answer, but I suspect that Windows validation will consider this a "significant hardware change", meaning that it will stop working and/or you won't be able to update. Even so, it costs nothing to give it a try and see what happens.

How do i install sata hard drive?

ok, i am using right now my sony dvdrw on ide1 as master and ata hard drive on ide2 as master, booting to the hard drive. i am going to install an sata hard drive and use that as the boot drive, the normal ata as a storage drive only. how will i install the sata drive? do i install it to sata 1 and then durring the install of windows xp tell it to hit f6 for third party scsi drivers and then use the intel sata floppy driver disk that came with my board? it's the MSI-6728 board. or is there anything special i need to do in the bios or what?
oh yeah. what connection for power should i use? my powersupply has sata and normal, so should i use the sata power connector? and then what's this about legacy or something in the bios, or am i wrong?

Well first of all, you dont install the Intel S-ATA Driver Disc unless you are going to create a RAID Array....Go into the BIOS and on the "On-Chip IDE Configuration" Page Set the Options like this.........
On-Chip ATA Operate Mode : Legacy
ATA Configuration : P-ATA+S-ATA
Keep S-ATA Enabled : (Greyed Out Yes)
Keep P-ATA Enabled : (Greyed Out Yes)
P-ATA Channel Selection : Both
Combined Mode Operation (At first you have to set this to P-ATA Channel 1, then switch after you Move Windows to S-ATA)
Configure S-ATA As RAID : No
Then you are Going to have to Install the OS on The SATA and Just Move the Files that you want to save from the P-ATA HDD and then Remove the P-ATA Drive from the "Boot Device" List in the BIOS....
You really should List Your Full System Specs. When you POST...Create a "Signature" with your Forum User Control Panel...........Sean REILLY875

Seagate 300gig sata hard drive not recognized

I'm trying to install a seagate 300gb sata hard drive in my dual 2.0 g5.
I can plug in the two cables and the drive fits in fine, it even spins, however the computer does not recognize that the drive is there.
I've checked the sata in the system profile and tried disk utility but it is simply not there. Could this be a wiring problem or a bad drive? How do I check this?

My guess is that it is a Seagate 7200.9 with SSC on. If that is the case you will need a PC and this tool:
http://www.seagate.com/support/kb/disc/faq/ssc.html

How do I order a new hard drive 655-1402A or 661-6610?

How do I order a new hard drive 655-1402A or 661-6610?

For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody
http://eshop.macsales.com/installvideos/macbook_13_unibody/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the free application SuperDuper. It makes a bootable copy of everything on your hard drive http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0

Changing a ATA hard drive to a SATA hard drive

I have a TouchSmart tx2-1275dx and bought a SATA hard drive. Connector pins are same config, but different connector. Can a SATA be used in place of the old ATA..If so how to connect? Thanks!

An adapter for this does exist.
However I seriousely doubt that you could install it in your notebook whilst
the adapter is attached.
Aside from that I couldnt tell you that it would actually work.
I would suggest buying a PATA drive as it was designed for.
If you want to check on the adapter, I know that Frys sells them.
I have a store locally, you may also or check their Website.
GL

What's the best SATA Hard drive

I just found a Hitachi SATA 160GB from Zipzoomlfy for under $110. Has anyone tried this SATA hard drive? Is the operating temperature below forty?
How about Western Digital or Maxtor? Do they operate at low temps.
I have the older Hitachi 120GB and it operates above 40C (IDE). I also have a seagat 40GB (IDE) and it barely goes above 36C.

check this at newegg hitachi 80gig as you can see, this thing is fast, cool, and most importantly so cheap that you can afford to get 2 and RAID 0...
just read the reviews at the bottom
i will quote the best one:
Quote
I purchased two of these for my system and set them up in a RAID 0 arrangement. They are remarkably fast. Yes you can barely hear the seak sounds, but far quieter than my previous Maxtor IDE drive.
I have my striping setup as 32kbyte, and formatted the drives with 32kbyte cluster size. This gives me 92 MB/sec bandwidth using Sandra benchark test. The Sandra program comparison reports that the 37GB Raptors achieve 95MB. So, should you pay the extra amount for the Raptors to get another 3 MB/sec? I think not!!!

How do i use an external hard drive for all my itunes music?

how do i use an external hard drive for all my itunes music?

Hi valleydave,
Here are two good links for you to check out:
http://support.apple.com/kb/ht1751
http://support.apple.com/kb/ht1449
The first one goes over, in-depth, what you're looking for in regards to "off site" iTunes.

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

HT2426 how do i access my external hard drive connected to my time capsule 4th gen

how do i acess my external hard drive (wd) that is connected to my time capsule using a macbook pro?

Make sure that the drive has been formatted correctly to work with the Time Capsule.
That means a format of Mac OS Extended (Journaled)....highly recommended.....or FAT32.
Once this is checked, open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Disks tab at the top of the screen
If the USB port on the Time Capsule can supply enough power to the hard drive, you will see the name of the drive displayed in the window, per the example below:
If you have the correct format on the drive, and it does not appear, this is an indication that the USB port on the Time Capsule (which is under powered), does not have enough power to work with your hard drive.......even if the hard drive has its own power supply.
In this case, you will need to use a powered USB hub with the Time Capsule to provide enough current for the hard drive.
Now you should be able to access the drive using the Finder to mount it on the desktop.

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

I am replacing my existing SATA hard drive to a Solid State hard drive and want to image the drive, is this possible?

I am replacing my existing 320 GB SATA hard drive that clicks and makes weird noises to a Solid State hard drive and want to image the drive, is this possible? I then want to replace the DVD with a secondary large drive for storage.
So I am looking for any "gotchas" that I may be unaware of.
Thanks!

Put the Old drive in an external notebook drive enclosure. Install the SSD in your computer. Boot from your Old drive's Recovery HD:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Clone Lion/Mountain Lion using Restore Option of Disk Utility
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the New SSD. Source means the external Old hard drive.
Set the new Startup Disk to the SSD and restart the computer.
This process clones both your old OS X volume and the Recovery HD volume to the SSD. You can use a similar process to clone the SSD to the new hard drive you will install.

How do i copy all my hard drive files to an USB iBook?

How do i copy all my hard drive files to an USB iBook (with a progrgram (no drag-and-drop everything), so I can change out my hard drive, I have a MacBook Pro. Thanks.

Clone Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Select Disk Utility from the main menu then press the Continue button.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the Lion startup volume.

How can I use a firewire hard drive on a new Macbook with one USB-C only?

How can I use a firewire hard drive on a new MacBook with only one USB-C?

kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will. However, there is no such thing as a FireWire Hard Drive. There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure. If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

How to check is my SATA Hard Drive in AHCI Mode?

Similar Messages

Maybe you are looking for