How to check maximum number of connection ?

Hi Guru's,
How to check maximum number of connections for sender/receiver interface and for RFC's?
regards
Vinay

Hello Vinay,
I am not sure if your answer is as simple and straight forward as i think it is. Please see my Reply as below and let me know if you need any further details:
1. How to check connections for RFC in sap pi: Goto the RFC Communication Channel that you are using and there is an option that says "Maximum Connections" that will tell you the max connections allowed .
2. Max connection to service interface: I did not get which exact component or object you are asking about (in context to PI) ?
Regards,
Tarik Parkar

Similar Messages

How to check the number of connections to MySQL DB

Hi,
Is there some way to check the number of applications connected to a mysql database?
I have two different Java applications that will be using the same instance of MySQL.
My requirement is that, I want to close the MySQL instance while closing the Java application.
But before doing so, I want to make sure the other application is not connected to it.
Is there some way I can achieve this?
Your suggestions will be of great help.
Thanks,
Sandeep

Hi,
Thanks for your response.
"Show processes" definitely serves my need.
Basically what I am trying to do is to check if there are any other open connections to a MySQL instance before closing it.
In our application suite, if there is a MySQL instance running, then the applications connect to it by default which results in some undesirable behavior sometimes.
Hence, we are making sure that we close the MySql instance before exiting the application.
Thanks,
Sandeep

Problem with reached maximum number of connections to database

Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
        at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
        ... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
        at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
        at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
        ... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
        at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
        ... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
Jelbin

Stop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri

How to find out number of connections to database?

Hi,
How can I find number of connections connected to the database 4 hours ago. For examply, if current time is 5PM and I want to see total number of connections connected to database (and from what user?) in between 1 and 2 PM, is there a way to find that out?
I see v$session has a column MACHINE from which I can use count function to check the # of concurrent connections but I am not sure how to check the # of connections that happend few hours ago. Any suggestions?
--MM

you should have audit on .. and create logon trigger and make entry in the tabe ..that would give you .
--Girish

Maximum number of connections in use?! -E71

Hi, I have this problem when I try to connect to the internet through any program. Before you rush to reply, I WANT to have multiple programs using the internet at the same time. I find it completely idiotic having to close Nokia Messaging to open my web browser. I want to be able to run Nimbuzz while running Nokia Messaging (example). Funny thing is, if I select OK when it asks me to close a connection, and then just cancel, everything works ok!! Well, for a while, and then the message pops up again.
Come on Nokia, it's just a simple solution, how hard can it be?
PS. Using E71 with the latest firmware (200)

You can use multiple applications using the internet at any time but ONLY one access point can be in use.
you cant be connected with more then one access point therefore if the different applications is set up to use different access points then you will have the maximum number of connection issues.
Just like the Computer if you are connected to the internet and you connect your phone as a modem the connection from your phone will overwrite the connection and be the default connection.
You may change the settings in the individual applications in the options > settings (may vary from applications)
Mark me a KUDOS if this has helped...

Nokia N8-00 'maximum number of connections in use'

Hi,
I have creted another APN in the Destinations-Internet settings. Put this APN on priority 1. Then I se internet an it is ok. But when I open Nokia Maps or another App. Sometimes it tries to connect to the old APN then says 'maximum number of connections in use'. Asking me for confirmation to close one connection.
So I move all APN's and Wireless connections out of the Destination Internet. Except for the new on that I want. Still the same message From time to time. How to stop thi message. Deleting an APN is not a solution I am looking for otherwise I would have done that.
Any help is appreciated.

So the on off method I posted earlier did not work. The first APN is still tring to be accessed by some apps after the phone is switched off and on again. The other things I tried..
- Removed the APN restriction and renamed the first APN. When I start the APP it now gives me a warning and lets me choose the APN. I choose the second one so greate. Close the APP. Now when I rename the fisr APN to the original name. APPS try to access it again and I get that original error.
The only thing I could do is configure the first APN name with the actual Access Point of the second APN. This worked All apps are accessing the first APN whaich was reconfigured to look like the new Second APN.
This is not a solution again it is a workaround. Does anyone-else have this problem. Or am I the only one who is configuring multiple APNs. Since my provider has multiple APNs.
I would have thought that this phone supports Multiple PDP contexts, or Secondary PDP context. It was defined in the initial 3GPP specs way back in 2003ish. Nokia can you confirm???
Cheers Peps!

Nokia E90 - Maximum number of connections in use e...

I invariably get the error - Maximum number of connections in use. Please close open connection - (this is not the exact verbiage of the message) when i connect to the gprs / wap. this started occuring after i updated my firmware from 200.x.x to 210.34.75.
The funniest part is that the application would connect to wap / gprs if i select cancel and ignore the message and continue.
If i select Yes, then i will be forced to close at least one application which is connected to the wap / gprs
I have different access points configured for each application and hence i see no reason for this error message.
Also, i never had this issue with this phone before, when i was using the same setup; separate access points for the applications which use gprs / wap.
Please advice as to how i can get rid of this message popping up every time i use wap / gprs.
Please help....
Also are there any good navigation softwares with Maps for India available, so that i can use it on my E90 and N82.

Every time you up-date the firmware, you get from your network opperator the settings for various access points (Internet, MMS, Vodafone Live, whatever....) This leads to duplicates (or even mode) access-points. Moreover, some of these access points are saved as "default" access point in various applications. This is where the mess starts.
To clean-up the mess, you first have to REMOVE all duplicate access points and keep only one access point for each purpose: Internet connection, MMS, Live (if you are are on Vodafone), etc. After this, you will probably get messages from various applications to define a new default access point. And things will be sorted our automatically.
Hope this helps, even though it might not be simple for some.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Maximum number of Connection

Hi all,
How can know or change the maximum number of connections in oracle? Any suggession?
Thanks,

try to set the "sessions" initialization parameter in init.ora of your instance.
http://download-west.oracle.com/docs/cd/A91202_01/901_doc/
server.901/a90190/ch1187.htm#944206
cheers !
regards,
Kong

How to find maximum number of users we can assign for Hyperion Planning.

HI,
How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
In Essbase propreties, the system is showing maximum planning users could be 65535.
what would be the number for concurrent scenario?
Thanks
Giri
Edited by: Giriprasad on Jun 18, 2012 2:18 AM

The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
Cheers
John
http://john-goodwin.blogspot.com/

Maximum number of connections in use. Close an act...

Hi everyone.
I try to connect my N95 to internet, using "One Touch Access" and USB. It used to be working ages ago! but now, it is impossible. it gets connected with the phone, but when i want to open a web page, it say "maximum number of connections in use. Close an active connection first", and forces me to close my Modem connection, and everything gets disconnected...
what should i do????
help please...

97268450 wrote:
when i open face book application,the same problem maximum number of connection in use. Close an active connection first. i have nokia 5233
This issue was already answered by other threads. You can click here and here for more information.
Hope this will help you.

Maximum number of connection in use. Close an acti...

When I am using nokia maps . A popup message comes in as (maximum number of connection in use . Close an active connection) and an option yes or no . When I press yes . The active connections are displayed there are only one active connections when it is disconnected . An another message comes in as connection needed to continue nokia maps . And when use no message popup again and again and I can't use maps .... I have formatted phone memory and memory card several times and I have updated phone program also . Can you please help me .
i am using Nokia 5800xpressmusic . model-5800d-1.
tankyou
Solved!
Go to Solution.

Hi virajkumar
Please bear in mind two processes involved here, OVI Maps application which may either be "Online" or "Offline" (spanner icon > Internet > Connection) and Assisted GPS feature utilizing a network access point (Menu > Applications > Location > Positioning > Positioning server > Access point).
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to set maximum number of jobs in oracle

Could pls tell explain me about how to set maximum number of jobs in oracle....
Regd,
Mahi

I don't think there is any limit on number of jobs that can be submitted to Oracle. However, there is a limit on the number of processes that would execute those jobs (governed by JOB_QUEUE_PROCESSES).
Message was edited by:
Satish Kandi
Typo corrected.

E66 - "Maximum number of connections in use. Clos...

When I try to use the web or Google Maps I get an error message: "Maximum number of connections in use. Close an active connection first."
I suspect it's related to having a connection going for automatic email but I did not have this message on my N78 or my 6120 classic. I suspect it's NOT related to my service provider since it works fine with the other phones.
The window that lets you close the active connections only has one to close. It crashes Google Maps pretty hard too.
I've got the e66-2 (NAM version) I don't know if that makes a difference. Any firmware upgrade for the e66-2 yet?
Any workaround ideas?
6133>6131>6120c>N82>N78>e66
Solved!
Go to Solution.

Try quitting the active connection and starting a connection on Google Maps first, the next time. This is not abnormal. And are you sure that you used the same provider and were able to do the same thing without closing connections in the other devices ? In my experience, this is network related.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

GUI connection error MAXIMUM NUMBER OF CONNECTION HANDLES REACHED

Dear Experts
while logging on to GUI7.10 I am getting following error
MAXIMUM NUMBER OF CONNECTION HANDLES REACHED'
'MAXIMUM NUMBER OF HANDLES REACHED'. 'NO MORE MEMORY IS AVAILABLE'.
'DO YOU WANT TO SEE DETAILED ERROR DESCRIPTION?'
When i click on yes to the question above, i get the following:
'COMPONENT = DPTM'
'RELEASE = 7.10'
'VERSION = 10'
'RETURN CODE= -16'
'Counter = 3
This error is not allowing me work.
Does anyone have a solution?

Hi,
I am having the same issue. Did you resolve the issue.
Please let me know
Regards

Why do I keep getting the message "Unable to connect to Imap server you may have exceeded the maximum number of connections to this server.

I already tried reducing the maximum number of connections to 1, but I'm still receiving the message. Is there anything else I can do?
My computer is a Mac mini running OSX 10.9.5. Firefox is version 34.0.5.

Ok, IMAP server almost universally allow multiple connections. Thunderbird as you would have observed uses 5 if they are available. As Airmail suggested, iphones just use more and more until they exhaust the available connections. There is no set maximum option.
However there are other things that can consume connections and some may surprise you.
Anti spam tools such as mail washer
Anti virus programs in their anti spam or anti phishing roles
Web mail.
The wife sharing the same account on her laptop.
That is from the top of my head. So could any of those apply.

How to check maximum number of connection ?

Similar Messages

Maybe you are looking for