How to check my route exam validity?

i had taken my route exam few days back but its not showing in certification tracking system.
can cany one tell me how to track my route exam validity.

Give it a couple of days to get loaded into the system. It will be there within the week and then you'll see your information.

Similar Messages

I am planning to take unlocked iphone5 which is from USA, let me to know how to check the phone is valid ?

i am planning to take unlocked iphone5 which is from USA, let me to know how to check the phone is valid ?.How can i check is that properly unlocked, stolen and service.

IF you can actually yet purchase an unlocked iPhone4 8GB from the US Retail stores is not clear
They are certainly available from Apple.com but only if you have a US credit card and a US delivery address
I suspect you do not fit this requirement
You also have to be careful as the Apple Retail stores sell no contract iPhones these are NOT unlocked
However if you are able to purchase an unlocked iPhone4 8GB then it will certainly work with the Approved carriers in India

How to check pc file path validity?

Hi,
   In my program I have to extract so much SAP data and write in a file in the fornt-end PC. In the selection screen I will input the filepath\name to write the data.
But how should I check whether the filepath is valid or not in the 'AT SELECTION-SCREEN' event itself? so that if it is not valid path, I can give an error message before extracting all the SAP data.
Thank you!
Sunitha.

Hi Sunitha,
Please check the following sample code from other thread at selection screen value request event.
Using ABAP Objects:
PARAMETER : p_file LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR path.
DATA: directory TYPE string,
      filetable TYPE filetable,
      line      TYPE LINE OF filetable,
      rc        TYPE i.
CALL METHOD cl_gui_frontend_services=>get_temp_directory
CHANGING
      temp_dir = directory.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
      window_title      = 'SELECT THE FILE'
      initial_directory = directory
      file_filter       = '*.XLS'
      multiselection    = ' '
    CHANGING
      file_table        = filetable
      rc                = rc.
IF rc = 1.
READ TABLE filetable INDEX 1 INTO line.
P_FILE = line-filename.
ENDIF.
Using Normal ABAP:
DATA: P_FILE LIKE RLGRAP-FILENAME,
      DPATH LIKE RLGRAP-FILENAME,
      UPATH LIKE RLGRAP-FILENAME,
      MODE TYPE C,
      FLG_UD TYPE C.
CALL FUNCTION 'WS_ULDL_PATH'
IMPORTING
    DOWNLOAD_PATH = DPATH
    UPLOAD_PATH   = UPATH.
IF FLG_UD <> 'D'.
DPATH = UPATH.
MODE = 'O'.
ELSE.
MODE = 'S'.
ENDIF.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
    DEF_FILENAME     = '*.XLS'
    DEF_PATH         = DPATH
    MASK             = ',*.XLS,*.*,*.*.'
    MODE             = MODE
IMPORTING
    FILENAME         = P_FILE
EXCEPTIONS
    SELECTION_CANCEL = 3.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
Hope this will help.
Regards,
Ferry Lianto

How to check my router Speed

Hello:
I have notices that some of you speak about "pinging" to get a router speed. Please excuse my ignorance but how do I do this "ping". I vaguely recall our IT guy at work typing soming similar after accessing a window that looked liked DOS. I have an XP and a Vista system.
Thanks.

On your Computer click on Start - RUN - type "cmd" and click ok... Now in the Command Prompt window you need to type "ping yahoo.com -t" and hit enter and you will get the replies and it will display you the time for each replies.

How to check users inputs

hi,there
i am developing an on-line shop,at the end of checking out process , the users are supposed to submit a details form which including first name ,surname, address,email, phone no, card number etc. Can any one tell me how to check those details are valid before sending to database by using javabean or taglib.
any information is helpful , thanks in advance.

You have three choices:
(1) Client-side checking using JavaScript,
(2) Server-side checking using JavaBeans,
(3) Both.
You can check on the client side using JavaScript to make sure that e-mail address formats are valid, numbers are numbers, strings are the right length and format, dates are correct for the locale, etc. You might want to look at the JSTL I18N capabilities here to make sure your pages can handle different locales. This saves you a network roundtrip if something is formatted incorrectly.
The server-side checking is different: it makes sure that the input satisfies business rules. You can check for correct format again if you wish, OR assume that the client has already taken care of this. (Depends on how paranoid you want to be.) The business rules for correctness belong on the server side, not in the client.
I'd recommend both. They really are two different kinds of checks.
MOD

How to check current input/output rate on router subintenterface via SNMP?

How to check current input/output rate on router (2821, etc..) subintenterface via SNMP, like cacti monitoring system.
I cant find OID to make this with snmpwalk.
Or there is no way to check current load by this way? Only polling?
P.S. Ethernet subinterface, of course.
With great respect, S.A.

Hi,
Try to use:
1.3.6.1.4.1.9.2.2.1.1.6 - InBitRate
1.3.6.1.4.1.9.2.2.1.1.8 - OutBitRate
1.3.6.1.4.1.9.2.2.1.1.28 - ifDescription

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>

There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit

How to check CRL validity time from client?

Hello,
I have one Windows Server 2003 R2 working as Standalone CA. It provides certificate for one of our internal IIS website.
I have decreased CRL publish interval from 1 week -> 1 day and Published new CRL.
However, our webserver is propably not aware of new CRL publishing interval changed on CA, because I suppose webserver has cached CRL locally.
My question is, how to check cached CRL validity time from our webserver? Its running Windows Server 2003 R2.
I attempted to run following command on webserver with 0 results: certutil -urlcache crl

You basically have to wait it out when you are running an 11 year old operating system
The certutil -urlcache CRL command was introduced in Windows Server 2008/Vista.
The deletion/inspection of cached CRL data was not really an option in Server 2003
Brian

HT1338 When we check for updates, how do we know they are valid and not malware?

When we check for updates, how do we know they are valid and not malware?

If they are from Software Update they are valid.
You can also go to
http://support.apple.com/downloads/
Then click on the app (not download it) and you will see this...
http://support.apple.com/kb/DL1426 and check the security SHA.

Will the expiring CCNP route exam still be valid with the newer Troubleshoot and switch 2.0 exams?

Hi everyone,
I plan on taking my CCNP (route) exam within the next month but I just notice that the exam will only be valid until Jan of 2015. Now my question is that if I take the exam older exam will it still be valid to combine the newer "Trouble shoot 2.0" and "Switch 2.0"? I would like to take the current route test instead of the newer version becaue I've been studying it but I like to know if it will be uselss or not when combining the other to make myself an official CCNP certification holder.

I have found on search:
Q. Can I mix the current exams with newer exams to achieve CCNP Routing and Switching?
A. Yes, it is possible to mix version 1 and version 2 exams, but if you completed version 1 exams for ROUTE or SWITCH, then you will need to prepare version 2 ROUTE & SWITCH as well in order to pass the TSHOOT v2 exam because the TSHOOT v2 exam assumes knowledge of ROUTE v2 and SWITCH v2 topics.
The answer is unclear, yes you can mix, but you will have to prepare for version 2. I hope it's wrong information.

I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

Ignore it. 'itunes:order' is a recent addition which FeedValidator doesn't know about. If your podcast is rejected that is unlikely to be the reason. Of course as you haven't posted the feed URL nor the text of the error message I can't make any further comment.

How to check CSI validity

how to check CSI validity

hi,
use these tables to get bom details.
STPO          BOM Item Details
STPU          BOM Sub Items (designators)
STKO         BOM Header Details
MAST         BOM Group to Material
STZU          BOM History Records
STAS          BOM Item Selection
STPF           BOM Explosion Structure .

How to make BOL as mandatory validation check

Hi All,
I have a requirement to make BOL field in ASN as mandatory and system should not allow to create 2nd ASN with same BOL number.
Regards,
CK

Hi CK,
The BOL number validation is not there in standard yet. ASN creation does not look for the BOL number. If you really want to have such a validation you could think of implementing the check within your implementation of the validation framework. You might have to introduce check in the custom validation profile and use the BADI /SCMB/BOL_VALFRMWRK to implement the validation check.
This is only feasible way you can meet your requirement.
Thanks,
Nikhil

How to assign BOM & Routing to Prod Version.

Dear Frndz,
Pls tell me how to assign BOM & Routing to Prod Version.This is to execute the REM flow.
Regards,
Srini

Hi,
Step1. Create Material MM01
Step2. Create BOM CS01
Step3. Create Rate Routing CA21
Step4. In MM02 for the above material, go to MRP4 View and click on production version pushbutton, and give Version Number and description and the validity dates and rem allowd indicator and then double click on the version line, it will take u to another screen, there you Select rate routing and assign the group & group counter in Planning Data and then in BOM Data u enter Alt BOM & BOM Usage details. For rem tick on REM Allowed check box and then click on Check, if all the assignment is OK then it will give you a message saying BOM & ROUTING available. Save the material master.
Regards
Vinod

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to check my route exam validity?

Similar Messages

Maybe you are looking for