How to check network providor
OK, I recently bough a second hand iPhone off ebay which was locked, i was fine with that knowing I could just buy a SIM from the carrier. But I can't seem to find what carrier this iPhone is using.
Is there a way to find out which network, from the Serial Number, IMEI or something?
Doubtful.
You would likely have to ask the seller.
Similar Messages
-
How to check network gateway information
Hi ,
I want to check the network getway address and other network configuration of my Mac System. Is there any way to check through the Mac system.Go into the router administration GUI through a browser and the router admin password. In one of the basic screens it will mention the gateway address. I realise you did say 'the Mac system; and may mean you want to do it without going outside the Mac. Was there a reason for that? The address listing in the Network utility on the Mac is not as clear as that on the router which is the gateway.
-
How to check plan line items for plan cost at network activity level?
Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
JessieHi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit -
How to check a network connected system is in power on?
How to check whether a network connected system is in power on through its ip address? Is there a simple way in java to check that?
ThanksHow to check whether a network connected system is in
power on through its ip address? Is there a simple
way in java to check that?If you know that it normally has a server listening on a given port, then you can try to establish a connection on that port.
If the connection succeeds, it's powered on.
If the connection fails, you cannot know whether it's powered on or not. It may be on, but the server isn't running. It may be on with server running but the network path to that host may have a problem. It may be on, server running, good network path, etc., but the server may be very busy and the connection attempt may timeout. etc. -
I can't sign into face time. My account has been verified and I have full wifi signal but it comes up with check network connection how to i fix this?
What IP does your iPad show as having?
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8. 8.8.4.4 -
How to check MAC address from host from local network
Hello,
I must save information about my network enviroment, at some periods of time (IP, Host Name, MAC Address, and later some information from SNMP). I have IP addresses of all devices. Could any one have an idea how to check MAC address. In java.net.* I didn't find anythink about my problem.
Please give my an answer, if you konow any solution.
Marcin Kowalskihi !
I've typed ipconfig on my PC which has windows2000 pro. as the OS!!
but i couldn't get th line you've mentioned "Physical Address" !!
what could be wrong .. ?!! hope you could help!!
thanks!!
C:\>ipconfig
Windows 2000 IP Configuration
Ethernet adapter
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.130.128.210
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.130.128.1 -
How to check connection from SAP to reservation system?
Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta -
Hii
how to check mobile credit balance...?
my ios version is 7.1.1
my network in INDIA
while enter the *123# ...it will going a call...
no balance ll comeing
so please find the solution for thisAsk your carrier.
-
How to show network status in top toolbar?
how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help
Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here. -
I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799 -
I have successfully downloaded Itunes, however, when I click on the IStore an error message pops up "check network connection and try again". My network connection works perfectly and I have disabled all firewall and security programs. I've tried uninstall and reinstall several times and still get error message. Does anyone know how to get around this? THANKS!
Hi..
Open System Preferences > Security & Privacy > Firewall
Make sure the Firewall is turned off. You may need to click the gold lock icon to make changes.
Using FaceTime behind a firewall
Apple - Support - FaceTime -
hi,
How to monitor network load i.e. bytes sent/recieved.what is your operating system?
refer the links, hope this may helps you.
http://hoopercharles.wordpress.com/2010/08/19/network-monitoring-experimentations-7/
http://www.remote-dba.net/t_tuning_monitoring_network.htm
http://www.activexperts.com/activmonitor/check/database/oracle/ -
How to check if the GPS Antenna works?!?!?
Dear all,
I've a "small" problem.
As most of you have experienced I cannot fix the signal from the satellite.
I tried everything...45°, open sky (I tried even in open sea!!!) etc...
So my doubt is the following: how can I be sure that my antenna is working?
Do you know if a SW to verify it exists????
Do you know how to check it???
If yes, pleaseeeeee tell me!!
cheers
MArcoNo - there's no software which can tell whether the GPS antenna is working or not. Within Maps v2 in the bottom right hand corner there is an indicator which will let you know once it has obtained a satellite lock - but not whether the actual hardware is working or not.
Having said that I have never come across any instances where the GPS antenna has not worked on a phone. What phone do you have ?
You should definitely have got a lock after 3 hours !
It is definitely worth checking your settings. Make sure you quit Maps before doing this.
Goto the menu, click Tools then Settings.
Then click General and choose Positioning.
Within here click Positioning methods.
Ensure the options below are ticked :
- Assisted GPS
- Integrated GPS
- Network based
However please be aware that for Assisted GPS and network based, your network operators will charge you for any data transmitted.
Then load Maps again and give it some time to get a lock.
Please let me know how you get on.
Regards,
Edward -
How to check no. of NIC cards which are available in Solaris 9 server.
How to check no. of NIC cards which are available in Solaris 9 server.
Regards,
Dinesh.Hi
For list network cards that was sometime registered in system:
grep network /etc/path_to_inst | awk ' { print substr($3,2,length($3) -2 ) $2 } '
ifconfig -a show all network interfaces that curently configured
For check that interface that was listen at first comand available or not: Try
ifconfg <interface_name> plumb
ifconfg <interface_name> unplumb
Do not touch already configured interface or lost network connection.
Regards. -
How to check during logon if an SAP ECC6.0 (ABAP) user is in Microsoft ADS
Hello
How to check during logon if an SAP ECC6.0 (ABAP) user is in Microsoft Active Directory Services.
I would like to prevent logon to ABAP system for users not present in Microsoft Active Directory Services
Thank you in advanceHave you looked at setting the SNC functionality for lookups against AD? Here's a link that might be helpful: [Secure Network Communications |http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e6/56f466e99a11d1a5b00000e835363f/frameset.htm]
[Configuring SNC on AS ABAP |http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e6/56f466e99a11d1a5b00000e835363f/frameset.htm]
Hope that is helpful.
J. Haynes
Maybe you are looking for
-
How to make Open Sales Orders consider unallocated stocks in MRP run
Dear Experts, Maerial BOM MATERIAL TYPE STRATEGY GROUP PLANNING STRATEGY DESCRIPTION Req-DM Req-CU 3. TF180TK fert
-
I bought my daughter an i-pod when she was around 7 or 8. At Christmas time when people asked me what she wanted I said an itunes gift card! Lots of people bought her one and so to keep them safe I put some in a safe place for when she was older... a
-
QuickTime 7.3.1 will not install on Tiger. Anyone else experiencing this?
I updated my computer's software yesterday. The computer successfully updated iTunes, iPhoto, GarageBand, and the update to 10.4.11. The problem is when the computer went to install QuickTime 7.3.1, it had an error and did not install. Therefore, Gar
-
Mile stone billing with Down payment clearing
Hi, Urgent help needed. I need to set up mile stone billing plan at item level with down payment getting automatically offset with Invoice ie, I have 10% down payment (FAZ). And mile stone invoicing of 40% and 60% each. I have raised down payment req
-
When I try to send email, I got the following exception, javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.SendFailedException: Invalid Addresses; nested exception is: class javax.mail.SendFailedException: 550 <[em