How to check list of scheduled Backups at UNIX level

Hi Experts,
Am posting this question coz am unable to read data from DB13
So Can i view this info from OS level???
Now the conf files are stored at this location
/appl/sap/etc
But no use.
Help appreciated

We are using Tivoli storage manager
Data Protection for mySAP(R)
             Interface between BR*Tools and Tivoli Storage Manager
             - Version 5, Release 3, Modification 3.0 for AIX LF 64-bit -
                   Build: 294 compiled on Jul 19 2006
        (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
BKI2027I: Using TSM-API version 5.3.4.12 (compiled with 5.3.0.0).
BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
BKI0005I: Start of program at: Mon Mar 16 18:15:17 NFT 2009 .

Similar Messages

How to check the all scheduled concurrent programs.

Hi All,
APPS : 11.5.10.2
DB:9.2.0.8
how to check the all scheduled concurrent programs at a time, is their any script for this?
Thanks a million in advance.

Hi,
Please refer to the following threads.
How to know The request is scheduled or not??
How to know The request is scheduled or not??
Need Report or Query to see all scheduled jobs
Need Report or Query to see all scheduled jobs
Regards,
Hussein

How to check the number of contacts with segment level 'food and beverage' in the segment builder?

How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.

How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.

How to check listed time we charge our battery on macbook air

how to check battery cycle

Under the "Apple" click on "About this Mac: - "More info…" - "System report" - Under "Hardware" click on "Power" and at the top will be your "Battery Information".

How to check if my SuperDuper backup works?

After reading that not all external HDDs guarantee the necessary compatibility with SL in case of total system recovery from an external backup, I would like to test mine. Is there a procedure around that explains how to do this check without putting the actual installation at risk?
Thanks in advance

I rarely restore from SD, but I do boot from it, and run disk repairs from there.
I've been using SD a lot yesterday and now today, before during and after an OS update. Works great.
Some people have had trouble with USB case; or where the partition table wasn't set to GUID when the drive was formatted; and, Ignore Ownership sometimes is still selected on an external (always good to check, and once clone is made first time, insure by running repair permissions; I'd also run Repair Disk with DU and Disk Warrior).
As for testing restore, well, restore to a spare test drive if possible, harder to do if you only have one good port (and USB2 is way too slow, USB3 will be a huge performance boost). FW400/800 for now is preferable for a full restore.
Once you make SD backup, then smart updates should only take 15 minutes or so; and a great alternative addition to your TimeMachine. Having a bootable backup is handy and only really needs to be done 'as needed' like before an update, and when the system is in good working order (never update when you are having trouble).
I keep a small 30GB (could be less) Apple-only system on a partition on same drive as TimeMachine (1.5TB so room to slice out 30GB) so I can also boot from the drive. And 1.5TB has hit the magic $99. Room for a clone volume and another partition for T/M.

How to check list of transactions used for a certain period of time

Hi
Is there a way to check the transcations that were used e.g the past two months apart from using transaction STAT or sm19 or sm20.
Thanks

Hi.. i have got a similar request like yours.... i need to find the list of
list of transactions used by all users in a user group (in my case PLKR) in the past two months.
is this possible to find???

How to check list of users from OS level with type and validity AIX+DB2

Hi,
We have 40 clients in our ECC -PRD system. we do not have authorizations to login all clients , only we have 000 accessonly.
we need to check all users type and validity in the system. can any one please help me this script.
regards,
balarami

Hello,
Yes you can check the user validity and tye from OS level with DB script.
ORACLE SQL scripts : I assume that schema for your system as sapr3.
First you check the table fields by desc sapr3.usr02;
then can select these fields for user as select <field name1>, <field name2> from sapr3.user02 where uname=<required user name> and mandt=<client>;
check exact details before you execute script @ ORA level*
If you want to see logged on users - you can see them with your '000' ID for all 40 clients.
Hope this helps.
Thanks,
Amit Thombare

How to check OS trace file

Hi,
How to check server performance trace file in Unix level what is directory structure and file name ? also please what is Tcode for that in SAP level....
Thanks

Hi
You can see the OS log in ST06 / Details / Message Alert or something like this, I don't remember exactly, and unfortunately I don´t have a SAP system to see.
Hope this help you

Database Check list

Hi Folks,
What are the database check list to be maintained when a database goes live? (11gR2)
Check list like
Auditing
Backup policy
cron tabs
dbms_jobs
Please add the list and share your experience.
Thanks
KSG
Edited by: KSG on Jun 26, 2011 12:15 AM

Oracle is Oracle and the version has little bearing on what activities a DBA should be performing.
If licensed for the EM Diagnoistic and/or Performance Packs the DBA should take a baseline and compare the current AWR report to the baseline on a regular basis where regular could be daily to quarterly depending on how stable the system is and if performance problems have been identified, changes made, etc.... If not licensed then statspack can be used to perform the same function.
The DBA Administration manual has a page of DBA activities listed in it that is worth a look.
A lot depends on how what kind and how many applications your environment supports, the user load, and how well the applications make use of available resources. If your applicaitons have issues the DBA is likely to be busy verifying the issues are in the application and not in the database. Once identified then the DBA may be busy tuning SQL but in some shops that is the developer responsibility. So it all depends.
HTH -- Mark D Powell --

Check list field values using LINQ

I have to check if the CURRENT USER is already in the list USERS by comparing his AccountName to the list field ACCOUNTNAME.
If the USER is on the list I have to check if the field IsFollower is YES or NO and change it according to some conditions.
I think LINQ would be the correct way of doing this but I have no clue how to do that.
Any ideas pls, thanks

Hi,
Yes, you can query the list using LINQ.
You need to get the SPList Object firstly, and then you can query list item value using LINQ.
More information about how to check list field value using LINQ:
http://msdn.microsoft.com/en-us/library/office/ee538250(v=office.14).aspx
http://www.wolfsys.net/query-sharepoint-lists-with-linq/
http://geekswithblogs.net/TanviBlog/archive/2013/06/06/linq-in-sharepoint-and-querying-list-items.aspx
More information about how to use Server Object Model in SharePoint lists:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splist.aspx
http://msdn.microsoft.com/en-us/library/office/ms456030(v=office.14).aspx
Best regards

List of features of new Patch level

Hello experts,
Can you advise how to find list of features of new patch level, would be great if someone shares the link.
Attached is one such sample. I am looking for features of PL 5 and 6 of 9.1
Thanks
Deepak

Hi both,
besides these info files or the corresponding overview notes which comes with every patch delivery, I just can recommend to check the Top Fixes document, highlighting the most important corrections which are being delivered in patches:
SAP Business One 9.1 Top Fixes on SAP PartnerEdge; SAP Business One 9.1 on Customer Portal
SAP Business One 9.0 Top Fixes on SAP PartnerEdge; SAP Business One 9.0 on Customer Portal
SAP Business One 8.82 Top Fixes on SAP PartnerEdge; SAP Business One 8.82 on Customer Portal
hope this helps,
Peter

How to check for archivelog backup on a particular date or time?

Dear All,
We have RMAN full database, cumulative and archivelog backup(eg location: Diskgroup A) scheduled on a regular period basis. Assume archivelog location is Diskgroup B. The diskgroup B became full and unable to archive further, since no space. Unable to connect to database, connect internal only until freed error. alert log also shows that archiver error. So the solution for this to clear some space in diskgroup B by removing some old archive logs. In our environment, everyday the archive logs are stored in a separated folder arranged in date wise. I can do that . But before clearing some space, i need to make sure that the folder( or any date folder what im going to delete) is backed up or not. How to check that? Any idea please?
eg: i have archivelogs like this in folders
01_11_2013/
02_11_2013/
03_11_2013/
04_11_2013/
05_11_2013/
06_11_2013/
If i want to remove the folder 01_11_2013/( and its contents ie archivelogs) , how to check whether the archivelogs in this folder 01_11_2013/ is backed up or not?
Regards,

Pradeepcmst wrote:
Dear All,
We have RMAN full database, cumulative and archivelog backup(eg location: Diskgroup A) scheduled on a regular period basis. Assume archivelog location is Diskgroup B. The diskgroup B became full and unable to archive further, since no space. Unable to connect to database, connect internal only until freed error. alert log also shows that archiver error. So the solution for this to clear some space in diskgroup B by removing some old archive logs. In our environment, everyday the archive logs are stored in a separated folder arranged in date wise. I can do that . But before clearing some space, i need to make sure that the folder( or any date folder what im going to delete) is backed up or not. How to check that? Any idea please?
eg: i have archivelogs like this in folders
01_11_2013/
02_11_2013/
03_11_2013/
04_11_2013/
05_11_2013/
06_11_2013/
If i want to remove the folder 01_11_2013/( and its contents ie archivelogs) , how to check whether the archivelogs in this folder 01_11_2013/ is backed up or not?
Regards,
rman> list backup;
Which begs the question .. why is the FRA getting filled in the first place? Is it seriously undersized? Are you not doing regular housekeeping with rman 'delete obsolete' and 'backup archivelog delete input'

How to check the information in a backup device?

for example, if I have a disk dump device, then I use this device for backup, maybe full backup, maybe log backup, maybe incremental backup or even backup different database to this dump device.
Then I can I extract the information about how many different type of backup in this device? any command can list the all backup info?

Disk dump devices are typically useful for dumps to a tape drive, ie, the tape drive address rarely (if ever) changes ... so an operator just has to switch out tapes on a regular basis while the regularly scheduled jobs dump to the same device every time.
For filesystem-based dumps you're better off skipping the use of dump devices and just generate a dump file name on the fly.
Keep in mind that you do NOT have to dump to a dump device. You can dump straight to a file ...
===========================
dump database mydb to "/dump_dir/MYDS.mydb.20140321.211537.dbdump"
===========================
... and you can even go so far as to build the dump command 'on the fly' with T-SQL, eg:
===========================
declare @dumpcmd varchar(500), @dbname varchar(30)
select @dbname = db_name()
select @dumpcmd = 'dump database '+@dbname+' to "/dump_dir/'+@@servername+'.'+@dbname+'.'+
convert(varchar,getdate(),112)+'.'+
str_replace(convert(varchar,getdate(),108),':',null)+'.dbdump"'
exec(@dumpcmd)
===========================
NOTE: I'm not sitting at an ASE at the moment so you'll need to doublecheck the syntax of the above T-SQL.

How to check RMAN backup report or log

Hi Guys,
I have RMAN schduled to backup my database daily.
Please what are the steps to check the report of the backup to see what was actually backed up and if it backup up ok
Thanks

Use "LIST BACKUP" to display information about backup sets, proxy copies, and image copies. With LIST command you can list the following:
- Backups and copies that do not have the status AVAILABLE in the RMAN repository
- Backups and copies of datafiles that are available and can possibly be used in a restore operation
- Specified archived logs, backup sets, backup pieces, control file copies, datafile copies, and proxy copies
- Backups and copies restricted by tag, completion time, recoverability, or device
- Incarnations of a specified database or of all databases known to the repository
- Stored scripts in the recovery catalog
Examples on how to use LIST command are listed below:
RMAN> LIST BACKUP;
RMAN> LIST EXPIRED BACKUP;
RMAN> LIST BACKUP OF DATABASE;
RMAN> LIST BACKUP SUMMARY;
RMAN> LIST BACKUP BY FILE;
RMAN> LIST ARCHIVELOG ALL;
RMAN> LIST COPY OF DATABASE ARCHIVELOG ALL;
RMAN> LIST COPY OF DATAFILE 1, 2, 3;
RMAN> LIST BACKUP OF ARCHIVELOG FROM SEQUENCE 1437;
RMAN> LIST BACKUPSET OF DATAFILE 1;You can use the VALIDATE keyword of the BACKUP command to do the following:
- Check datafiles for physical and logical corruption
- Confirm that all database files exist and are in the correct locations
For example, you can validate that all database files and archived redo logs can be backed up by running a command as follows:
RMAN> BACKUP VALIDATE DATABASE ARCHIVELOG ALL;I suggest you read Oracle® Database Backup and Recovery Manuals:
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to take list backup with lookup columns data in sharepoint 2010

Hi friends,
I have one issue on "Copy the list in one sitecollection to another sitecollection"
I have one list like "ABC" and with lookup column "Status" this column is looked to anthor list columns
My task is i want to Copy the same list with lookup columns with Data(lookup columns Data) in one site and restored in another site.
Error is Lookup columns Data is not coming.
How to Copied list with lookup columns data to restored in another list?
Badri

i think there is no such method to move the list with lookup column.
couple of things which cause the failure, Number Source list may be not available on the target site collection, Column IDs / List IDs different from Site collection a to B.
I would try to use the backup of site collection and restore it, i am not sure whether it will work not.
i think copy the data from the lookup clomn in the excel, then move the list to different site collection with blank data then copy the data from excel to new list.
check this one for another idea:
http://blog.johnsworkshop.net/moving-lists-with-lookup-columns-inside-your-site-collection/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to check list of scheduled Backups at UNIX level

Similar Messages

Maybe you are looking for