How to check my level of standard of Java project

Hi,
I have finished a simple project in Java(Mostly swing),
MS-Access,JFreeReport.Then manual testing is also finished.
Now I want to test the coding,GUI desing and all that is simply I want to test the standard of the project.My plan for this is to use some test automation tools.
So Will you plkease which software I have to test my Java Project?
Thank you so much .
Meena.

Hi Kumar12463,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • How to check ink levels of a 4620 using windows 8.1

    How to check ink levels of a 4620 using windows 8.1

    Hi krmoss,
    Welcome to the HP Support forums.  I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.  
    The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”.   If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to check ink level of HP 3500 series deskjet printer's cartridge?

    How to check ink level of my new HP deskjet 3510 e-All-in-one printer's ink cartridge?

    Hi Kumar12463,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Deskjet 3510 and needing to check ink levels. HP Print and Scan Doctor.
    In this document choose this option to check the printer's ink levels and to view the cartridge details such as install dates, warranty dates, and serial numbers under review additional hardware functions.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to check patch level in SAP 6.0 ?

    how to check patch level in SAP 6.0 ?
    is there any T code available for this
    thnx in advance

    Hello,
    In note [1076022|http://service.sap.com/sap/support/notes/1076022] we can see:
    b) Minimum support package levels and SAP kernel patch levels
       For non-SAP BW systems the minimum 700 SAP_BASIS support package level is SP14.
       For SAP BW systems, the minimum 700 SAP_BASIS support package level is SP16 and the minimum 700 SAP_BW support package level is SP18.
       Please consult note 1152240 for the minimum DbSl kernel patch level and the minimum JDBC driver requirements.
    Regards,
    Eduardo

  • Can u tell me how to check my computer ip address in java (please help me)

    hi to all, can u tell me how to check my computer ip adress in java, what is the command for that

    import java.net package in your code.
    Then where you need to find the IP, please insert the following code.
    InetAddress inAddr = InetAddress.getLocalHost();
    String ipAddr = inAddr.getHostAddress();
    That should do it.
    Best Wishes,
    Ramanujam

  • No Low Ink Notification / How to check ink levels

    I don't know how it disappeared, but I no longer have an HP icon, and never get low ink notifications.  I have nothing "HP" in program files, so can't figure out how to check the ink levels.  Every time I lose color I have to change both cartridges.  Printer prints fine.  Any suggestions?  Hopefully I don't have to disconnect everything and start installation over - there's always a chance it won't work when I'm done.  Technologically inclined Im not.  Thanks for any assistance you can give.  Printer is PSC1510 All-In-One.
    Message Edited by paz88 on 03-21-2009 10:10 AM

    If you press the Cancel and the Start Copy Color button on this printer at the same time and release them, it'll print a Self Test Report that'll have an ink level gauge on it. you can check it there.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • How to check ink levels on hp d110 in Windows 7

    How do I check the ink level of my D110 printer in the Windows 7 program?

    Hi there,
    I understand you are wanting to check the ink levels on your Photosmart D110 printer, but no longer have the Solution Center program to do so. I can definitely help you with that. Please click here and this document will show you how to check the ink levels on the front of the printer and in the Solution Center.
    Hopefully this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How to check the calculation of standard price in ECC.

    Hello All
    I have a datasource 0co_pc_act_05 material valuation prices which  has the standard price. Now I would like to check how this standard price is calculated in ECC ( I mean on what basis it is calculated).
    I have spoke to my Business folks they say it should be (Quantity/per) * Amt.... How can I check the formula of standard price in ECC.
    Thanks
    Yeachni

    This extractor is based on table MBEW and standard price (STPRS) exists in the table. I don't think there is any logic is extracting this.

  • How can check rollup level and autoconfigure or not on 11i

    Hello;
    I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks first

    portcommand wrote:
    Hello;
    I installed a vis 11i, wondering how can I check my rollup level and autoconfigure or not, please give advice. -thanks firstUsing AutoConfig to Manage System Configurations with Oracle Applications 11i [ID 165195.1]
    Autoconfig FAQ [ID 218089.1] -- 7. Is AutoConfig compatible with Oracle Applications 11.5.x?
    How to check, which EBS Techstack Patchsets have been applied on 11i or Release 12.1.x ? [ID 390864.1]
    How to Get The Patchset Level of Oracle Applications Products in R12 [ID 550654.1]
    Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
    Thanks,
    Hussein

  • How to check firmware level on 5140i and GPS cover...

    Hello!
    How do I check firmware level on my 5140i and my GPS cover?
    Upgrade is not something I can do myself I guess (service shop only) or?
    Is it usual to have 2-3 minutes to get a fix point with the GPS?
    Is it normal to have just 4 hours of GPS before batery needs to be loaded again? Hten GPs has a limited usuage.
    /Patrik

    Thanks Glyn -- I opened up the airport utility summary page and it says version 7.3.1 and update is grayed out so looks like I am good to go.
    Another question -- when I open the finder to get to the airport utility, the preview shows airport utility application version 5.3.1 but the summary page says 7.3.1.
    Why the difference?
    Thanks again

  • How to check patch level applied or not?

    how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
    - FA.M mini-pack or later
    or
    - FIN_PF.E or later
    and
    -ATG H RUP4() or higher
    thanks

    Hi;
    how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
    - FA.M mini-pack or later
    or
    - FIN_PF.E or later
    and
    -ATG H RUP4() or higherPlease check :
    - How to check which Techstack patchsets have been applied [390864.1 ]
    Regard
    Helios

  • How to check battery level?

    Is there a way to check the battery level on the iPod Touch? I recently acquired a new 32 GB Touch, and the first thing I did was upgrade to the 2.0 software. I have been unable to find an option or menu that will tell me how much battery life I have remaining.
    In looking around I was able to find that on the iPhone there's a Settings > General > Usage menu, but I don't have that on my Touch.
    All I ever get is the 20% remaining warning message. Is there no other way to determine how the battery is doing?
    Thanks for the help...
    -Gary

    Hard to believe they don't have something that tells you where you're at. The icon is okay, but is not as helpful as an approximate percentage or number of minutes remaining. I realize battery life remaining can change drastically, say if you start watching a movie, but it would be nice to have something a little more substantial.
    I submitted feedback...thanks for the link.
    -Gary

  • How to check Patch level of AR, TCA modules?

    Hi,
    EBS 11.5.10.2
    database 10.2.0.4.0
    I am trying to get the Patch level of AR, TCA. Can anyone share with me the process to get from SQL Query?
    Thanks

    Rathina wrote:
    trying to get the Patch level of AR, TCA. Can anyone share with me the process to get from SQL Query?Hi,
    You can check the patchset level of all modules by running the adutconf.sql under $AD_TOP/sql/ directory.It wil create/update the adutconf.lst on same location
    in that you can able to see the status of each module (is it installed/shared /inactive ) and current patchset version
    Alternatively you can try the sql query given in the note 420648.1 :How to Establish if a Product is Installed in e-Business Suite
    -Rk
    select * from fnd_application_all_view where application_name like '%In%';
    select * from fnd_product_installations;
    select * from fnd_module_installations;may help you.my senior showed me this way.capture the first short name first from product_installation then try to find the patchset level.
    regards
    Edited by: new2appsdba on Jul 19, 2010 4:30 AM

  • How to check ink level in printer cartridge

    i just finished installing my C4180 all-in-one printer on my new HP dv6 notebook running windows 7
    i cleaned and aligned the ink cartridges, but my black is still printing poorly
    i want to check the ink level in the cartridge before i buy a new cartridge, but the windows 7 solution center is somewhat different from xp
    the solution center tells me that the ink levels are not currently available and when i click on the printer toolbox, i get nothing
    the icon at the bottom of the solution center gives me a big green checkmark, but does not give me any useful information
    how can i get better info about my ink levels?
    thanks
    frank hershenson

    Hello frankjh,
    Welcome to the HP Support Forums!
    Checking the ink levels on the HP Photosmart C4180 can be done a couple ways, from the front panel of the printer or the software installed on the computer.
    It is usually not the easiest to see but the ink levels should be displayed in the lower left corner of the C4180 display screen. A small icon looking like a yield sign may be present, if so this is stating it is low.
    Since you have tried to use the HP solution Center on the computer in attempt to gather the information and where not able due to an error, you may need to uninstall and install the C4180 on the computer.
    Here is the guide to uninstall: Uninstalling the Printer Software. When ready to install download the software from here: HP Photosmart C3100/C4100 All-in-One Printer series Full Feature Software and Driver.
    I hope this helps, please reply if you need anymore help
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to check resource existance using standard web-services?

    Hi,
    There was the web-service KMNodeServiceStrdWSVi_Document in the SAP EP 7.0 that exposed the function "exists" checking whether the folder exists or not.
    SAP EP 7.3 does not contain KMNodeServiceStrdWSVi_Document web-service and I did not find any function in the  RepositoryFramework web-service.
    Is there any other web-service providing this functionality?
    Thanks in advance.

    Hi Arun,
    I got the data in the context in the response node .But the problem is that the web service returns an array of objects which inturns has array ob object, I m only able to get those values from the response node from the context which are simple string type.Could u pls tell me how can i get the complex data which is present in the response node in the context.
    Can i traverse the node(i.e) the rray in the context.CAn u tell me wat can i do.The response node has the complex structure as defined in the WSDL file ,i just need to get the data present in the array of that context which is populated by the web service.

Maybe you are looking for

  • OIM 11g R2 - Setting a field as mandatory while provisioning through catalo

    Hi, May I know how i can make a field as mandatory (Red Asterick) while trying to provision an account through catalog wizard.I dont see any option to set required=true while creating a form for an application instance.Thanks.

  • Make-To-Order MRP for components with unstricted-use stock

    Dear Experts, There is a finished goods of material with standard planning strategy group "20" in the material master. There is a component e.g. material A, under the BOM of the FG material. There is already enough unrestricted stock for material A w

  • HP C4700 printer disc (xp,vista,​win7) Have win8.1. can't install. Help

    I can get the printer to work using a USB cable, but want to go wireless.  My disc is outdated, I guess.  When I open the disc, it tells me to hit "Install". When I do, it closes.  I purchased this desk top 6 months ago and had another internet provi

  • Unable to access some sites

    Hello,         Over the past few days, when I use my smartphone (or computer) connected to the LAN (Verizon FiOS - Actiontec router - rev i), I am unable to get to some sites (s4gru.com or kwiksetkevo.com). The browser returns a "couldn't connect mes

  • EOS Rebel SL1 -- Photos aren't uploading

    Hi there, I use my Rebel SL1 nearly everyday, and I've never had trouble uploading photos by either inserting the SD card into my desktop or using the camera cord to upload the photos to my desktop. However, I took about 20 pictures over Christmas an