How to check MI7.1's SP level quickly?

I find that it is hard to find the SP level of a given MI7.1:
1) system->status at GUI cannot show this info;
2) spam's packages need to be checked against the SP content. This way is slow
3) NO https://FQDN:50000/systeminfo because there is NO java.
Please share you experience. Thanks!

Hi Jennifer,
I am a little surprised about your finding 1....
Cause, if you go system->status, you have a first overview. So far your finding is absolutely fine, there the SP level is not shown. But have a look on the right site of the window. There the block SYSTEM DATA is shown and under the line for Component Version you have a magnifier icom. Press this icon and you will see a window with all the SP levels of the different items installed on the system. Have a look for the SAP_BASIS and SAP_ABA level, this will show ou the SP level of MI as well - cause Mi is delivered in one of these two - I am not 100% sure wich one But because they should be on the same level anyway - in my understanding of this screen and SAP update poilica - it does not matter at the end.
Hope this helps!
Regards,
Oliver

Similar Messages

How to check the current EHP stack level? in SAP

Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA     701     0007
SAP_BASIS     701     0007
PI_BASIS     701     0007
ST-PI     2008_1_700     0003
SAP_BS_FND     701     0008
SAP_BW     701     0007
SAP_AP     700     0021
WEBCUIF     700     0008
SAP_APPL     604     0008
SAP_HR     604     0029
SAP_HRCAR     604     0029
SAP_HRCAT     604     0029
SAP_HRCAU     604     0029
SAP_HRCBE     604     0029
SAP_HRCBR     604     0029
SAP_HRCCA     604     0029
SAP_HRCCH     604     0029
SAP_HRCCL     604     0029
SAP_HRCCN     604     0029
SAP_HRCDE     604     0029
SAP_HRCDK     604     0029
SAP_HRCES     604     0029
SAP_HRCFI     604     0029
SAP_HRCFR     604     0029
SAP_HRCGB     604     0031
SAP_HRCHK     604     0029
SAP_HRCID     604     0029
SAP_HRCIE     604     0029
SAP_HRCIN     604     0029
SAP_HRCIT     604     0029
SAP_HRCJP     604     0029
SAP_HRCKR     604     0029
SAP_HRCMX     604     0029
SAP_HRCMY     604     0029
SAP_HRCNL     604     0029
SAP_HRCNO     604     0029
SAP_HRCNZ     604     0029
SAP_HRCPH     604     0029
SAP_HRCPT     604     0029
SAP_HRCRU     604     0029
SAP_HRCSE     604     0029
SAP_HRCSG     604     0029
SAP_HRCTH     604     0029
SAP_HRCTW     604     0029
SAP_HRCUN     604     0029
SAP_HRCUS     604     0029
SAP_HRCVE     604     0029
SAP_HRCZA     604     0029
SAP_HRGXX     604     0029
SAP_HRRXX     604     0029
EA-IPPE     400     0018
EA-APPL     604     0008
EA-DFPS     600     0018
EA-FINSERV     604     0007
EA-GLTRADE     604     0008
EA-HR     604     0029
EA-HRCAR     604     0029
EA-HRCAT     604     0029
EA-HRCAU     604     0029
EA-HRCBE     604     0029
EA-HRCBR     604     0029
EA-HRCCA     604     0029
EA-HRCCH     604     0029
EA-HRCCN     604     0029
EA-HRCDE     604     0029
EA-HRCDK     604     0029
EA-HRCES     604     0029
EA-HRCFI     604     0029
EA-HRCFR     604     0029
EA-HRCGB     604     0029
EA-HRCHK     604     0029
EA-HRCID     604     0029
EA-HRCIE     604     0029
EA-HRCIN     604     0029
EA-HRCIT     604     0029
EA-HRCJP     604     0029
EA-HRCKR     604     0029
EA-HRCMX     604     0029
EA-HRCMY     604     0029
EA-HRCNL     604     0029
EA-HRCNO     604     0029
EA-HRCNZ     604     0029
EA-HRCPH     604     0029
EA-HRCPT     604     0029
EA-HRCRU     604     0029
EA-HRCSE     604     0029
EA-HRCSG     604     0029
EA-HRCTH     604     0029
EA-HRCTW     604     0029
EA-HRCUN     604     0029
EA-HRCUS     604     0029
EA-HRCVE     604     0029
EA-HRCZA     604     0029
EA-HRGXX     604     0029
EA-HRRXX     604     0029
EA-PS     604     0007
EA-RETAIL     604     0007
FINBASIS     604     0008
ECC-DIMP     600     0018
ERECRUIT     604     0008
FI-CA     604     0008
FI-CAX     604     0007
INSURANCE     600     0018
IS-CWM     600     0018
IS-H     600     0024
IS-M     600     0018
IS-OIL     600     0018
IS-PS-CA     604     0007
IS-UT     600     0018
LSOFE     600     0018
SEM-BW     604     0008
ST-A/PI     01M_ECC600     0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AM

Hi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori

In ecatt - how to check at database level using ABAP

Hi,
How to check at database level using ABAP in Ecatt tool.
say,for example I want to check a particular sales order is invoiced or not ,at the database level and if it is invoiced I have stop proceeding to invoicing of that sales order number.
Could anybody suggest on this with an example?
thanks.

Hi,
you can use the command GETTAB to access single db records.
Full specified or partitial specified keys can be use at GETTAB. It will return always only one record, also if a couple could match your selection.
For more advanced scenarios you can also use eCATTs Inline ABAP. In a block between the commands ABAP. ENDABAP. you can code ABAP statements, e.g. SELECT ... INTO TABLE ...
eCATT script parameters of type 'V' defined in that script using ABAP/ENDABAP will be transfered into the ABAP block and back to script after ABAP perform.
Best regards
Jens

How to check the row level security in TOAD for oracle

Hi ,
for ex, i have 2 types of users
normal user and super user
super user can see the group set (some column name) created by normal user
but normal user can not see the set created by super user
this set crestion aslso has 3 types "U','P',S'
P & S can be viewed by even normal user
but U should not
so here we are having some row level security for the normal user .....
So, in TOAD for oracle how to check that......
Let me know if i'm not clear

Like
I'm the super user....
And some records are inserted to a table by different users ('a' , 'b', etc....)
So,if user 'a' logins then he can be able to see only the records inserted by 'a' only...
how to see in TOAD where such type of scripts (filter conditions) are written.....

How to check plan line items for plan cost at network activity level?

Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
Jessie

Hi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit

How to check ink levels of a 4620 using windows 8.1

How to check ink levels of a 4620 using windows 8.1

Hi krmoss,
Welcome to the HP Support forums. I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.
The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”. If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to check GL & RG patchset level.

Hi,
How to check GL & RG patchset level?
Any script ?
thanks

--query to get family packs
SELECT      a.application_name,
fa.application_short_name,
          b.status,
          b.application_id,
          b.patch_level
FROM apps.fnd_application_tl a,
          apps.fnd_product_installations b,
apps.fnd_application fa
WHERE a.LANGUAGE = 'US'
AND a.application_id = b.application_id
AND a.application_id = fa.application_id
and fa.application_short_name='&APP_SHORT_NAME'
ORDER BY APPLICATION_NAME
Use SQLGL and RG.
Hope this answers your question
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant

How to check ink level of HP 3500 series deskjet printer's cartridge?

How to check ink level of my new HP deskjet 3510 e-All-in-one printer's ink cartridge?

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to check patch level in SAP 6.0 ?

how to check patch level in SAP 6.0 ?
is there any T code available for this
thnx in advance

Hello,
In note [1076022|http://service.sap.com/sap/support/notes/1076022] we can see:
b) Minimum support package levels and SAP kernel patch levels
   For non-SAP BW systems the minimum 700 SAP_BASIS support package level is SP14.
   For SAP BW systems, the minimum 700 SAP_BASIS support package level is SP16 and the minimum 700 SAP_BW support package level is SP18.
   Please consult note 1152240 for the minimum DbSl kernel patch level and the minimum JDBC driver requirements.
Regards,
Eduardo

How to check for the prerequisite Support pack level

We are planning to upgrade from 4.7 to ECC6..How can check ,what is minimum support pack level that needs to be maintained in 4.7 for the upgrdade to ECC6.
Can i check this in Servrice markrt place .if so please let me know where to check
Thanks

Hello,
I am sure you will find relevant information in the link below.
https://websmp207.sap-ag.de/upgrade
Regards,
Manoj Chintawar

No Low Ink Notification / How to check ink levels

I don't know how it disappeared, but I no longer have an HP icon, and never get low ink notifications. I have nothing "HP" in program files, so can't figure out how to check the ink levels. Every time I lose color I have to change both cartridges. Printer prints fine. Any suggestions? Hopefully I don't have to disconnect everything and start installation over - there's always a chance it won't work when I'm done. Technologically inclined Im not. Thanks for any assistance you can give. Printer is PSC1510 All-In-One.
Message Edited by paz88 on 03-21-2009 10:10 AM

If you press the Cancel and the Start Copy Color button on this printer at the same time and release them, it'll print a Self Test Report that'll have an ink level gauge on it. you can check it there.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

How to check ink levels on hp d110 in Windows 7

How do I check the ink level of my D110 printer in the Windows 7 program?

Hi there,
I understand you are wanting to check the ink levels on your Photosmart D110 printer, but no longer have the Solution Center program to do so. I can definitely help you with that. Please click here and this document will show you how to check the ink levels on the front of the printer and in the Solution Center.
Hopefully this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How to check IGS version and procedure for upgrading IGS patch level

Hi all,
We are on BIW 3.5 .Iam not clear about how to check the version of IGS and its patch level .I went through various notes but still iam confused with tracing it , can someone plz help out?
Secondly want to upgrade IGS version i went through note 454042 but still confused with doing that , Can someone plz refer other notes or detailed procedure for upgrading IGS.
Our BIW Production and Test are on AIX and Development is on HP-Unix OS .
Points guaranteed for the same. Requested to revert at earliest as this is urgent .
Regards,
Saumya

Hi,
Check this link which may help u:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/igs-upgrade-1455477
The installation/upgrade procedures for the integrated IGS are as follows:
Integrated Version Installation
The integrated IGS is automatically installed with the SAP Web Application Server.
Integrated Version Upgrade
You find the upgrade files for the integrated IGS version on the SAP Service Marketplace:
http://service.sap.com/swdc ® Download ® Support Packages and Patches ® Entry by ApplicationGroup ® SAP Frontend Components ® SAP IGS ® SAP IGS .
There, you find the IGS executables and libraries (igsexe_.sar) as well as the IGS folder structure (igshelper_.sar) containing among others font files.
With the upgrade files of the executables and libraries, proceed exactly like you would with kernel patches (for example, extract the Archive to the same location). More information about kernel patches can be found in the related note 19466 in the section Copying and Installing a Patch.
The upgrade files for the IGS folder structure must be extracted to the instance directory (DIR_INSTANCE). More information can be found in note 1028690.
After a restart of the Web AS the new IGS is up and running.
Information about finding out your IGS patch level is provided in note 931900.
For an upgrade of an integrated IGS please also check note 896400.
For more info check this SAP Help doc:
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
Hope these helps u...
Regards,
KK.

How can check rollup level and autoconfigure or not on 11i

Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks first

portcommand wrote:
Hello;
I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks firstUsing AutoConfig to Manage System Configurations with Oracle Applications 11i [ID 165195.1]
Autoconfig FAQ [ID 218089.1] -- 7. Is AutoConfig compatible with Oracle Applications 11.5.x?
How to check, which EBS Techstack Patchsets have been applied on 11i or Release 12.1.x ? [ID 390864.1]
How to Get The Patchset Level of Oracle Applications Products in R12 [ID 550654.1]
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
Thanks,
Hussein

HOW TO CHECK THE STACK LEVEL OF ECC 6.0

Hi experts,
please tell me how to find out the system stack level of ECC 6.0. When i have checked the system status, in the kernal information sup.pkg.lvl is showing 133 can any one explain what is it.
Thank you

Hi,
it's shows the support pack level of kernel.
patch 133 is quiet old you need to upgrade your kernel.
check Note 19466 - Downloading SAP kernel patches
regards,
kaushal

How to check MI7.1's SP level quickly?

Similar Messages

Maybe you are looking for