How to check JDK for 64bit installation?
I just got a new XFIRE 2100 AMD64 and I have a bit of experience with JAVA I downloaded the latest 1.5 update and followed the Solaris 10 instructions, includding the 64bit instructions... But I'm not quite sure if my version of JAVA installed is 64bit or not.
How can I confirm this?
How can I confirm this?Check the system property sun.arch.data.model (should be 64)
Bye.
RG.
Similar Messages
-
Reg:How to check Vendor for particular Asset
HI
How to check Vendor for particular Asset?
regards
JK raoHi,
Good morning and greetings,
It would be very difficult to go into each and every asset and display the asset...instead create a quick viewer query using SQVI and use the table ANLA and the field name is LIFNR for Vendor Code and for Asset Number it is ANLN1.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
How to check performance for Stored procedure or Package.
Hi ,
Can any one please tell me , how to check performance for Stored procedure or Function or Package
Thanks&Regards,
Sanjeev.user13483989 wrote:
Hi ,
Can any one please tell me , how to check performance for Stored procedure or Function or Package
Thanks&Regards,
Sanjeev.Oracle has provided set of Tools to monitor the Performance.
Profilers being one of them; If you wish to understand more on PL/SQL Optimization, please read PL/SQL Optimization and Tuning.
See example of DBMS_PROFILER.
See example of PLSQL Hierarchial Profiler -
Hi
I have windows XP installed and I want to know what version of JDK is installed. Can anyone know how to check that?
Thanks,
VishalVishal,
File "ojdbc6.jar" is available for donwload from:
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_111060.html
Good Luck,
Avi. -
32bit rpms for 64bit installation - 11.2.0.3
Hi All
I am trying to install Oracle 11.2.0.3 (64bit) on Redhat linux 6(x86-64) . From the MYOS notes I see the following
Oracle Linux 6 and Red Hat Linux 6 notes from "Certification Information for Oracle Database on Linux x86-64 [ID 1304727.1]"
*+<Moderator edit - deleted MOS Doc content - pl do not post contents of MOS Docs>+*
Why is the 64bit installation still needs 32bit rpms? I could not find any articles related to this on myos.
thanks for your assistance.From this install document :
IMPORTANT:
Starting with Oracle Database 11g Release 2 (11.2.0.2), all 32-bit packages, except for gcc-32bit-4.3, listed in this section are no longer required for installing a database on Linux x86-64. Only the 64-bit packages are required. However, for any Oracle Database 11g release before 11.2.0.2, both the 32-bit and 64-bit packages listed in this section are required.
However, when you install the 32-bit client binaries on 64-bit ports, the installer checks for the existence of 32-bit packages. -
Installed ram, how to check it for faults?
I've ordered my first Mac, (27 inch iMac) and I've ordered some ram to install in the iMac when it arrives.
I was wondering, how do I check the installed ram for faults?
Is there a application etc with Mountain Lion that would allow me to do this?
Thanksshldr2thewheel wrote:
tal1971 wrote:
I was wondering, how do I check the installed ram for faults?
Is there a application etc with Mountain Lion that would allow me to do this?
the apple hardware test (AHT)
I've had a look at the link but couldnt see any mention if it checked ram for faults. Can you confirm that it does check ram for faults?
Thanks for the help, appreciate it. -
How to check owner for one interface in production system?
Hello All,
Please tell me the transaction were i can check owner for one interface in production system.
Client had created owner for one interface, so were can i check it.
Thanks and Regards,
ChinnaThanks for the reply,
i dont want to check the developer name in IR /ID.
in production system one interface is running and i got mail to check the generic user and role for that interface.
iam also bit confused on it
If u have any idea let me know.
Thanks and regards,
chinna -
Which used iPhone (even discontinued) and how to check it for safety
I am happy with my 4s.
In Italy you can have officially unlocked iPhones and Vodafone gives me 2 Sims with same number (master/slave).
Now I have the slave in an WM HTC which I use as second telefone going in places like beach, or in unsafe places.
Of course the WM is not so pleasant to be used and I am planning to buy a low cost old iPhone to replace it.
Asking your suggestion: I wish to use it with iCloud with iCloud Mail and another IMAP provider, sync with Mountain Lion iTunes for Adress - Notes - Mail - Calendar - iMessage. No interest in Music and video but Streming Photo could be interesting.
How low can I go back ? Will 3 be enought or should I need to stay on 4 level ?
I have read that some unofficial unlock could not be easy to detect and thic could give sync problems in future: since I will probably buy it on eBay or similar place, which will be the best test to check the phone aginst jailbreak ?
Thanks for any suggestion.
PS: I know ! the best will be to buy a 5 and use the 4s as second but... not so cheap !!WALTER-MILANO-ITALY wrote:
How low can I go back ? Will 3 be enought or should I need to stay on 4 level ?
You will need at least a 3GS to meet the needs you've already stated.
since I will probably buy it on eBay or similar place, which will be the best test to check the phone aginst jailbreak ?
The best test is don't buy it from ebay to begin with. Either buy one from someone you know personally and trust, or spend the money for a legitimate unlocked new phone. -
How to check condtions for multilines in switch step in bpm?
Hello,
I am implementing a scenario that send PO create Idoc(orders.orders05) to bpm and bpm receives an OrderResponse from File adapter, I have a switch to check the condition if the Qunatity for each line items from the OrderResponse xml matche with the quantity for each line ltems in OrderCreate, but I don't know how to specify mulitline containers in conditon editor, currently the system only takes the quantity from the first line item. Any suggestions or other recommendations? BTW, here is the blog talks about modeling multi rows for incoming message, didn't totally get it...
Using BPM (Blocks) when Incoming message has multilple rows
Thanks,
HyHi,
go to Condition Editor-->After selecting your message in the LeftOperand -->then it will lead into Expression Editor there you can see a check box stating "Multiline".
This will be enabled , if you choose option of XPATH in this Expression Editor.
Hope this helps,
Regards,
Moorthy -
How to check code for syntax errors
How do I check or validate my html code in dreamweaver. I wish to see if all the braces and tags are closed or not
please guide meHi There:
You can check to make sure the tags, parentheses (( )), braces ({ }), and square brackets ([ ]) in your page are balanced. Balanced means that every opening tag, parenthesis, brace, or bracket has a corresponding closing one, and vice versa.
Check for balanced tags
Open the document in Code view.
Place the insertion point in the nested code you want to check.
Select Edit > Select Parent Tag.
The enclosing matching tags (and their contents) are selected in your code. If you keep selecting Edit > Select Parent Tag, and your tags are balanced, eventually Dreamweaver will select the outermost html and /html tags.
Check for balanced parentheses, braces, or square brackets
Open the document in Code view.
Place the insertion point in the code you want to check.
Select Edit > Balance Braces.
All of the code between the enclosing parentheses, braces, or square brackets is selected. Choosing Edit > Balance Braces again selects all of the code inside the parentheses, braces, or square brackets that enclose the new selection.
And also make sure to validate your HTML code at - http://validator.w3.org/
Regards
Vinay -
How To Check Disk For Failures
It's more of a two part question.
1. Is there a way to check and see if either of my two internal SATA drives are failing?
2. How can I check and see if either disks have filesystem failures?
[root@ghost ~]# fdisk -l
Disk /dev/sdb: 250.1 GB, 250058268160 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488395055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005b294
Device Boot Start End Blocks Id System
/dev/sdb1 63 488395054 244197496 83 Linux
Disk /dev/sda: 250.1 GB, 250058268160 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488395055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00048e7c
Device Boot Start End Blocks Id System
/dev/sda1 63 8000369 4000153+ 82 Linux swap / Solaris
/dev/sda2 * 8000370 8385929 192780 83 Linux
/dev/sda3 8385930 488395054 240004562+ 83 Linux
One or both drives are becoming more noticeably noisy. Thanks for any info / help!Try gsmartcontrol, it's a graphical frontend to smartmontools, which in turn display the SMART status of your hard drives.
https://en.wikipedia.org/wiki/S.M.A.R.T.
Post the log here, if you can't understand the values. -
HT2404 how to free download for macbook installer
How to download Installer
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
How to check validation for a input field?
For example, I need to check the validation of a field, if OK, then the field will be inputted, otherwise, there will rise a message, how can I implement that?
Thanks and best regards,
AndersHi Andres,
U can write a code in Request Processing--DO_VALIDATE_INPUT
DATA: LR_BTADMINH TYPE REF TO CL_CRM_BOL_ENTITY.
LR_BTADMINH ?= ME->TYPED_CONTEXT->BTADMINH->COLLECTION_WRAPPER->GET_CURRENT( ).
LV_ZZAFLD000057 = LR_ENTITY->GET_PROPERTY_AS_STRING( 'ZZAFLD000057' ).
IF LV_ZZAFLD000057 IS INITIAL.
DATA: L7_MSG_SERVICE TYPE REF TO CL_BSP_WD_MESSAGE_SERVICE,
LVSP_MSG_V1 TYPE STRING VALUE 'Spare in Progress'.
L7_MSG_SERVICE = ME->VIEW_MANAGER->GET_MESSAGE_SERVICE( ).
L7_MSG_SERVICE->ADD_MESSAGE(
IV_MSG_TYPE = 'E'
IV_MSG_ID = 'ZBSP'
IV_MSG_NUMBER = '008'
IV_MSG_V1 = LVSP_MSG_V1 ).
ENDIF.
Regards,
Lokesh. -
How to check Bdoc for perticular transaction ...
Hey guys ..
I have following questions regarding Bdocs ..
1. How do we check Bdocs (in smw01) for perticular trasaction .eg : for Sales order # 8002345 .
2. Suppose my sales order has 5 items in it ,then how many Bdcos will be created for this transaction.Is there only one Bdoc for a transaction or each item has its own Bdco ?
Please guide ..
Thanks
SSHi SS,
Go to SMW01 -Expand '+' button -
In Queue name coloumn enter the sales order no with Astric as 8002345 and then execute.
Regards,
Satish Mathala -
How to check Windows for Acrobat Reader?
Hello, everyone. I hope you are having a nice weekend! :)
I'm trying to check to see if Windows XP PCs have Acrobat
Reader installed on a button that launches a PDF file. This is what
I have:
on mouseUp
set Acrobat = baFindApp( "pdf" )
if Acrobat = "" then
Alert "You will need to install Adobe Acrobat Reader to view
the PDF documents properly."
else
baOpenFile(the pathName&"Data/button1.pdf","")
end if
end
This launches the PDF on Windows if Acrobat is installed
without errors, but when I uninstall Reader and click on the
button, nothing happens. I don't get the alert and I don't get the
PDF launched.
This script actually gives me the alert on the Mac, but it's
moot.
Any ideas?
Thanks!It's not clear if you uninstalled Reader and then rebooted...
this might give a false positive... also, the notes for the docs
strongly suggest that baFindApp() looks for the registration of the
file extension which would be located in the registry...
... an interesting note: if Adobe Acrobat and Reader are both
installed, for instance, then the baFindApp() call will return
Acrobat.exe as the application (on my system, anyways) -
technically, Acrobat, Reader and GoLive have all registered .pdf on
my machine, but the registry lists entries alphabetically so
Acrobat gets the recognition, so-to-speak.
It would appear that baFindApp() has a flaw if two or more
applications have registered the same extension.
Maybe you are looking for
-
Need help in using mac installation disc
hi guys, my out of warranty macbook's hdd has died on me... so i went out to get a replacement 320GB sata drive, everything was working fine, and macbook detected the hdd, i am able to install my mac osx tiger using the recovery disc, but during the
-
Simulation in SAP CRM WITH THE HELP OF SAP BIW
How simulation can be executed in CRM with help of SEM / BI.
-
Message control - RV_MESSAGES_MAINTENANCE
Hi, I am using the Function module 'RV_MESSAGES_MAINTENANCE' to add the message control for Ztransaction. By passing the procedure value (Z00001), I am able to restrict the output types to assign for ZTransaction else the transaction accepting all
-
2 copies of photoshop since update
just updated Photoshop cc via the cloud and now there are 2 copies. Photoshop CC and Photoshop CC 2014. Why and how do I sort it. Was all ok until the update. Both copies appear in file manager and in the Creative cloud app under Apps Mavericks 10.9.
-
PSE10 Organizer to Flickr.
If I transfer photos from PSE10 Organizer to Flickr do the captions/descriptions also get transferred?