How to check legality of Photoshop CS3 DVD

Some years ago, I purchased PhotoShop CS3 for my Windows system. When I ditched my Windows hardware and switched to Mac, I retained Windows in Boot Camp for a time for backwards compatibility. I loaded Photoshop CS3 there.  When I no longer required any Windows capability, I deactivated the software and uninstalled it.
These days I use CS6 on the Mac.
I want to pass on the CS3 DVD to my 89 year old Dad but want to be sure that I have done everything to make this a legal transfer.
I have checked my registered products on Adobe.com and the software is not there.
Is the only way to be sure to have my Dad install it and see if it works?
Having worked for many years for a software company (SAS) I am greatly  protective of copyright.

John,
What I had in mind was upgrading from CS3 in steps:  CS3  to CS4 to CS5 to CS6.
John Waller wrote:
So the CS6 for Mac in this case must be a full version.
As per the above, not necessarily. 

Similar Messages

  • How to install adobe photoshop cs3 dvd

       How do I install Adobe Photoshop CS3 DVD to my computer  windows 7  I put the DVD in and nothing comes up to install it

    Hi mvigus,
    If the installer doesn't start automatically (you don't see the autoplay screen), navigate to the contents of your disc in Windows Explorer. Double-click the setup.exe file. Ensure that you are logged in as the administrator of your computer. Also, after the installation is complete, run the software with administrator permissions.
    Let me know if this helped.
    Thanks,
    Preran    

  • How do i buy adobe photoshop cs3 already installed on my computer? All it needs is activation. Thanks!

    how do i buy adobe photoshop cs3 already installed on my computer? All it needs is activation. Thanks!

    You would have to find some third party vendor and take your chances there.  Adobe does not sell older versions of their software.

  • How do I re-activate Photoshop CS3

    Today, May 21st, 2014, I received a prompt upon launching my Photoshop CS3 that made me a little wary.  I, so says the message, only have 5 days to re-activate my Photoshop before it kicks me off completely even though I have the serial ID, it has been PAID FOR. I put MONEY into this and time and effort. So, in 5 days, I won't be able to access my PS CS3.
    Here is a screenshot of it: http://i126.photobucket.com/albums/p83/black_pearl_photos/PS1_zpse935f0ac.png
    It says, in short, "After 5 days you will be unable to use the product if activation has not been successfully restored." And continues, "This product's activation is broken or invalid."
    On February, 24, 2014, I activated this software onto my computer (Windows 8) and it has worked flawlessly thus far. Why is it asking me to re-activate?
    So, I click "re-activate" like a good girl.
    Screenshot: http://i126.photobucket.com/albums/p83/black_pearl_photos/PS2_zpse6b25bff.png
    It perpetually loads for a good 10-15 minutes each time only to time out and give me a "no connection" error.
    Screenshot: http://i126.photobucket.com/albums/p83/black_pearl_photos/PS3_zps7a92ada6.png
    I am connected to very nice and stable internet and I never have an issue with it, so it can't be my internet.
    I went to customer service and spoke with some "Helper" who's name started with "Muc-" and I can't recall the rest. They gave me 3 simple steps.
    Step 1- Disconnect from the Internet (so when you launch PS, it will not connect)
    Step 2- Open Photoshop.
    Step 3- Click "never register"
    The only issue with this, when I tried it, is as you can see from the screenshot, there is no "never register" option and it just doesn't quite fit the description of my problem.So, after fiddling around with a few options, I went back to Customer Service and spoke with "Sanjay". He told me that Windows 8.1 does not work with CS3 even though, for me, for the last 3 months, it has been working flawlessly until this really wonky "re-activation" request.  He immediately pushed the Forums for user-based help, and wouldn't talk to me about anything. Kept shoving the Forums down my throat. And also told me to spend money by upgrading to creative-cloud. I'm not made of money here. There's a reason I am trying to stick with my CS3 because, I already paid for it. it's been paid for. I don't need to worry about subscription fees or extra bills. I have enough on my plate. So, finally, fed up, I go to the user base and just search for similar issues. I see users with similar issues, but no responses to help mediate the issue.  So, I go BACK to customer service.
    I am connected to "Rachana" and this "helper" starts off with the same, Serial ID, basic questions, so on and so forth. And then promptly tells me that The Customer Service System no longer supports CS3 customer service. If CS3 is still downloadable, somewhere on the Adobe.com website, should the support that goes along with it still continue considering people still use it? And pushed me BACK to the forums. So. There is my issue, my frustration, and all that good stuff.
    How. Can. I. Fix. This.
    -- Fire

    The CS2 activation servers are off-line permanently. See the page below:
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    Follow the instructions carefuly to download the new software file(s) from that page. Use the activation code from that page, not your old key, to activate the software.
    --OB

  • How do i uninstall/remove photoshop cs3

    what is the best way to remove photoshop cs3? how do i uninstall a program?
    dragging it to trash doesnt remove everything. help!

    You should be able to open the Finder, go to Utilities, then go to Adobe Installers. There is an uninstaller in there. It is supposed to uninstall everything. In theory. Adobe actually cautions against trashing the application folders now, according to their readme file.

  • How to read/open Adobe Photoshop CS3 Prefs.psp

    In which Programming language Adobe Photoshop CS3 Prefs.psp are written?
    Extend Toolscript wont open and in text edit is just cryptic hireoglyphs.
    Thans in advance!

    I for one have a totally legitimate reason for editing a PSP file. We have deployed CS3 to thousands of nodes across our campus, and the behavior of the scratch disk just made my jaw drop in horror (not to mention the sporadic way the PSP file is created and modified). NONE of our users (except admins) have access to the root of the C:\, yet it will only write to the root of a partition! I have found that the setting is stored in a PSP file, and I am in the middle of writing a 50+ (and growing) line VBScript to essentially create an X:\ to point to C:\temp and change the setting in the PSP file. However, I cannot figure out how this file works. The setting that points the scratch disk to C:\ does not exist in the file unless I have had PS open for a period of time.
    Adobe's biggest customers are institutions like ours and I cannot believe this issue went over Adobe's head in testing and QA.
    I did however, get a kick out of the dozens of instances of the string "loob".

  • How to check if  cs6 photoshop is activated if I cant access ps help?

    How can I check if my CS6 Photoshop is activated if I cant access PS Help?

    Why do you need to check it if you can't access it?  If it is because you need to have it deactivated then contact Adobe Support thru chat and ask them to reset your activations.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How to aquire legal music for a dvd resale project

    I want to sell my project dvd with music from itune on it. How do i go about get the release to have the music legallaly on there with no copyright issues down the road. Thanks in advance.
    Brent Mitchell

    There are two ways in the commercial end.
    The one I use is http://www.royaltyfreemusic.com/ whereby I pay for the CD (30$-$100) and I am permitted to use them in any DVD production without added fees. I believe with Freeplay you can download the music for near nothing but must pay a fee for every 50 copies you produce.
    Hope it helps.

  • How do I transfer photoshop cs3 from my mac powerbook to my macbook air?

    How do I transfer my photoshop cs3 from my mac powerbook to my macbook air?

    Download the Trial version to the MacBook Air from
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Follow the Very Important Instructions on that page first otherwise the links won't work.
    Then launch the Trial and enter your CS3 serial number and you're done.
    That'll use up your second (of 2) activation. If you want to remove Photoshop CS3 from the Powerbook then open Photoshop Help > Deactivate then uninstall to free up an activation.

  • How do you select special media tray from Adobe Photoshop CS3 on the Mac?

    I can select the special media tray (HP Photosmart Pro 9180) from Word for Mac and Illustrator CS3 for the Mac, but I don't know how to select it from Photoshop CS3 for the Mac.

    rebel1568,
    All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC.  You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
    CS3 is totally out of the upgrade or cross-grade loop.  You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
    Curt Y is correct in that CS2 will not run on current Mac-Intel machines.  You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
    Of course, you could run your Windows  on your Mac if you installed and ran BootCamp or Parallells.

  • How to check how fast my DVD is burning.

    I know how to change my settings for burning CDs but I need to know how to check at what setting my DVDs are being burned. I just purchased some archival DVDs and the manufacturer recommends to not burn them any faster than 8X.
    Please help!

    I know how to change my settings for burning CDs but
    I need to know how to check at what setting my DVDs
    are being burned. I just purchased some archival DVDs
    and the manufacturer recommends to not burn them any
    faster than 8X.
    And I don't recommend burning DVDs at greater than 4x - with 2x being prefered.
    iDVD doesn't allow you to adjust the burn speed. What you must do (and is a good idea for MANY reasons) is create a disk image out of iDVD - it's an option under FILE. Verify the disk image is correct with Apple's DVD Player application and the use Apple's Disk Utility (it's in your Applications>Utilities folder) to burn the disk image to writable media. Disk Utility give you some burn speed options. See Burning a disk image file on a CD or DVD in Mac OS X at http://docs.info.apple.com/article.html?artnum=93006

  • How can I uninstall my Photoshop CS 3 from my Mac, without an uninstaller?

    How can I uninstall my Photoshop CS3 from my Mac OS Extended (Journaled)?   It has never opened, since I increased the Mac's capacity to 2 TB.  Now I want to throw the Photoshop CS3 away and get a brand new Photoshop CS5.    There does not seem to be an uninstaller anywhere to be found.  Adobe spent an hour and a half on the phone with me and could not find a work-around.   We tried to reinstall the CS3 from the disk, but the installations failed. 
    An earlier Photoshop CS2 is also on the computer and needs to be uninstalled. 
    Is there a way to rescue my computer and put the new Photoshop on it?

    You need to manually delete the caps.db (somewehre in the Library:Application Support:Adobe folder) and then you can trash the program folders. Without an existing caps.db, a new one wil lbe created from scratch and al linstalls should run as if there never was anything on the system just as conversely you should not have trouble simply deleting the old versions...
    Mylenium

  • Getting a "Setup Error" when I try to re-install Photoshop CS3

    I've had a nightmare week.  My iMac crapped out and I lost the harddrive.  Now I'm slogging through the process of re-installing all my software.
    Per the instructions of the Adobe Customer Service, I went into "My Adobe" > "My Orders" and downloaded the Photoshop CS3 I purchased in Sept. 2007.  (I know it's old but it serves the purpose I need).
    But when I double click the "Setup" application, I get the following message:
    Setup Error
    Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance.
    When I contacted Customer Support, they told me they could not help me because they do not offer support for old versions of CS and to post a question here, so that's what I'm doing.
    Does anyone know what the "Setup Error" is and how I can re-install Photoshop CS3?

    Is IE your default browser?
    The address in that error is somewhat peculiar, in that it points to a process running on your computer (127.0.0.1 is a loopback address that points to your own system).
    I suggest that after downloading and saving the Flash installer to a folder, you completely exit Firefox, and do the installation with Firefox closed in case having Firefox open is interfering in some manner.
    Of course, make sure you get the official installer from Adobe, and '''uncheck the box for any tag-along software that you do not want''':
    http://get.adobe.com/flashplayer/

  • Photoshop CS3 Interface

    Hi everyone.
    when im useing adobe photoshop cs3 on mac and when i open image to work on i will still be able to see my mac desktop with the icons.
    my quiestion is how would I make my photoshop cs3 to block this and make it gray background, like when you open it in windows XP you will have only gray background then you open your image.
    please need help with this if any one know...
    all the best

    This has been standard Mac-behaviour for a long time; Application Frame was introduced in Photoshop CS4, so with CS3 you could work in Full Screen Mode (probably not what you are looking for) or use some additional software to achieve the appearance you are looking for.
    Someone else must have mentioned Desktop Curtain once, because I have the link but I have not tested it:
    http://download.cnet.com/Desktop-Curtain/3000-2094_4-65672.html?tag=vtredir

  • How to install Camera RAW update for Photoshop CS3?

    I know this is an ancient version! But for now it's all I need. Anyway...
    My Adobe Updater says "No Internet connection.  Please check your Internet settings and/or firewall.  Waiting for connection..." That's the first problem.  I figured out how to manually update Photoshop and Bridge, but Adobe Updater still shows this message when trying to check for updates.  Also, I've tried to update Camera Raw from 4.0 to 4.6 and I can't figure out how to manually install it.  I knkow the website says to do the following:
    Mac:
    Exit Photoshop CS3 and Adobe Bridge.
    Open the Finder.
    Navigate to the root of the local disk (not the user’s home folder).
    Navigate to Library/Application Support/Adobe/Plug-Ins/CS3/File Formats.
    Move the existing plug-in to another location (for example, a new folder on your desktop). Ensureyou keep this version in case you need to revert back.
    Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4.
    Launch Photoshop CS3 or Adobe Bridge.
    I manually entered "Library/Application Support/Adobe/Plug-Ins/CS3/File Formats" and it says this folder doesn't exist.  Can anyone help me update my camera raw?!
    Thank you so much!

    Adobe - Photoshop : For Macintosh
    Version CS3
    Camera Raw 4.6 update
    8.4MB
    10/10/2008
    Download Adobe - Photoshop : For Macintosh : Camera Raw 4.6 update : Thank You
    Mac:
    1. Exit Photoshop CS3 and Adobe Bridge.
    2. Open the Finder.
    3. Navigate to the root of the local disk (not the user’s home folder).
    4. Navigate to Library/Application Support/Adobe/Plug-Ins/CS3/File Formats.
    5. Move the existing plug-in to another location (for example, a new folder on your desktop). Ensure
    you keep this version in case you need to revert back.
    6. Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4.
    7. Launch Photoshop CS3 or Adobe Bridge.

Maybe you are looking for

  • How do I transfers books from ADE to Sony Reader Library?

    Got new Sony e reader and want to transfer books from my Adobe Digital Editions library and cant get my Adobe Library to recognize my Sony Reader.   Have been live chatting with Adobe and Sony to no avail all day yesterday.   Hope someone out there c

  • Can't preview or save pdf files with Firefox 5

    Ever since I updated to Firefox 5, I've been unable to preview/save pdf documents in websites. One example is the Citibank website. Is there any plug-in you would recommend? I would prefer if it's a freeware. Thanks.

  • "Find" required in MIR7.

    Hi, We use MIR7 for LIV. As our scheduling agreements have about 1000 line items, using "Purchase order/scheduling agreement" option becomes difficult. Hence, we use "delivery note" option when creating MIR7. Some delivery notes like "100" may be com

  • Changing font in SQL*PLUS

    I need to change Font of SQL*PLUS 3.3 to courier new and font size 8.. do you have any idea how can I achive this.. I tried changing registry also but it doesnot work. I am using Windows 95 machine. My database is Oracle 8i. Please help me if you kno

  • Why do i have to keep restoring my ipod touch every 10minutes?...HELP ME!!!

    Everytime i plug in my ipod to my Windowes Vista the itunes program opens right? Then a window pops up and says "your ipod has been detected as in restore mode" so i restore it.....10minutes pass....ipod compleatlly shuts down, restarted and all i se